The purpose of this study is to examine what characterizes brand identity and positioning regarding festivals on the current Swedish festival market. In relation to our purpose we are also going to analyze how festival attendees relate to a festivals brand identity. Our research question is as follows:What characterizes festivals brand identity and positioning on the current Swedish festival market?This study has been written with a qualitative research method and an inductive approach. Our empirical foundation is built on a rich content based on personal interviews.

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

This report covers a product development project conducted as Bachelor of Science thesis forthe Innovation & design engineer program at Karlstad University.The assignment was supplied by MMB Consulting, Kristinehamn. The purpose of this projectwas to find an alternative way of shaping wire-net insulation mats. This insulation product isused for fire and thermal insulation of technical installations. The insulation consists of stoneor glass wool with a sewn on steel wire netting on the out facing side. This netting has thepurpose to enable fastening to e.g.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

The purpose of this masters thesis is to evaluate bookmobile service as a decentralised library service. I have made a qualitative interview survey, with seven Swedish municipalities participating, all providing bookmobile service in their rural parts. The purpose with the interviews is to examine their bookmobile service. I have also studied articles on bookmobile service, and decentralisation through small library units in library journals, to get an insight into how the work with decentralised library service is done in Swedish municipalities. In this thesis answer is sought to the following questions: - Which decentralised library services are suitable for inhabitants and institutions in sparsely populated areas, considering factors such as number of inhabitants, proportion of old people and children, demographic changes, economy, possibilities to cooperate with other municipalities? - What is the current bookmobile service situation in Sweden, taking seven municipalities in the region of Småland as a starting point? My conclusions are that each municipality must decide which decentralised library services that best suites their needs.

Almost every day newspapers cover companies and brands in crisis. This should worry companies as negative publicity has been shown to have a great influence on consumer perceptions on brands. In addition, brand crises have been shown to be contagious, meaning that they also affect consumers? views on other similar brands. This study aims to investigate spill-over effects of one brand crisis to another within a product category.

The thesis concerns itself with studying the effects private brands has on the consumer?s impulse buying in the grocery industry, as in degree of unplanned spending and the selection process between manufacturer brands and private brands when such a purchase is performed. The study?s methodology is characterised by a qualitative approach, whereby the study acknowledges the inductive approach towards the empirical setting even though the Mehrabian-Russell model along with motivational theories serve as highlighters of relevant aspects in the empirical field. The study concludes that both the utilitarian and the hedonic consumer decide what to buy before entering the store, whereby a low degree of needs arise in the store.

Product development cycles become shorter and shorter. The time from idea to market has become an important competitive factor. Despite this, methods used for making the product development process faster are surrounded with uncertainty about their efficiency. The purpose of the thesis is to describe the pros and cons of ?best practice? methods for shortening lead times and how these methods effect the lead times in research and development.

This study aims to investigate how consumers perceive variety in grocery stores and further how private brands have affected consumers? perceptions of variety in grocery stores.The study focuses on the perceptions and attitudes towards variety and the impact of private brands on perceived variety. Hence, a qualitative rather than quantitative study has been used. Photo elicitation has been used in both focus groups and in-depth interviews, which have been the empirical data collection of the study. Scientific articles and books have also been used in the process.

The aim of the study is to investigate how a teacher uses multimodal resources with an interactive whiteboard while teaching reading and writing. The aim is also to investigate what view the teacher has on using an interactive whiteboard while teaching reading and writing. Video-recorded observations and audio-recorded interviews are the methods used to collect data. The analysis was performed from a multimodal perspective and is also inspired by interaction analysis. The result of the analysis showed that the teacher uses several multimodal sign systems in combination with those found on the interactive whiteboard.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

Academic research concerning how to determine the power situation in a supply chain where an investment product supplier is involved did not exist. Therefore new models has been developed that analyses the power relations and maps out the power situation in a supply chain. In the future these models can be applied on similar cases by modifying the included parameters. The new models show that case company FAS should focus on the big producers of garbage bag which are Trioplast, Rullpack and Miljösäck. By strengthen the brand FAS can make more money in these relations.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.