It is sixty years since Sweden's first star-shaped housing estate was built in Gröndal, a suburb of Stockholm. Olle Engkvist, the building contractor, was the Driving force behind the residential area and it was designed by architects Sven Backström and Leif Reinius. The estate comprises detached star-shaped houses suited to a more hilly terrain and terraced star-shaped houses on the flat land. The eight gardens of the terraced houses form the shape of a hexagon. It is these gardens, designed by Sven Hermelin and Per Friberg, which are the main focus of this thesis. The buildings on the estate have recently been renovated and it is now time for the gardens to be restored.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

Trade is the Driving force for economic development. A greater equity in international trade can improve the livelihoods and the well being of producers in developing countries. The small-scale farmers have limited resources and have difficulties to get access to the international market. As a result of this, the Fair Trade movement has been developed and has now formed a trading partnership between the producer and the consumer. This study analyses if the Fair Trade movement can be a way for the workers in developing countries to achieve more justice in their production manner in the international trade of cut flowers and continue to be an important competitor of these products, but with better livelihood conditions. My method has been to do a comprehensive literature study of the Fair Trade movement, in which I describe the certification process, and the market of Fair Trade in Sweden.

This thesis describes the introduction of Web 2.0 education into Swedish LIS education with emphasis on the Driving forces and obstacles in the process. It also discusses the possibilities of estimating the appropriate time for the start of new educational courses introducing new technologies, when it is uncertain if the technologies in question will sustain for a long enough period of time to make the educational effort worthwhile. The data on the Web 2.0 education was collected during the spring of 2010 from the Web pages of the five LIS departments in Sweden, namely Borås, Lund, Umeå, Uppsala and Växjö, as well as by 10 interviews during November and December 2010 with two representatives from each LIS department..The key finding is that Web 2.0 is covered in Swedish LIS education and embracing both practical and theoretical issues. The main Driving forces have been both the needs of the profession and an academic research interest. It is concluded that Rogers??S-curves? as described in ?Diffusion of Innovation? can be used as a tool in order to improve the understanding of when to introduce education in new technologies.

SammanfattningDagens robotgräsklippare från Husqvarna har en lyftsensor vilken bygger på attkarossen kan röra sig vertikalt i förhållande till chassiet. Detta leder dock till attlösningen i kombination med krocksensorerna gör att karossen förmedlar en icke solidkänsla när potentiella kunder prövar produkten. Husqvarna hoppas att man får flerkunder om det är möjligt att ge produkten en solidare känsla. Ett steg mot detta mål äratt utveckla en ny, icke mekanisk lyftsensor.Ett antal koncept för att lösa problemet har utvecklats och utifrån dessa har ett antallösningar utvecklats. De lösningar vilka har visat sig problematiska jämfört medkravspecifikationen har förkastats och intressanta lösningar undersökts I detalj.Ett koncept har utvecklats till prototyp och det är en lösning med Force sensingresistors? vilka används för att mäta trycket från de fyra infästningspunkter vilka finnsmellan kaross och chassi.

Previous research regarding the European debt crisis has mostly focused on the purely economic aspects of the crisis. However, there is a strong ?Protestant-Catholic? dimension in Europe, where historically Protestant countries are more prosperous than their Catholic and Orthodox counterparts. This has especially been a fact since early 2010, when several countries within the European Union had their credit ratings downgraded. Is this phenomenon merely a coincidence? Or could the roots of the recent troubles in Europe have a basis in historic religions? To tackle this question, Max Webers ?s 110 year old study The Protestant Ethic and the Spirit of Capitalism is brought back into light and used as a tool for analysis of the crisis.The results show that not only are Protestant countries in general more prosperous, but they also have lower corruption and their citizens have a higher level of trust towards the government.

Health care is increasingly complex, which increases the demand for knowledge and expertise. Despite this, the share of specialized nurses, including anaesthesia nurses, has decreased from 65% to 48% from year 1995 to year 2008, according to statistics from the National Board of Health and Welfare (Socialstyrelsen) in 2010. Studies indicate that there may be various factors in the work environment that anaesthesia nurses, choose to leave the anaesthesia profession. The purpose of this study was to examine how anaesthesia nurses experienced the physical and psychosocial work. The study was conducted as a descriptive study with qualitative approach.

The calf extrator?s function has been studied, through measuring traction and how this varies in different situations, in comparison with corresponding manual traction situations. This was done against the background that excessive force at assisted calvings at dystocia can mean life threatening damages on the calf such as grave acidosis, vertebral fractures, femur fractures and rib fractures. The calf extractor has earlier been measured to pull with greater force than the established maximum force of ?two strong men?.

Germany has experienced low birth rates ever since the 1970s when they fell below the replacement levels of 2,1 children per woman. Since then, their birth rate has been around 1,5 children per woman, which has caused an overall aging population. The consequences of the declining birth rates is that the previous generations are becoming larger than the younger generations. This demographic shift raises concern about how its potential implications might affect different aspects of the country and its economy overall. The aim of this paper is to try to discern the dynamic between the share of the labor force in relation to total population, with the share of pensioners in relation to the total population.

The aim of this thesis is to examine how salesperson control can be exercised in a retail store environment. A case study has been performed on a Swedish fashion company emphasizing the relationship between the company?s upper level management and their retail store operations in order to describe, analyze and classify the prevailing management control mechanisms. The paper presents an agency theoretical approach to the relationship applying behavior- and outcome based control theory, performance measurement theory and incentives theory in order to give a comprehensive image of the control system. The main finding is that the company?s management control system as applied to the sales force in its retail stores can be categorized as mainly behavior-based despite several explicit outcome-based features..

Syftet med denna undersökning har varit att kartlägga vad som driver människor att söka sig till eller anta mellanchefspositioner. En kvalitativ intervjustudie har genomförts utifrån en induktiv ansats då intresseområdet tidigare har varit obeforskat och ambitionen har varit att undersöka det unika inom detta. Tio intervjuer har utförts i vilka samtliga respondenter, vid undersökningstillfället, har befunnit sig på mellanchefspositioner inom antingen privat- eller offentlig sektor. Data har transkriberats och senare analyserats utifrån en induktiv tematisk analys vilken har resulterat i fyra övergripande teman för vad som driver människor att söka sig till eller anta mellanchefspositioner. Dessa teman benämns som: Utvecklingen ? en strävan efter utveckling på det personliga planet, Makten ? att ha makt och därigenom kunna påverka såväl organisationen som sin egen arbetssituation, Att klättra i karriären ? mellanchefspositionen som en fas i karriären på väg uppåt i karriärvärlden, Bekräftelsen ? en önskan om att bli omtyckt, att få bekräftelse från folk i sin omgivning för att man har lyckats åstadkomma något.

AimThe study aims to highlight and discuss students 'and teachers ' conceptions of teaching in the element of dance in physical education.IssuesHow do teachers work with teaching of dance in physical education in secondary school?How do students perceive the teaching of dance in physical education in secondary school?MethodThis study used a qualitative approach with semi structured interviews. Two teachers in two schools were interviewed and two focus groups of five students each were interviewed. One school is located north of Stockholm and the other one east of Stockholm. The interviews were recorded with a cellphone and transcribed.

This thesis is a cultural theoretical case study of the art project (O)önskad samhällsförbättring.Via an analysis of the project, that is based on theories of power, resistance and contemporaryurban development, it examines the construction of urban space, its impact on public art including the ability of art to initiate evolvement of the urban public space.The last decades art has plaid an important role in what is called the creative city; to become attractive nodal points of the global economy, larger cities increasingly invest in art,culture and creative industry. Simultaneously the urban public space is limited to activitiesand expressions of art that are presumed to create economic growth. This introduces animpression of what is allowed and what is not allowed, possible and not possible, wished andnot wished which, as a consequence, evolves the public space. The events during the artproject and the reactions that followed enlightened these limitations. This tells a story, not only about the structuring process of the local urban space, but also important changes that are created as a simultaneous effect at different levels in society, as well locally as globally.

Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.