The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

This paper investigates and explains the existence of different governance structures in the Swedish film industry. Using a theoretical framework of transaction cost economics, it is shown that trust follows from frequent production projects, affecting the distributors? control of producers, cinemas, video retailers and television. Control becomes more flexible, informal and less time consuming. Furthermore, the control of the distributors? relationship with television and cinemas proves to be multidimensional and affected by transaction activities, as well as by demands from previous parties in the value chain.

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

The cost of construction projects have increased during the past few years. Different actors in the construction industry work together to advocate various measures to mitigate these cost increases. One of these measures is to try to improve the efficiency in the phase of production. By striving for a kind of standardization with a constant quest for improvement, the productivity can increase while the costs of production fall.For this thesis has a case study been conducted at the construction company JM AB which is seeking this. They call the approach structured production and have implemented various measures to achieve a more productive output.Based on information from reconciliations, the cost and the spent hours of craftsmen have been analyzed at the company where the case study took place.

The cost of capital for traded companies is basically assessed on information from thefinancial market. Small and non-traded companies are lack of this necessary financialmarket information in order to determine an appropriate equity risk premium and tocompute the cost of capital.In the absence of financial information necessary for an external investor, it is difficult toevaluate a non-traded company with the Capital Asset Pricing model (CAPM), which isbased on the financial market information. It measures only the systematic risk, which isthe contribution of one share to the market risk of a portfolio. It is therefore important tofind models that reflect the small and non-traded companies? real business value and theirunique characteristics.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

Sweden has long had access to low electricity prices due to the wide availability of hydro and nuclear power. This has now changed because of today's rising electricity rates resulting in increasing heating costs for properties, especially in the properties with electric heating systems."Ankaret" is a parish for "Svenska Alliansmissionen", which is located at "Gullbrannagården".The parish has installed electrical radiators and an exhaust ventilation system that makes the energy demand high due to the large ventilation flows. The building was built as the price of electricity was still low and would reduce energy use today by combining its heating system with an air/air heat pump. The heat pump delivers more heat into the room than the electrical energy that it uses. This lowers the electricity needs.

Producing a building is a long and complex process. It consists of several parts, from the feasibility study and design stage onto the construction and finally the management of the building. The design process is a critical part of the process where construction plans are made. The quality of the plans affect the production phase in great extent and faulty plans can pose a risk for extra costs for all parts in the process. The cost of producing dwellings has increased the last years and the detail design process is one of many phases where improvements can mean Cost savings within the whole building process.This report aims to point at parts within the detail design process which could be more efficient, regarding communication, follow-up and time planning, and to give suggestions for improvements.

This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

När en kommersiell hamn byggs ut fordras omfattande muddringsarbete för att säkerställa ett brukligt djup för sjöfart. Då stora delar av muddermassorna ofta är förorenade av tungmetaller och miljögifter krävs särskilt omhändertagande av dessa. Traditionella omhändertagningsalternativ består av att deponera massorna på särskild avsedd plats på land eller tippa till havs, något som inte tillåts för förorenade sediment. En relativt ny metod är stabilisering/solidifiering (S/S) som innebär att muddermassorna behandlas med ett bindemedel för att sedan kunna användas som fyllnadsmaterial i exempelvis kajkonstruktioner. Dessa alternativ behöver noga vägas mot varandra med hänsyn till ekonomiska och miljömässiga aspekter.

BackgroundA cost that lately has been discussed related to audit is the higher cost for auditing of small stock company. The question is if this cost is higher than the total utility of statutory audit and should it in that case be statutory. SRF says that the condition for small stock companies development is an abolishment of statutory audit. FAR consider that auditing is important for development and continuation.PurposeThe purpose of this paper is to investigate whether there are any winners or losers among auditing firms and accounting firms in Sweden if the statutory audit for small stock companies abolish.MethodThe paper is both a qualitative and a quantitative study that is based on primary data made from an interview and a questionnaire investigation. ConclusionOur conclusion is that the big Winner is the accounting trade.

The purpose of the study is to investigate and elucidate how low-cost airlines can influence and develop tourism in a region. In order to bring about the purpose the author used two research questions. Have low-cost airlines contributed to regional development? How many additional visitors have low-cost airlines contributed to Stockholm? In order to answer these questions a survey was carried out at Arlanda airport and statistics were collected. The results of the study show that there has been a regional development.

Today's unsustainable resource use is influenced by many factors. One key factor isproduction methods and patterns. Trough change of production patterns enterprises can bepart of the solution to a more sustainable society. This case study has analyzed environmentalperformance of the printer company Edita Västra Aros Ltd (EVA), who has gained awards forits environmental work, and what driving forces they have had during this work. The survey isbased on a qualitative method and the collected data consists of documents and staffinterviews, which have been analyzed with content analysis.

The technology used in the development of web-applications is evolving at such rate that it has become more and more important to keep web-applications modern. If an application is based on a technical platform that is not renewed, the platform may over time develop into an obstacle in further development of the application. There may be compatibility issues and some of the code may be unnecessary due to abstraction, and therefore more time consuming to work with. Sometimes the reason may be that an application has been built to run, and is running on an application server that is no longer being maintained. The system can be large and modernization can cost a lot.