Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

With the elevated oil prices of today it is necessary to look for other heating alternatives. If the oil price continues to develop in the same way it has done the last years it will soon be impossible for many producing garden companies to survive. The purpose of this diploma work is to compare three different fuel options in order to find the most economic one considering the conditions of Katrinebergs Handelsträdgård AB. In relation to oil it is profitable to change to any of the three alternatives: wood chips, wood pellets and grain. The most profitable option is to change to wood chips. This alternative has a payoff time less than three years and after that the annual saving compared to the oil is relatively high. The annual cost is 65 % of the cost of the oil alternative.

Since 1996 the Swedish households have ten folded their volume of loans for own homes that is attached to a floating interest rate. Also in 1996 the Swedish electric market was deregulated. These two facts have increased the volatility in the household expenses for these two commodities. This thesis studies the risk for homeowners attached to the exposure against the electric and the credit market. The risk model used is Cost-at-Risk which is usually used by public authorities for analysing the risk involved with national debt.

As IT service departments in organisations are becoming more complex and customised, the indirect costs are increasing in relation to the total costs. The difficulty of fully estimating and identifying the spread of the cost in the IT service department is increasing. As a result, firms tend to budget the business unit as a total cost rather than as a spread of defined costs. In order to deal with this challenge an ABC calculation will be applied. The Time Driven ABC model will be conducted in OMX´s Servicedesk unit within the IT services.

Syftet med studien var att undersöka huruvida utsattheten för ?sunk cost-effect? och förankringseffekten ökade vid intuitivt processande jämfört med analytiskt processande. Deltagarna i studien var 78 studedenter vid psykologiska institutionen vid Göteborgs Universitet. Datainsamlingen gjordes genom en pappersenkät. En 2 × 2 - vägs ANOVA avseende bias och process gjordes för både ?sunk cost effect? och förankringseffekten i en mellanindividdesign.

Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.

Sweden?s District councils and Country councils are in itself to a large extent responsible for the state financed welfare. Because of this, Sweden has a contribution- and adjustment system. The reason for this system is to create equal chance, for all District councils and Country councils, to be able to give the citizens service independently of their income and non-influential structural differences. The adjustment is built upon the so-called standard cost method, which contains four different parts.

The objective of this thesis was to develop a method for the planning of road upgrading at Holmen Skog, a Swedish forest company. A critical issue for creating such plans is to identify roads that are suitable to upgrade to a standard that can handle heavy traffic during spring thaw, since spring thaw is a bottle neck for transporting timber. The method was tested in a case study at a district. The work consisted of two parts. The first was to retrieve and prepare geographical data for the roads.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine setups they required during the production process.

According to TCO (The Swedish Confederation for Professional Employees) the worst threat to the Swedish welfare is that so many people because of bad health and unemployment are not a part of the labour force. If Sweden could make the number of people with health and unemployment problems half the size as today, the GDP would increase with more than five percent. In real money this means 110 billion Swedish kronor a year. According to SCB (Statistics Sweden) the difference between women?s and men?s absence owing to illness should be investigated more closely in order to get at better understanding of the problem.

Since some years Linköping has invested in biogas production, mainly from offal's, residuals from food industry and manure. The municipality goes for biogas in the local traffic and in all transportation. It is also possible for private car owners to run their cars on biogas. The purpose of this essay is to perform a Cost-benefit analysis and examine if the project has been beneficial from a social point of view. The effects have been identified, measured and monetarily valued. The essay is limited to include the year of 2006 only.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

When a person arrives at the emergency ward at the Uppsala University Hospital with his or her symptoms he or she explains the problems and then a priority process starts. The staff evaluate at which emergency level the patient is located in a model called Triage. The Triage model helps to decide the priority need and is based upon templates which point out in which of the 5 categories a patient is to be placed, to eliminate any future risk regarding his or her health. A lower triage level means lower priority but implies better health when the evaluation takes place. To obtain optimal effect of the Triage model the evaluation of symptoms must be reproducible so that patients with the same symptoms are placed at the same triage level regardless of whom among the staff conducts the evaluation. The purpose of the study was to see if the resources are allocated based on priority level of the patients.

The lack of fresh and clean water today causes severe problems, mostly in developing countries. Waterborne diseases like typhoid, cholera, amoebic dysentery and diarrhea create health problems and deaths among people. There is a need for low cost interventions like household-based water treatment and safe storage (HWTS). Solvatten AB is a Swedish company based in Stockholm. Their product, Solvatten, is a household water treatment unit that can treat water containing viruses, parasites and bacteria.