The thesis aims to investigate the farmer?s perception of currency hedging and interest rate bonds and to investigate the farm size of companies categorized by number of acres, has no effect on this. The work also aims to gain an insight into what active farmers consider to be important what to consider when they choosing a bank and a personal banker. The work is based on the survey and has been supplemented by a literature review on the subject. For the survey were selected out randomly 50 farmers with Agriculture and Rural Management education. The requirement of the farmers was that they should be farmers by profession, and also made sure that the farmers of various sizes came with. We got a total of 32 responses within the set response time we said, which was better response than we expected. When the final result came we ranged the farms in a size range. We found out that all farmers in the study diligently follow the market and are easy to assimilate new ideas, providing opportunities to profitability of their business with the different instruments that are available on both the financial level and farm level. The investigation revealed that the major in favor of having a personal banker. They think it´s good to have a special plug to turn to who has knowledge and experience of how the agriculture sector operates.

In this thesis a concept for floor hatches for foam pits has been developed. Since there is an existing solution that is powered by hydraulics and is expensive, the goal was to develop a cheaper solution, as simple as possible.A number of different concepts were developed and evaluated. A concept with five sections that are pulled to the side and stacked on each other was chosen as it was thought to have the lowest risk of crush injuries and to be easiest to manage and control. In the opening behind the foam mattress a lifting table is placed to regulate the height of the stacked sections.To be allowed to be installed in the floor of sports halls the sections must be dimensioned according to the construction standards for these types of buildings. Different dimensions of beams in steel and wood materials were evaluated and of those, who lived up to the requirements of the standard, a concept was chosen.

Nowadays, cooperation is necessary and this study tries to illuminate the possibilities and problems about cooperation in fiction between 7 small/midsize farms in Skåne. Conventional Farming is done with grain and sugarbeets as specialization. Calculation of machine costs have been done and compared in the study, both for the farms in thorough and the fictitious operation companies. Business ratios as depreciation/ha, interest/ha and maintenance/ha have been calculated. In this essay we present a proposal about how a practical implementation can be done. In the proposal there is an example how the distribution of work can be done.

This bachelor thesis summarises the history of ?Jämtgården? based on literature research andempirical documentation. Jämtgården is a typical 1800th century duplex timber buildingoriginating from the province of Jämtland. However, it was moved to Västernorrlandslänsmuseum in Härnösand in the year of 1918. During the 1920's the museum decided tofocus on the region of Västernorrland and therefore Jämtgården was somewhat left behind.The building's interior walls are decorated with distemper paintings but the current conditionis poor.The aim of this thesis is primarily to compile knowledge about the building and its interiordecorations as well as finding out whether primary distemper paintings, from the periodbefore the relocation, remain on the walls.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

The main aim of this study was to investigate and compare different methods for the extraction of forest fuel from environments close to an archipelago. The study was based on relevant literature and published reports as well as personal communications. Forestry has traditionally been characterized by intense efforts to rationalize and mechanize the cutting technique used for timber and pulpwood. In line with the increasing importance of forestry, more concentrated efforts can be expected in the area of techniques and methods, especially for the above-mentioned product lines. In Sweden, forestry is of major importance and the Swedish economy and standard of living have mainly been created based on the revenues generated from it. Thus, it is vital that Swedish forests are harvested in an efficient and responsible manner. The demand for biofuel is growing and today accounts for 15% of total Swedish energy production, a share that will probably increase. This study is based on three research questions, which are described under the heading of Aim. The results reveal that the most profitable method for handling forest fuel is the traditional one, which is also the most commonly used method in southern Sweden, namely the stockpiling of logs in a clearing by means of forwarders followed by splintering at the place from where they will be distributed. Today, the high cost of barge transport required for the extraction of forest fuel in an archipelago environment renders such operations unprofitable.

Course: Degree project in logistics, 4FE05E, spring 2013Author: Maria WennbergSupervisor: Petra AnderssonExaminer: Helena ForslundTitle: Standardization and improvement of the outbound process execution Background: Transportation represents a critical part of companies? logistics. Special management and control is needed when using a third party logistics. Balco uses a third party logistics for their deliveries of balcony parts and before it takes place the outbound process is executed. Currently, Balco experience difficulties with the process? many ways to be performed by the project managers and logistics department.

Det råder hård konkurrens på marknaden för sågade trävaror. Längdkrav på furuprodukter var tidigare sällsynt men blir allt vanligare. Idag efterfrågas längre och längre längder, helst ska sågade trävaror vara över 42 dm (vilket motsvaras av timmerlängder över 43 dm). Iggesunds sågverk ställer sig frågan om det finns möjligheter till en bättre längdanpassning av sågverkets timmerlängder till marknadens krav, och om en sådan förändring skulle löna sig? Detta arbete tittar på tre scenarier till förändrade timmerlängder och hur de påverkar Iggesunds sågverks lönsamhet.

Svartedalens nature reserve a social richness worth develop. The nature reserve of Svartedalen is an area of high biological and social values. The reserve is located close to several densely populated areas. The reserve has been classified as a national area of interest for nature conservation and outdoor life, and as a Natura 2000 area according to both the bird- and habitat directions. The reserve is the largest landarea in Västra Götaland, 3 410 hectares, where a resolution has been made about all these forms of protection. The foundation Skogssällskapet owns 1 956 hectares of the reserve, at 1 384 hectares of the property they pursue FSC-certified silver culture, according to current management plan.

Diesel electric propulsion is in many ways a good alternative to conventional shaft propulsion, both economically and environmentally. There are also many other good side effects which need to be considered, i.e. better manoeuvrability, more efficient use of space and less noise on board. However, there are applications where diesel electric propulsion is not profitable. Large ocean going ships? profitability is much depending on fuel costs and the diesel electric alternative cannot compete on long journeys with large low speed engines.This thesis will treat the aspects of choosing between a diesel electric system and a classic mechanical propulsion system.

This thesis studies the way valuation of investment properties is conducted in accordance with IAS 40 and how reliable these valuations are. This has been conducted by studying ten Swedish real estate companies listed on the NASDAQ OMX, during the period 2005-2008. The study shows that all companies use valuation models to determine the fair value of investment properties. Two different types of models have been identified. Companies that use the cash flow model show inconsistencies in time horizon, and how they determine the horizon value.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The need for snow-free surfaces at squares, bus stops, platforms, car parks and sports facilities increases and at the same time energy price rise and the environment is becoming a hotter issue. The construction of the ground heating systems often lack thermal insulation under the heating pipes, which means that the heat from the pipes not only warm up the soil surface but also heats the surrounding soil. The insulation also has more features, by insulating the risk of frost damage is minimized. The goal of this report is to demonstrate the large heat loss and energy costs in the absence of insulation under the heating system.The report begins with a scientific way to study and treating the soil heating system uses, and the theory involved. Furthermore it also deals with different routing principles of heat pipes depending on the facility.All calculations are made with so called finite element method (FEM), in COMSOL Multiphysics 3,5a, where models are created with different conditions.

As the companies of today are good at protecting themselves against external threats, but are having problems with internal threats, we focused on how information can be protected from ending up in the wrong hands. First and foremost to protect information from employees who might steal it and sell it to another company. Since the security investments needed are connected to the financial costs of implementing them we have tried to create a balance between the investments needed and the cost of implementing them. The different kinds of protection needed are first and foremost protection to make data less accessable, passwords and traceability. While it is hard for us to estimate the amount of money a company lose by the hour when the production stands still, we have not been able to use any of the excising models to calculate the profit of installing countermeasures.