More than half of the implemented IT-projects go over budget, deadline or simply fail. The processes in an IT-project requires technical competence to be present among the project participants to ensure the achievement of business goals and to make organisations competitive. The success of an IT-project largely depends on the project manager which makes it interesting to further investigate what impact the project manager?s technical competence has on the project. Previous research shows differing opinions whether technical competence is considered important for the project manager to be successful or not.

My goal with this Project was to create four pictures which de¬scribed four different emotions. The purpose of the project was that the pictures would be placed in a psychology department and they could use them as a starting point for a discussion about the patients? emotions. My personal purpose was that I wanted to create pictures in scale 1:1 in an analogue fashion, and try to learn more about how people see and feel about pictures. What kind of thoughts can a picture give you? Can I create a picture which can be used as a platform for a discussion? Can I make a picture which describes an emotion? The making of the pictures started with developing ideas and then I took photographs of my friend Joel, in different situations and moods, which I used as reference for my paintings.

The division of Electricity at Uppsala University is developing a wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a wave energy converter of Seabased AB was developed.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

In this thesis I will propose and test a pipeline for creating in-game animations using motion capture technology, with the aim to export to a 3D game engine, such as UDK or similar. Even though there are already established pipelines for creating in-game animations in the game industry, they are not of public knowledge and dissemination of information is hindered by the severe NDA (non-disclosure agreements) imposed on the studios and artists. I will therefore use my experience with game production and as a student, to research and propose an optimal pipeline for developing in-game animation that may be used by other students, researchers and independent game developers. The methodology used to test the pipeline will be a case study based on the student project Synergy, which I am developing with other third year students also attending the Game design Education at Gotland University..

This degree project was conducted in collaboration with Gremo AB located in Ätran.The aim of the project was to develop a solution to secure quality and to help assemblingthe locknut holding the vertical hinge on the harvesters and foresters from Gremo.At this time the nut is assembled manually by the aid of an overhead crane. The nut istightened differently from time to time, and there was no specified torque to which it istightened. Another present problem was the locking washer which sometimes getsdamaged during assembly, when this happens the procedure has to be started over fromthe beginning. The current assembly procedure is very time consuming and lengthy forthe employees.Our task was to design a machine that could tighten the nut to a specified torque with amargin of error of ± 3%. The assembly procedure will be held simple and the timerequired at a minimum.The project started by developing several principle solutions, the one solution that bestmatched our specifications were developed to a primary solution.Today we have started manufacturing and assembling our prototype.

This project concerns a new lower and mid level compulsory school in the currently developing area of Annedal, northwest of central Stockholm. According to the given program, the school should hold 500 pupils and 100 pre-school children. As an addition to the given program, my suggustion holds a sports hall and a public library.In my project, my ambition has been to investigate how to create an inspiring and exiting place for kids to inhabit and, at the same time, create an activated, central place in a developing suburb. The latter has resulted in the two program-related additions, which purposes is to extend the hours during which the area is activated and to create additional incitements for visiting the building. Both additions are chosen based on lack of service in the area. Architectually, I've been inspired by the medieval castle which has been used as an inspirational resource for the parts of the school holding classrooms.

The number of ideas at innovative companies usually exceeds the amount of available human ormaterial recourses, this include ideas for development of new products. Since they are not able to doeverything they want to do they have to choose between ideas to develop new products. This includesthe decision on when to start, stop or kill a project as well as the thought process of prioritizing betweenongoing and potential projects.Project Portfolio Management (PPM) is an organizational process, with the purpose of systematicallyorganizing and running the activities that aim to evaluate, select and prioritize ideas and projects fordeveloping new products. PPM include four major goals to be fulfilled; Maximizing Value of thePortfolio, Achieving a Balanced Portfolio, Achieving a Strategic Alignment and Running the RightNumber of Projects.The purpose of the thesis was to develop a more visual and formal PPM process for the early stages inproduct development in one department at St Jude Medical AB, Sweden.The thesis was conducted by following a methodology known as Process Modules. The methodology isan approach for developing a PPM process that fits a specific company.

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

This is a qualitative study with a hermeneutic and partially inductive approach. The study?s purpose is to enhance the understanding of young adults experiences of unemployment and the importance of being employed. In this study, eight young adults participate in the project Framtid Kronoberg. The youths are 19-25 years of age.

The theme of this essay is literacy training in pre-school. The theme takes it starting point in a project, where my colleagues and I noticed our children playing with writing and symbols. It leads to an exciting, reflecting and Developing project, a project that will go on for six months together with twenty children in the age of five and six.The essay describes how I and the rest of the staff work with the project, and also how we try to find challenges that are meaningful for our children. When we worked with the project I ended up in a dilemma how I as a teacher was to retain the children?s joy and curiosity for writing without making it boring.

The use of mobile devices has during the last years expanded and on the market you can see a huge amount of applications. The development of mobile applications differs from traditional systems development since mobility infers that mobile applications can be used in different technological and social contexts. Although previous research has recognized that mobility can present mobile application developers with certain challenges, empirical studies of how problems arise and how they can be handled has thus far been limited. In this study we focused on the requirements engineering process from a development view with the purpose of finding challenges emerging in the development process. The study is based on a qualitative case study that employed semi-structured interviews with both project managers and system developers active in the requirements process.

Physical activity can reduce the risk of developing dementia, and studies show that people who already have some form of the disease can get a better memory function and find it easier to perform daily tasks if the activity is performed regularly. People who are diagnosed with dementia are generally not offered physical activity to a high extent, nor is there a wide range of equipment developed to suit the target group.The Bike Around project was launched during a workshop in Copenhagen and was organized by HCH and Techna Science with the aim to develop new training equipment for people with dementia. The workshop resulted in the development of a customized training bike where the user can get a biking experience from his wheelchair or favorite chair. By integrating the pedal movement with a prerecorded movie projected on a screen, the memory can be stimulated both visually and by the activity itself.Our assignment in the project consisted of three parts: design of the bike, movie playback and software programming. During the project a prototype has been created that meets the requirements of ergonomics and usability..

The theme of this essay is literacy training in pre-school. The theme takes it starting point in a project, where my colleagues and I noticed our children playing with writing and symbols. It leads to an exciting, reflecting and Developing project, a project that will go on for six months together with twenty children in the age of five and six.The essay describes how I and the rest of the staff work with the project, and also how we try to find challenges that are meaningful for our children. When we worked with the project I ended up in a dilemma how I as a teacher was to retain the children?s joy and curiosity for writing without making it boring.