This report will present athesis on behalf of Eleiko Sports AB and carried out by two students at the InnovationEngineering (University of Halmstad). In this report the project participants willdescribe the project background along with the current product issues andneeds. A clear structure for participants, stakeholders and information flowbetween these parts will be included in this report so that you can clearly seethe areas of responsibility. The report includes a timetable which the grouphas worked along and also methods used. In the development process you will beable to read about how the students in an interdisciplinary way have used themethods and come up with an entirely new product.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

The purpose of this study is to incrementally, through a combination of various methods, examine the assumptions about the working economic outcomes that can be made based on planned ergonomic intervention in a department at Pfizer Health AB in Strängnäs. The study contributes to knowledge about how assumptions on OSH financial results can be made, based on planned ergonomic interventions. These assumptions were based on biomechanical calculations made on the basis of ergonomics measurements with inclinometer. The study is important because previous research has shown that poor work environment have a bad impact on the economy of a company in different ways. It can for example be negative impact on the company's productivity and quality of the units produced or the services provided.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

There is limited research done in the area of management control in the relationship between companies. This study investigates management control in outsourcing relationships and the decision to change sourcing strategy and to insource functions. The empirical research was conducted at an international company, which in this study has been anonymized. The research is mainly based on interviews. To extend and verify the conclusions drawn, another company, AB Ph.

Companies use different forms of representation to promote business negotiations. The regulations for the right to deduction for the cost of representation are stated in Chapter 16 section 2 of the Swedish Income Tax Act (IL). According to the law there must be an im-mediate connection between the expenditure and the business practice and the claimed de-duction must be reasonable. The Swedish tax authority publishes general recommendations regarding representation which are used as guidelines for the tax payer to follow. The gen-eral provision about tax deduction can be found in Chapter 16 section 1 of the Swedish In-come Tax Act (IL), stating that expenses to acquire or retain income shall be deductible.

Detta examensarbete har gjorts på uppdrag av Rottne Industri AB och berör matarhjulens dubbinträngning i virket. Matarhjulen sitter monterade i skördaraggregatet i skördaren, en skogsmaskin som används vid skogsavverkning. Då inträngningen, som uppstår av dubbarna på matarhjulen, är för stor (>5mm) bildas skador på virket vilket är ett utbrett problem inom skogsmaskinindustrin. Studien kartlägger de vanligaste dubbmönstrens skadeåverkan under kontrollerade och vetenskapliga förhållanden där testerna är designade för att efterlikna verklig skogsavverkning.I studien utförs två tester. Det första visar sambandet mellan presskraft och inskjutningsmått för respektive dubbmönster.

The purpose of this essay was to try to find out if the optimal farrowing pen exists. By interviewing producers, veterinarians and salesmen and also through a literature study, I have tried to evaluate advantages and disadvantages regarding different types of pen formations and environmental details. The interviews with the producers showed that they all were satisfied with their particular farrowing pen. It also showed that one material can be functional in one farrowing pen but not in another. The determining factor for the outcome of the farrowing pen was the individual experience and the way of thinking of the producers. The veterinarians were of the opinion that there today were no existing farrowing pens that responded to the pigs needs. However, the results on the farms were generally good. The salesmen thought that the production costs could be lower if a sort of a standard pen was used.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

The objectives of this research were to determine whether the natural rattan resources in Sulawesi, Indonesia can cope with the strongly increased harvesting pressure that has occurred over the last centuries. I was furthermore looking for patterns in the rattan population dynamics that might give a hint on how the harvesting system could be improved to ensure a maximum sustainable yield. To answer these questions, I developed an individual-based model to analyse the dynamics of rattan growth in connection with rattan harvests by locals to identify sustainable levels of rattan harvests around villages in Sulawesi, Indonesia. Scenarios with different harvesting intensities were run to compare the change in harvest amount. For a given harvesting pressure, scenarios with a high number of harvesters and a low harvesting frequency had the same effect as scenarios with high harvesting frequencies and a low number of harvesters.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.

Large amounts of birch-timber are imported to Sweden, from particularly the Baltic States, since the domestic production can?t support the pulp industry. The goal of this study was to show the potential of birch and the area?s most suitable for birch production. The study was limited to Gävleborg County. Using site characteristics, site index (SI) for birch was estimated on all National Forest Inventory plots in Gävleborg County.

Many studies have been conducted of different types of business networks in recent years. Despite this, there is a lack of research concerning industry-transcending formal networks which are limited to a specific region. We have conducted a case study of Örebro Promotion, which is an industry-transcending network including over 500 members. Örebro is a medium-sized city in the middle of Sweden. The purpose with our study is to create an understanding of why enterprises choose to be a part of the network and what they feel is the gain of their membership.