The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

The purpose of this study has been to make an inventory of combustible waste in the region around Norrköping and to investigate the composition of domestic waste, industrial waste and two different types of sludge. The work was performed at the request of Norrköping Miljö & Energi, due to the planning of an incineration plant. The inventory of the waste was performed through inspection of environmental impact reports, from waste disposal plants in a number of local government areas in the region. The quantities were also compared to another inventory, carried out in a different way. The characterisation of the wastes was compared to the fuel specification determined by Norrköping Miljö & Energi.

This degree project contains a theoretical and a practical part about magazine design. Literature aboutthe subject?s typography and magazine design has been studied and put into practice on the professionaljournal Ingenjören. Besides of that a study about the history of magazine typography for the lastfifty years has been done.Typography and other design factors are important for the magazine to be readable and gives at thesame time the magazine an identity of its own, which has become more and more important throughoutthe last decades.The result of this degree project is a new design for Ingenjören, a design that agrees more with howthe journal want to be considered. A new template, a dummy and a manual have been produced.

This thesis examines the relationship between the marginalization of ornamentation during functionalist modernism and the effect it had on female graphic design practice. By examining the historiography from a gender and feminist theory of history I present a different way of interpreting, not only the history of graphic design but also the concept of graphic design. This thesis does not reach a conclusive result, instead it sets the foundation for further research and illustrates the opportunities that we as graphic designers have to benefit contemporary graphic design by critically reviewing and redefining our history through a diverse historiography..

Research is a time-consuming endeavor which requires appropriate tools to manage often vast amounts of information. Militarization 2.0 is a research project aiming to explore Militarization in social media. The aim of this project is to design a user interface for supporting researchers in projects involving large amounts of data in qualitative studies. The project will follow the design process of the first version of the Militarization 2.0 research database interface. The design process involves user studies, interviews and design and testing of paper and digital prototypes.

During the migration season in 2013 a study on spawning migrating salmon and the effect of water flow on the behavior was conducted of the salmon at the Forshaga hydropower station in the River Klarälven. The River Klarälven with its nine hydropower plants on the Swedish side, constituting migration obstacles for the migrating salmon. Fortum Generation AB has together with the County Administrative Board restored a salmon trap at the lowermost hydropower station in Forshaga, aiming at making it possible for the salmon to swim into the trap, and thereafter be transported by truck past the power plants and then continue their journey to the spawning grounds on their own. Unfortunately, it is believed that the trap does not work as well as it should. In this study, I focused on salmon position in relation to water flow and if the number of salmon that swam into the fish trap differed between salmon with previous experience of the trap (experienced) and salmon without experience (unexperienced).

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

I projektet, som är ett examensarbete från programmet högskoleingenjör i teknisk design vid Luleå tekniska universitet, har ett koncept på en delvis förarlös bil tagits fram. Arbetet har utförts mot instutitionen för arbetsvetenskap och har givit värdefull erfarenheter inför fortsatta studier vid Umeå Institute of Design. Resultatet är en lyxig fyradörrars kupé med tänkt lansering omkring år 2020. Bilen sköter till största delen av tiden körningen på egen hand men tillåter även manuell körning på ett nytt och revolutionerande sätt. Fordonet är även en social mötesplats där passagerarna får uppleva en ny dimension av att resa med bil..

Most companies have a bottleneck in their production, that is a constraining re-source. When the demand is higher than the capacity in the constraining resource it is impossible to produce the demanded output. This problem leads to delayed deliveries, unhappy customers and ultimately to decreased revenue. Bottlenecks therefore has a significant role in production and must be handled thereof.MW Power in Sävsjö, Sweden designs and manufactures water and steam boilers for the customer's unique needs. MW Power invested in a new plasma cutting ma-chine but the machine has not reached the expected capacity.

I ?Skolbarns hälsovanor? har sedan 1985 frågan ?Vad tycker du om skolan nu för tiden?? funnits med. Skoltrivseln minskar med åldern och till skillnad från många andra frågor skiljer sig pojkars och flickors uppfattning i denna fråga mest i den yngsta åldersgruppen, då flickorna i högre utsträckning uppger att de trivs mycket bra i skolan (Svenska barns hälsovanor, FHI 2005). I den här studien undersöks hur åtta 12-åriga svenska skolflickor i en västsvensk småstad upplever sin skolvardag. Min metod har varit att fastställa deras KASAM-värde genom en enkät (Margalit & Efrati, 1996) baserad på Antonovskys frågeformulär för att mäta Känsla Av Sammanhang (Antonovsky, 1987)och sedan intervjua dem enskilt om trivsel, flow och beröm i skolan.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

Responsiv design syftar till att en webbsida ska anpassa sig efter anva?ndarens enhet, oavsett enhetens ska?rmstorlek. Arbetet har ga?tt ut pa? att ta reda pa? om man kan utveckla en framga?ngsrik responsiv design som fungerar pa? ma?nga typer av enheter enbart med en persondator som utvecklingsplattform, och pa? sa? sa?tt undvika att beho?va genomga? en stor process med testning. Resultaten visar att det a?r fullt mo?jligt. .

IT-företaget Medius tillhandahåller en produkt för ärendehantering, Medius Flow. I denna produkt finns ett visst stöd för dokumenthantering, närmare bestämt en möjlighet att klassificera dokument och lagra dem via Medius Flow. En av Medius kunder har efterfrågat mer funktionalitet och möjligheter att kunna sätta rättigheter på dokument, alltså bestämma vem som ska ha tillgång till ett specifikt dokument.Examensarbetet har gått ut på att undersöka olika lösningar för att implementera dokumenthantering i Medius Flow, utvärdera dessa och sedan implementera den lösning som verkar vara bäst.Efter att en kundintervju utförts framkom krav på systemet i form av bland annat utökade rättighetsfunktioner, möjlighet att skapa arbetsflöden och att man lätt ska kunna hitta dokumenten.Tre olika lösningsförslag togs fram. Det första gick ut på att vidareutveckla den dokumenthantering som finns i Medius Flow idag. Det andra gick ut på att använda sig av ett tredjepartsdokumenthanteringssystem och sedan bygga en integration mellan Medius Flow och detta system.

The purpose of current paper is to identify the differences (ifany) between Swedish and Turkish consumers in terms ofproduct design perception and to identify the differences toproduct design in relating the four dimensions / characteristics:1.Aesthetical attractiveness, 2.Functionality, 3.Value and4.Quality.The findings of the study indicate the existence of a universal perception of design. Despite the culturally different countries that are examined the empirical material consistently display similarities between the two countries. Both the quantitative and qualitative data point to a very similar perception in terms of design. The possibilities of global design are discussed for companies as well as managerial implications and future research..

Transcending sound design is possible. There are unseen possibilities and a great potential for improvement and development in sound and music design ? but there is a great difficulty penetrating the obstacles that lies in the way for such development to take place and to exist. The difficulties in being negotiable and productive lies more within the limits of the audience it has to gain, than in itself. It is as though music and sound design has to evolve very slowly, in an almost evolutionary style; one step at a time, to be accepted.