The development of IT systems is usually accomplished by some form of system development methodology. It can be performed as the waterfall method, where each phase is completed before the next begins. One of the reasons to follow a development methodology is that the process is more structured, faster and that the product will have higher quality. One risk of not using a system development approach is that the code can be unstructured and difficult to maintain.This paper describes an alternative method in which the development occurred without the use of any system development methodology. This has been possible because there was a clear goal of the program that should be developed.

The author contacted designers Claesson Koivisto Rune Arkitektkontor in August 2007regarding his Master thesis at KTH. The company had discussed the possibility of creating achair made from molded pulp. The author was taken on as a manager for the project. Theobjective was to produce design documentation for a paper pulp chair which was to belaunched at the in 2008 Milan Furniture Fair. The purpose of the thesis was to develop aproduct with scientific methods as well as to investigate how to make collaboration betweendesigners and engineers easier through communication.The project went through four basic stages: Information, Analysis, Synthesis and Evaluation.Information on paper pulp, molded pulp, chair design, sitting postures and the existingmarket of molded pulp furniture.

More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

The basis for this study is the question of what happens at the point of impact between receiver and message in the case of a social marketing campaign on Facebook promoting sustainable travel. Hence the aim of this study is to analyse the reception of the social marketing campaign Fairadise in a sample of 19 individuals. The design of the study is therefore reception analysis with the help of four focus groups and thematic analysis to later identify patterns and themes in the gathered material. The theoretical approaches were collected from the field of media and communication and focused on public communication campaigns, public understanding of public communication campaigns as well as decoding of messages. The questions posed were; how is the Facebook campaign Fairadise received by the focus group participants? How do the participants read (decode) the campaign; dominant, negotiated or oppositional? And what assessments do the participants have regarding the visual versus textual information in the campaign? Previous research has shown that visual and emotional attributes are of great importance when it comes to interpreting messages about sustainable tourism and that rational information attributes are of less importance. The findings in this study agree with this previous research except when it comes to rational information.

The aims of the following project has beento make a proposition how to create aspecific kind of transformer. Thefollowing report evaluates the differentimportant variables and contains asuggestion for a possible design. Intheory it's an ordinary transformer that'ssuppose to transform electrical effect toa high voltage line. The design of thetransformer is using an already existingcurrent transformer design and is adjustedto work for it's specific purpose. Theproject also contains the developing of atransformer simulation model that will beused to evaluate and optimize thedimensions of the resulting transformer..

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

During the year 2014, Artex AB has worked to launch a new product whose function is to locally purify the air. The product is a headboard and its purpose is to give the user clean air while sleeping. The air purifier has different speeds and it`s up to the user to choose which effect that will be on. To get the best experience of the product as possible, the air purifier shall be controlled by a mobile application. In that way the user can increase and decrease the fan speed, even when the user not is home.

Sweden introduced a development assistance policy in 1952 and thirteen years later Sida, Swedish International Development Cooperation Agency started, in 1965. But in 1995, five separate development assistance authorities came together and established the new Sida as it is today. Sida is Sweden?s representative in the development assistance policy field and they work through projects that have to be presented through a Country Strategy Process (CSP). The aim of this paper is to point out Sida?s perspective on the conducted development assistance policy and what guide lines that are followed.

SammanfattningTitel:En ny arena ? Upplevelsens roll och dess utvecklingspotential Nivå:C-nivå Författare:Niclas Edman och Thommy Guttman Handledare:Patrik Gottfridsson Datum:Maj 2012 Syfte:Syftet med uppsatsen är att ta reda på vilken betydelse arenan har för upplevelsen på ett idrottsevenemang och vilken finansiell roll denna spelar. Samtidigt vill vi öka förståelsen kring hur klubbarna arbetar för att göra arenaprojektet hållbart över tid. Metod:Vår undersökning är kvalitativ och har gjorts genom intervjuer med representanter från fyra olika allsvenska klubbar. Teori:Den teoretiska delen bygger på forskning om utveckling av projekt samt litteratur och vetenskapliga artiklar om arenautveckling.

This study examines how and why organizations evaluate training and development within the organizations. The study has a qualitative approach based on semi-structured interviews, with office and organization development managers. The purpose of the study is to contribute with knowledge about how three large Swedish organizations evaluates training and development programs for staff members. Another purpose is to describe why the organizations evaluate training and development programs and to research if there is a further need to develop the organization evaluation methods. Therefore the research questions are Why and how do organizations evaluate training programs? What further need is there to develop organizations evaluation methods?The conclusion of this study shows that evaluation of the training and development programs are not a high priority among the selected organizations.

In the urban planning debate of today, two strategies for city development stand out as each other's opposites, urban sprawl and smart growth. This thesis concerns a development project of the latter kind and aims to give an alternative proposal to new buildings and a park in a Swedish city block. The term sprawl is used for new developments on virgin soil on the outskirts of cities leading to a city spreading, while smart growth stand for increased city density through development on re-used land within the city boundaries. The latter are often seen as more sustainable in many levels and are also shown to have positive effects on a number of city functions. At the same time smart growth has negative consequences on other aspects of the city such as public open spaces.

Foreign direct investment (FDI) is widely regarded as a significant catalyst for economic development especially in emerging and developing economies. While previous research has found different effects from foreign direct investments in different countries this study aims to explore the varying effects of FDI in Serbia and Montenegro. The study focuses on how FDI influences key economic indicators, specifically GDP per capita and employment rates, in the context of their aspirations to join the European Union (EU). Employing a comparative approach, the thesis examines the differing trajectories of Montenegro and Serbia in utilizing FDI for economic advancement. The research reveals that while Serbia shows significant positive correlation between FDI and both GDP per capita and employment rates, Montenegro displays no significant relationship in these aspects.

Jag kommer i denna uppsats beskriva den designprocess som pågått vid skapandet av en webbaserad informationsplattform från koncept till slutprodukt.Mitt uppdrag har varit att effektivisera en webbyrås nuvarande sätt att hantera och sprida information på, som bestod av en blandning mellan digital och analog information, och skapa en ny webbaserad informationsplattform. Den nya webbaserade informationsplattformen ska kunna samla all information på en plats och skapa ett effektivare informationsutbyte mellan de anställda på företaget.Jag har använt mig av två teoretiska ramverk; Nielsens tio heuristics samt Krugs visuella design hierarki.Jag har arbetat nära beställaren för att kunna skräddarsy webbplatsen till deras behov.Resultatet efter ett omfattande arbete med designmallar och front-end kodning blev grunden för webbyråns webbaserade informationsplattform, utvecklad för att effektivisera spridningen av information på företaget..

This paper examines the European Commission?s, newly established, ?Register of interest representatives? The analysis is divided in two parts, first I analyze the registers purpose, the kind, and detail, of information it contains and the different kinds of groups that are supposed to register. After that I analyze the organizations in the register more thoroughly, using a database of my own creation. The database was constructed with information drawn from the register, as well as information from external sources. Regarding the design and purpose of the register, I find that improvements in the design are needed, if the register is to fulfill its purpose.

During the development of microwave based sensors such as radar target seekers, input signals are needed to verify the performance of the system. Therefore, a channel board has been developed by previous thesis projects at Saab Bofors Dynamics. It uses a technique called Digital Radio Frequency Memory (DRFM). The purpose of this board is to sample and digitally store radio frequency signals in order to reconstruct them after a certain delay.The aim of this thesis project was to use the channel board named above to construct a portable instrument for generation of stimuli signals. This assignment has been divided into two tasks: firstly, to construct and put together the hardware components and secondly, to implement a graphical user interface for the instrument.