The retailing industry has an extremely high Density of brands. In order to differentiate its offer, both retailers and suppliers, are constantly forced to come up with new ways to launch their products. A collaborative strategy between two brands is called co-branding, which means that both the private label and the supplier's brand are displayed on the new product packaging. Several studies have shown that a co-branding strategy is successful, but many operators are still reluctant to use co-branding in fear of long-term losses due to potentially damaged business relations. The objective of this study is to explain how the product- and brand related value for customers, retailers and suppliers is affected by co-branding between private labels and national brands.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

There have previously been very few studies of forests on Seram Island in the Eastern Indonesian archipelago and none before on lowland limestone primary forests. The COLUPSIA project on collaborative land use planning has therefore chosen Seram as one of two project sites. The objective of the COLUPSIA project is to establish collaborative and equitable land use planning. In order to achieve its objective the COLUPSIA project aims to improve understanding of traditional resource management and how it interacts with governmental systems, as well as enhancing knowledge about tropical landscapes and ecosystem services.The aim of this study was to contribute to the COLUPSIA project through describing lowland limestone forest on Seram Island in respect to (1) forest structure, (2) tree species richness and (3) tree species composition. We set up 5 plots, each of 0.2 ha, at one site, Mawalai, and collected data on tree variables (tree diameter ?10 cm) as well as for some other life forms and environmental data.

StoraEnso decided in year 2002 to build a pulp mill in the province of Guangxi, southernChina, and also establish eucalyptus plantations to provide it with raw material. By 2010StoraEnso controls about 90 000 of planned 120 000 ha, out of 75 000 ha is already plantedwith Eucalyptus.By using better genetic material, improve the tending, selecting the sites more careful and byusing a proper fertilization regime StoraEnso hopes to increase the mean annual incrementfrom today?s 25 m3/ha, on bark, to 35 m3/ha. This study is one part in this work to increase themean annual increment in the plantation.This master thesis is the forth in a series, that has followed up a fertilization trial that startedin spring 2006 when the trial was laid out and treatments decided. The aim with the trial is toexamine the production potential of Eucalyptus urophylla in Guangxi, southern China.

In the increasing urban environments and the modern societies demands for sustainability there is a challange in planning cities with a balance between Density and a satisfying access of recreational environments. For attractive cities these environments need to be designed to fit every inhabitants? demands and opinions in some way. Increased knowledge and understanding is therefore needed about how different design styles in landscape architecture affect people and the cities. In this bachelor thesis benefits and disadvantages as well as the experience and impact of two fundamental design styles i discussed; naturalistic and formal/abstract design.

Comfort analyses regarding human induced vibrationsIt is not too common among civil engineers in Sweden to perform comfort analyses considering the vibrations caused by human activities. In addition, the Swedish standards lack requirements to be used for comfort analyses in design of floor-systems. The demand for large spans in combination with slender slabs, is today a reason to investigate the floor-system constructions, in order to prevent disturbing vibrations and oscillations.The purpose of this thesis is to create a guide for how a comfort analysis, considering vibrations, should be implemented. Göran Svedenbjörk who is an expert in structural dynamics has been interviewed where he presents his latest project Värtaterminalen and answers some questions about vibrations due to human activities.Floor-systems, consisting of concrete slabs supported by steel or concrete beams, have been investigated with simulations in the finite element program Abaqus. In the simulations, the influence of various factors on the natural frequency of floor-systems and the acceleration level caused by dynamic loads, is studied.

The cadastral index map is a great benefit to the surveying and governments. The map's main purpose is to show how the overall cadastral division looks in Sweden. The lack of quality of the cadastral index map dose not allows property-owners to know where to draw the boundary between their and others' property. In order to know where to find the boundaries between two properties, is it up to the property-owners themselves (self or in company by the other property-owner) to construct various usucaption at the boundaries. The main objective of the study is to verify the existence and extent of usucaption on forest properties in Bodan, a village outside Skellefteå.

Swedish sawmills of today suffer from unsatisfying economy with high costs and low benefits. The economical result depends on how well the sawmill can use their raw material. Iggesund Timber AB, a sawmill in the Holmen group, produces a large amount is enduse orientated products for the woodworking industry. Therefore the aim of this student thesis was to investigate the possibility of automatic enduse orientated quality grading of Scots Pine (Pinus sylvestris) saw logs by using a gamma-ray log scanner. Iggesund Timber AB has the possibility to grade logs automatically with TINA, a two way gamma-ray log scanner. Grading and classification of Scots Pine logs in Sweden today are mainly manual but can in some rare cases be automatic.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical Density.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

For a few decades, the wild boars are established over large areas in southern and centralSweden. Where they cause problems in terms of damage to crops in the agriculturelandscape, where rooting, browsing and trampling, but also damage to the crop when wildboars chosen daily rest in the cultivated fields. Along with the growing number of wildboars the rate of car accident with wild boars has also increased.Here I examined the daily rests of wild boar (Sus scrofa) sows in southern Sweden, todetermine the factors which the wild boars sows choose for daily rest. By determining whatfactors are important in this selection of daily rests, we may be able to make managementmeasures to reduce the damage wild boars make in the agriculture landscape by attractingthem to places where they do less economic damage and accidents on roads.In this study I have examined 123 daily rest positions from 14 different individual wildboar sows fitted with GPS collared in Southern Sweden, Skåne County in Christinehof,Högestad Kronovalls estate. Data was collared over the years 2004-2006 during the periodfrom June 1 to September 30.

Declining union memberships are a fact in both Sweden and Finland. At the same time, the autonomous labour market parties and the high membership rates are the most significant factors for the two countries compared to Europe and the rest of the world. These two factors have in turn been developed and strengthened since the beginning of the twentieth century. By autonomous labour market parties I refer to the fact that the labour market parties themselves through collective bargaining are agreeing on the labour market conditions, without interference from the government.This paper is therefore taking it's stance in the question of what happens with the autonomous labour market parties when the membership rates are in decline. With this in mind, this paper describes the judicial development, the collective agreement and labour market structures, the legal consequences of collective agreements and the opportunities of industrial and sympathy action in both Sweden and Finland. The two countries' systems of labour law have caught some negative attention, hence two of the most discussed cases of recent years are given some attention as well. The collective judicial conditions are very similar in both Sweden and Finland regarding the labour market main actors' collaboration, the collective agreement structures and legal consequences and the opportunities of industrial and sympathy action.

The wild boar was reintroduced to Sweden in the 1970´s from enclosures that they had escaped from and by a government decision in 1988 they were considered a part of the natural fauna again. The purpose with this report is to examine the effects of the wild boars? reintroduction both on their welfare and on other aspects, such as how their population growth affects Sweden. This was done by gathering information from scientific literature and by performing three interviews. Another purpose is to briefly overlook live trapping and other common regulation methods.

When cylinders for motor saws are manufactured there are high demands on the cylinders strength and wearing qualities. Aluminum is a material with low Density and is used by Husqvarna AB for their motor saw cylinders. The aluminum is strengthening with nickel that is attached to the cylinders through electrolysis. When aluminum is in contact with oxygen a film of oxide is formed. To eliminate the oxide and to prevent formation of new oxide zinc is used.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.