In Sweden the work of reducing acidification and its prime cause; emission and Deposition of sulphur dioxide, has been going on for decades. Despite of all the work that has been done the positive progress in the acidified areas is slow. This is partly due to a long recovery time for the acidified areas but also because the reductions of emission and Deposition of sulphur dioxide have not been large enough. Emissions of sulphur dioxide from land based source in Sweden are estimated to 34 000 tons in the year of 2010. During the same year, approximately 182 000 tons of sulphur dioxide will be deposited over the Swedish territory.

The project explores the possibilities of using additive manufacturing (3d-printing) to build architecture. Through a combination of theoretical research and practical experiments a building system has been developed which has the capabilities to create houses with great geometric flexibilities to a affordable price today. The construction system Perimeter is demonstrated in a pavilion situated at Norra Djurgården in Stockholm. .

The knowledge of the chloride content and its fluxes and patterns in trees is insufficient. Increased knowledge would be desirable, one of many reasons is to be able to more efficiently meet the problems that the substance causes in the pulp industry. The purpose of this study was to examine and describe the chloride concentration of Norwegian spruce (Picea abies L. Karst.) in the south of Sweden. Furthermore the aim was to be able to predict chloride concentration from readily measurable site factors.

Streams and riparian zone are closely linked by reciprocal flows of energy and nutrients. A large part of the transportation from water to land is in form of emerged aquatic insects. Conversion of land from forest to agriculture can greatly affect aquatic ecosystems, and due to the close link, also affect the adjacent terrestral zone. Investigating how the presence of agriculture in the surrounding area affects amounts of emergent aquatic insects gives an indication on how agriculture, in turn, may affect the terrestral enviroment. The study was preformed alongside ten streams in northern Sweden; five in landscape transformed by agriculture and five in undisturbed forest areas.

The increasing oil prices during the last years have made it profitable to use cereal grains as a fuel. When compared with wood, cereals contain higher amounts of Cl, S and ash. The Cl and S content makes the gases from cereal combustion more corrosive than gases from wood combustion. The goal of this master thesis was to find out the variation of Cl, S and ash content for oat grain grown under different conditions. Oats was chosen because in Sweden it's considered as the cereal with the best fuel qualities.

Nitrogen Deposition leads to environmental damage in areas where the nitrogen Deposition is high. Southwest Sweden receives an annual nitrogen Deposition of up to 20 kg N/ha. Nitrogen that is not assimilated by the vegetation is accumulated in the soil, which may lead to nitrogen saturation and an elevated risk of nitrogen leaching. Nitrogen leaching from forest areas in southern Sweden has proven to be higher than from agricultural areas, which have been thought to be the main contributors to elevated nitrogen levels in rivers and lakes. The amount of nitrogen that leaches depends on the fraction of the total nitrogen in the soil that consists of nitrate, since nitrate is easily transported through the soil.

The acid Deposition of sulphur- and nitrogenoxides from combustion of coal and oil cause acidification that lowers pH and gives increased contents of metals and altered aquatic biodiversity in the stream. The liming of lakes and streams, which was introduced to resist the acidification, demand large economic resourses despite of the decreased Deposition of the acidifyng substances. Some of the streams are influenced by the acid Deposition, while others are naturally acidic. It is therefore importaint to separate the anthropogenically acidified waters from the naturally acidic, in order to optimize the use of governmental fundings for liming. This thesis aims to estimate the acidity status and impact of acidification on 24 catchments upstream liming dispensers, which is part of the liming activities at the County of Dalarna.The acidity status of the streams was classified according to the Swedish Environmental Protection Agency old classification system (Naturvårdsverket 1999) as very acid to acid, with small ability to withstand a pH-change (alkalinity) due to acid Deposition.

The purpose of this report is to find a model of statistics for construction and demolition waste, which makes it useful for the local manager at the building site. The intention with the model is that it will be used as a support of the local manager, to direct his project towards reduced strain of the environment. The model will also be used to make it easier to control that the claims from authority and aims for the environment are achieved. To familiarise with the subject waste handling within the building and construction sectorI have done a literature search. I have also been studying rules and regulations regarding the waste handling.

This thesis has been made on behalf of SCA Skog AB to assess the need of boron in Swedishforest fertilization. Boron has been added to Swedish forest fertilizers since the beginning of the1980s. This makes the fertilizers more expensive and therefore has the necessity of boron inSwedish forest fertilization been raised.The Swedish bedrock generally contains small amounts of boron. The boron in the bedrock istightly bound to the mineral tourmaline and mostly unavailable for plants. This leads to that thecontribution of boron to the soil from weathering is very low besides soils with marinesediments.

Emissions of radionuclides to the atmosphere can lead to wet Deposition on plants in the event of rainfall. An increased level of radioactivity in the plants may occur due to interception and retention of the radionuclides. If the content of the plants is above the threshold limit value, entire yields may have to be destroyed. In order to prevent contamination or decrease the content countermeasures can be taken. The impact of the biomass, leaf area index (LAI) and growth stage of the plant on the interception and retention is important to know in order to decide which countermeasures to use. Weather may also be an important factor. In this work the interception and retention of 134Cs and 85Sr by spring wheat, ley and spring oil-seed rape was studied.

Agricultural land could be polluted by radioactive substances after a fallout. We would then need information about the level of contamination to decide whether the crops could be utilized as food under these circumstances. In an experiment carried out during the 1990ies the retention of 134Cs in potato haulm and the transfer to the tubers were studied. The experiment was carried out during three consecutive years. The plants were cultivated in pots under field conditions and the artificial Deposition was sprayed directly onto the potato haulm at different times during the growing season.

Abstract The accident in 1986 at the nuclear power station in Chernobyl, Ukraine, dispersed radioactive cesium over large areas of Europe. The half life of 137Cs is 30 years and this radionuclide also behaves like potassium, which means that it can easily be taken up by the vegetation or be adsorbed in to the structure of clays, principally illitic clays. When radiocesium decays ionizing radiation is emitted, which is harmful to humans that are exposed, either directly or indirectly through food intake. It is there-fore important to know what happens to the cesium that is dispersed into the environ-ment. In this project a simulation model was constructed to simulate the adsorption and transport of radiocesium in the soil and plant uptake.

SammanfattningDet här projektet behandlar området Additiv Tillverkning (AM) för metalliska material och undersöker om det är lämpligt att använda vid produktion inom flygindustrin. AM är en relativt ny tillverkningsmetod där föremål byggs upp lager för lager direkt ifrån en datormodell. Teknikområdet tillåter i många fall större konstruktionsfriheter som möjliggör tillverkning av mer viktoptimerade och funktionella artiklar. Andra fördelar är materialbesparing och kortare ledtider vilket har ett stort ekonomiskt värde.En omfattande litteraturstudie har gjorts för att utvärdera alla tekniker som finns på marknaden och karakterisera vad som skiljer de olika processerna. Även maskiners prestanda och kvalité på tillverkat material utvärderas, och för varje teknik listas möjligheter och begränsningar.

Sjöfartsektorn är en betydande källa för svavel- och kväveutsläpp. Depositioner av oxiderat svavel, dvs. sulfat, och oxiderat kväve dvs. nitrat, i form av våt och torrDeposition bidrar till försurning och försämrad luftkvalitet. Styrmedel för att minska svavelutsläppen har under de senaste åren bidragit till minskade svavelutsläpp.

SammanfattningDet här projektet behandlar området Additiv Tillverkning (AM) för metalliska material och undersöker om det är lämpligt att använda vid produktion inom flygindustrin. AM är en relativt ny tillverkningsmetod där föremål byggs upp lager för lager direkt ifrån en datormodell. Teknikområdet tillåter i många fall större konstruktionsfriheter som möjliggör tillverkning av mer viktoptimerade och funktionella artiklar. Andra fördelar är materialbesparing och kortare ledtider vilket har ett stort ekonomiskt värde.En omfattande litteraturstudie har gjorts för att utvärdera alla tekniker som finns på marknaden och karakterisera vad som skiljer de olika processerna. Även maskiners prestanda och kvalité på tillverkat material utvärderas, och för varje teknik listas möjligheter och begränsningar.