Sweden signed, in 1992, the Convention on Biological Diversity (CBD) and has thus assumed responsibility for the indigenous biodiversity. That also means that Sweden has a conservation responsibility for the Swedish Friesian (SLB) (SJV, 2007a). In a survey conducted by the Board of Agriculture (SJV) in 1996, it appeared that there were around 780 cows and heifers of the SLB breed (SJV, 1997). SJV did in 2006 a plan for the development of livestock genet-ic resources and the number of cows of SLB was estimated at approximately 200. This meant that the SLB was in need of being conserved and SJV assumed it would be categorized as threatened.The primary objective of conservation of a breed is to reduce the loss of the original genetic variation (Lacy et al., 1995).

During the past years fire has been identified as an important factor for nature conservation in the forest landscape. To accurately quantify the size of a burnt area is obviously important, but also to quantify the degree of fire damage to the tree canopy. Such data are important for assessing the conservation value, and to support planning and management of the burned area in the future. I have examined how to estimate the status of tree crowns after fire from interpretation of aerial photographs. This is possible because fire changes the structure of tree crowns and this influences the colours in aerial photographs by spectral reflection. Included in the study are four areas, three of which burned in 2005 and one in 2006.

The study was carried out at the Kungsängen Research Centre, Department of Animal Nutrition and Management, Swedish University of Agriculture Sciences, Uppsala. The technical development in dairy production has resulted in a housing system where feeding and milking is done automatically without human contact, a so called automatic milking system. The motives for utilising an automatic milking system, is to increase the animal welfare and to decrease the need for manual labour. However, the system does involve a change for the animals, among the effects is the deprival or the diminishment of a chance for synchronous behaviour and the animals have to agree among themselves in which order they use the feeding stations and the milking unit itself. How and if this affects the animals well-being and production is yet to be solved. A possible way to form an opinion on this, is to study the animals ranking order along with hormone profiles and production. The purpose of this work was to study the effect of low- vs.

AbstractDuring recent years the climate in recruiting new personnel has hardened as a result of high levels of employment and increasing competition in labour market. In order to resolve this problem, organisations have to adapt new strategies to attract and meet the demands of potential employees who have the required competence to meet job requirements.The aim of this study has been to examine a well functioning work place in order to elucidate explicit examples of what employees consider positive, and what can be ascertained as positive Deviations. Narratives emanating from the unit manager and personnel illustrate their views on the positive influences found in their working place. Another ambition is to increase awareness and understanding about the factors that promote satisfaction in the workplace and positive Deviation; and to utilise this knowledge.Traditional research on organisations has frequently focused on problems. The theoretical point of departure of this study is based on Positive Organizational Scholarship, abbreviated as POS.

Samhället är uppbyggt av organisationer som i olika grad kan vara i behov av styrning för att upprätthålla en viss funktion. Studiens syfte är att undersöka hur organisationer inom privat sektor konkret tillämpar styrning och hur arbetet med styrning följs upp. Forskningsfrågor som besvaras är: vad bidrar styrning med till en organisation och dess måluppfyllelse samt på vilket sätt påverkar styrningen hur ledningen använder och arbetar med resultat samt avvikelser? Studien är kvalitativ där datainsamlingen gjorts med semistrukturerade-intervjuer samt genom fenomenografi, det vill säga med en kvalitativ inriktad empirisk forskningsansats. Urvalet av respondenter gjordes inom Västra Götaland där ett 20-tal privata organisationer kontaktades för att erhålla svar om deltagande från potentiella respondenter.

Visualization plays a key role in the concept of Lean. Lean was developed in Japan as a business philosophy in order to lead to an activity, where only steps that contribute to customer value of the final product are being performed. By defining the customer value and establish visualized standards, it is possible to see when situations differ from the standard. Then it?s possible to lead the process back on track.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

In todays competitive business climate the concept of ?quality management? is a significant part of daily work for many companies, as they want to achieve high performance quality and delivery success. Within the services sector third-party logistics companies play an increasingly central role when it comes to the goods that are being transported. These companies are presented with continuous challenges to ensure that goods are loaded on trucks efficiently and delivered on time, at the right place and in the right condition. The present case study was conducted in collaboration with Schenker AB and Schenker Åkeri in Jönköping, to help these two company branches serving under the same major corporation to solve a common problem they both encounter, namely the fact that it regularly occurs handling abnormalities in the terminal process that affects overall quality for customers.The study aims to find out how the daily quality control concerning the handling of goods in the terminal process can be improved hopefully resulting in a higher quality in cargo shipments.

In this project, we are studying the material flow and the information flow of sample materials and the appurtenant report of Deviation for the purpose to be able to suggest better solutions. The sample material, which is to be analysed, is to be continuously taken from the production flow. The purpose is to navigate the process by the results found by the analysis. Because of this, it's very important that both methods of analysis are ensured and that the sample material is representative for the production flow. However, even more importantly, is that activities and transportations, combined with both flows, must perform in a quick and correct way in order to maintain or improve Höganäs AB's competitive strength.According to reports are about 20 products per day not available, for loading, at the time of delivery.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

SammanfattningSegerström Automotive tillverkar plåtkomponenter till kunder som Scania, Stiga och Volvo. Företaget befinner sig i en expansiv fas, men konkurrensen på marknaden är hård och kraven på god kvalitet höga. Företaget är kvalitets- och miljöcertifierat. Som del i förbättrings- och kvalitetsarbetet har en nystart av verksamhetens produktionssystem, SAPS (Segerström Automotive Production System), skett. Ett av företagets mål för de närmsta åren är att minska antalet externa reklamationer.

This report is made as a literature review, focusing on the work done to increase understanding of efficiency in the categories of substations and secondary heating systems, with respect to the Deviation from the theoretically possible cooling off in the distribution network as well as the economic benefit that appear. The main purpose of a considerable part of the literature used in this report addresses the issue of identifying individual causes of reduced cooling in district heating systems. These literature resources have been compiled and summarized as part of the report.The technology of district heating is associated with benefits such as better use of the energy in a fuel. This is the case of cogeneration plants where serial generation of electricity and thermal energy increases efficiency compared with the parallel generation where heat is generated locally and electricity is generated centrally. Serial generation thus allows for lower primary energy demand.

AbstractIntroduction: Hand Arm Risk Assessment Method (HARM) is a tool to assess the risks of deve­lo­ping complaints of the arm, neck or shoulders during manual work. The method was developed in the Netherlands primarily for employers, but is also used as an aid to work environment in­spec­tors. The purpose of this study was to evaluate the HARM-method for assessment of biomecha­nical exposure of the upper limbs when performing manual tasks as well as its suitability to be used within work environment inspection. Methods: Ten labour inspectors conducted assessments of five video-recorded work tasks. Assess­ments made with HARM were compared with those made with the Assessment of Re­pe­titive Tasks (ART) tool and with ACGIH Hand Actvity Level (HAL) - both methods for assess­ment of bio­mecha­nical exposure of the upper limbs - and with the model for the assessment of re­pe­titive work in the pro­visions of the Swedish Work Environ­ment Autho­rity on ergonomics for the prevention of mus­culo­skeletal disorders, AFS 1998:1.

Serum thymidine kinase 1 (TK1) activity is used as a tumor marker in disease monitoring in veterinary and human medicine. TK1, an intracellular enzyme, is involved in a salvage pathway of DNA precursor synthesis. TK1 is used in DNA precursor production by catalyzing the transfer of the gamma-phosphate-group from a phosphate-donor to the 5?- hydroxyl-group of thymidine forming thymidine-monophosphate. Nucleoside monophosphosphates are finally converted into thymidine-triphosphates. TK1 activity significantly rises in the G1 and the S phase of the cell cycle.