This study focuses on a specific organization of a Security Operations Center (SOC) as a case studyto first identify specific challenges related to the work process, preceding with identifying whichprinciples from various process models, such as agile and traditional methodologies from softwaredevelopment companies, can be implemented. Initially, the study presents relevant research on agile and traditional process models as well asresearch on SOC. Subsequently, six semi-structured interviews are planned and conducted withemployees within a specific SOC-type organization to identify the current work process and thechallenges affecting the organization?s work process. The results of this study indicate a description of the current work process in the organization aswell as a variety of challenges related to technical and organizational issues.

Why is the e-revolution of the Swedish film distribution lingering? In attempting to answer that question, this qualitative study depicts the distribution market of Swedish film and its actors. Thirteen interviews with representatives of the industry have been conducted in search of an understanding of the current situation. Two important conclusions are made. One is that the strong interdependency between the actors of film distribution is inhibiting the acting space of those who seek change.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The Swedish consumer electronic industry has recently experienced an increasingly intensive price war. The price war has forced some operators in the business to declare bankruptcy, as the only way to compete has been by driving down prices. A challenge that retail chains in the consumer electronics industry is facing is to increase their margins. If store personnel can success with upselling, the companies will increase their profits. The purpose of this paper is to examine if the sales people in the consumer electronic industry can influence the customer to buy a more expensive product and what the effects the upselling has on the customers' attitudes.

AbstractTitle: To Market a Company with the Help of Nationality ? A study in how marketing and branding works and is being perceived when it focuses on nationalityAuthor: Frida HanssonSubject: Media and Communication Studies CPeriod: Fall semester 2010Length: 38 pagesTutor: Else NygrenAim: Companies and various corporations are always on the hunt for the next big thing in marketing. One idea to market themselves and give them a chance to separate themselves from the cluster of companies aspiring to take your costumers away could be to market themselves with nationality. To investigate why and how some company?s chose to market themselves with nationality, and also study how this kind of marketing is being perceived by customers and non ?costumers.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

The purpose of this masters thesis is to examine the fanzine, a form of amateur publication, in Sweden, both in the traditional paper form and the more recent electronic form. It deals with what is distinctive about the fanzine as a publication and also as a social and cultural product. It also looks upon how the fanzine uses the Internet and the new possibilities it brings. The people behind 18 fanzines, 10 electronic and 8 in paper, have answered a questionnaire about how they produce, publish, distribute and promote their fanzines, what they think about the fanzine as a mode of expression, and how they use the Internet. The masters thesis uses theories within cultural studies as a theoretical approach to the fanzine.

Strömstad is a small city located on the Swedish west coast. Urbanization and development is acurrent issue for the municipally, as for many other in the current situation. The municipal housingcompany Strömstadsbyggen is one of the parties involved in the extensive development that mustbe implemented to meet the changes and developments which the issue holds.One area that is of interest in the discussion is Rådhusberget - this due to the existing infrastructureand unique qualities that the area holds. In order to achieve the best solutions possible for the area,Strömstadsbyggen wishes to listen to what the existing tenants at Rådhusberget thinks and feelsregarding the area and its future potential.This thesis has therefore been carried out in collaboration with Strömstadsbyggen and has beenaimed at identifying the current tenants' thoughts and opinions in the existing area of developmentand infill potential. The aim of this work was also to investigate how the tenants value their homeand local environment in its current state, and what their wishes are for the possible futuredevelopment of Rådhusberget.To achieve analyzable results concerning how the tenants perceive these aspects, an extensivesurvey have been carried out which were sent out to all tenants in the area.

För att tillverkande företag ska kunna fortsätta vara konkurrenskraftiga i tider där tillgången på billig arbetskraft ökar, med ökad konkurrens som följd, är det viktigt att nya strategier utvecklas för att säkerställa långsiktig överlevnad. En strategi för detta är att integrera varor och tjänster som tillsammans skapar bättre erbjudanden med ökat kundvärde. Syftet med arbetet är att få kunskap om ett tillverkande företag har de förutsättningar som krävs för ett erbjudande där vara och tjänst är fullständigt integrerade. Studiens forskningssyfte har varit undersökande samt beskrivande med en deduktiv teorianvändning. En kvalitativ forskningsmetod har använts vid studien, där forskningsstrategin utgjorts av en enskild fallstudie.