Investment costs for eight different type housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

Banking systems in India is quite popular and it needs some more changes to reach all the customers. Lack of the service is main problem in Indian baking system. If the common person wants to open the account, it take?s little bit high cost and banks are not near the people location. Due to the Lack of service, people do not want to be a customer of the bank.

The margin in crop production is more and more less and it forces the producer to check out how to reduce the cost of establishment of new crop. One way to reduce the cost in establishment is to begin with plough less farming. It saves money and time compares to conventional soil preparation with plough and harrow. Not all soil types are god for plough less farming and should be continued with ploughing (mainly light soil), but other soil types working very well with plough free farming. If you want to success with plough less farming you have to think in new lanes. One of the things you have to think about is to not grow too much cereal after cereal. Low stubble is important when you harvest the crop and also to spread and chop the straw well. I have in this work interviewed some farmers and farm advisers in Östergötland to see which thoughts they have about plough less farming.

AbstractA systematic replication study was conducted at the training site at the University of Karlstad. Student therapists performed cognitive-behavioural therapy (CBT) as a part of their master?s degree in psychology.  The systematic replication that took place was based on the work of Hiltunen et al. (2013), who evaluated the efficacy of CBT treatment conducted at the training site previously mentioned.

On November 1st 2010 the obligatory audit was removed in Sweden for small companies. What factors influence such companies to have their financial reports audited, and what factors exert the strongest influence. Purpose: The authors would like to investigate factors that affect companies with voluntary audits in Skåne län to continue with the audit. The authors also wish to examine the factors that have the strongest impact on the choice to adopt auditing. Method: A quantitative study has been conducted in which aquestionnaire was sent to companies in Skåne Län Conclusion: The factors that affect smaller companies to continue with audit are as follows: Accounting quality, cost, creditors (loans), suppliers / customers, the tax office and distort competition.

Unit testing is a type of testing technique which is becoming quite fashionable to the developers and companies that are in the business of creating and managing software. Alas there are seldom any concrete data to support the positive claims of the authors in unit testing methodology books. These claims are instead based on empirical studies and the experience of the authors. The problem that arises from this situation is that it becomes problematic for managers and also the developers themselves to convince both customers and their own management to use this type of testing as there is no exact return of investment model. This essay examines this problem from two points, the first point is from the literature itself and interviews conducted with a number of developers at a software company located in Umea, Sweden.

This is an investigation of a mobile prefabrication factory´s competitiveness and profitability which also will result in a suggestion for a design of the factory. The mobile prefabrication factory is an idea of a new concept for production which is meant to be used in the manufacture of slab. The main intention with this concept is that by using a fast established prefabrication factory to produce elements near the construction site, thus avoiding transport from the factory to the building site. This means not only an environmental and economic gain, but also that you can avoid risking damage the elements which often occur during transportation. The contractor is owner of the mobile prefabrication factory and can thus avoid long waiting times and cyclicality.

This diploma work has been carried out in collaboration with the building contractor Sh Bygg Fastighetsutveckling AB in Uppsala with the intention to investigate how the height of a building affects various energy aspects such as transmission losses, infiltration, and the specific energy usage. Three different reference objects have been studied. The reference objects have been simulated for four different heights in the calculation program VIP-Energy.The results show that an increase in floor number can lead to both advantages and disadvantages. As the number of floors increases, transmission losses per square meter floor area decreases. However, as the height of the building increases, the reduction rate decreases.

The purpose of this study is to get the cadastral procedure for condominiums to become more affordable. The aims of the study is to examine how the number of condominiums, the number of joint facilities and the number of joint property units that are formed in a condominium cadastral procedure in Sweden influences the cadastral procedure cost. To get an overall perspective the study also explores how the chosen forms of co-operation have worked out in association management.A condominium is a type of three-dimensional property unit, which may only contain one residence.  This form of property formation has been allowed in Sweden since 1 May 2009.  At the end of 2014 less than 1000 condominiums had been formed despite the legislator?s expectations for 3000-5000 condominiums a year. The property unit can have access to necessary facilities, not available within the property boundaries, by establishing joint facilities or form joint property units.

Denna uppsats utreder samspelet mellan politisk kultur och politisk ekonomi i Jordaniens politiska liberaliseringsprocess genom en litteraturstudie förankrad i kulturspecifik forskning. Det teoretiska huvudsyftet är att pröva Michael Ross teori om förhållandet mellan beskattning relativt offentlig service och politisk liberalisering, på en djupare nivå. Högre beskattning relativt offentlig service antas ge representation, politisk liberalisering och demokratisering. Vi kartlägger vilka kringliggande faktorer denna ekonomiska cost-benefit-modell fungerar tillsammans med.Vår slutsats är att den ekonomiska cost-benefit-modellen samspelar med en kulturell cost-benefit-modell. I Jordanien tillfredställde inte regimen befolkningens krav på subvention av exempelvis bränsle och basmatvaror.

I den här uppsatsen undersöks och utvärderas metoder för att beräkna indirekta socioekonomiska effekter till följd av transportinvesteringar. De projekt som ligger till grund för denna jämförelse finns på gemensam europeisk samt på nationell nivå. Projekten har använt sig antingen av kvantitativ analys, i form av multikriterieanalys alternativt cost-benefit analys, eller av kvalitativ analys, för att utvärdera effekterna. Slutsatserna består i att det är svårt att beräkna dessa effekter och att det därför är viktigt att metoden speglar den underliggande informationen. En verbal metod som speglar osäkerheten är ofta att föredra framför en metod som presenterar exakta monetära mått trots att den underliggande informationen är osäker..

As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

A large cost at the construction sites today is the labour cost of the workers. But unfortunately the worker potential is not used to full. It is not unusual to take into a count with a work-­?place-­?additional-­?time of 50% in some cases. By increasing the workers' motivation and responsibility for their tasks may reduce the time considerably, which also increases the potential for greater gains in construction projects.By using the situational leadership may the workers level of maturity develop entirely.

Fuel wood is currently the third largest assortment from the forest in Sweden after pulpwood and lumber. Branches and tops i.e. logging residues are one of the assortments of fuel wood which is a common by-product after harvesting nowadays. The way to utilize, disintegrate and transport the logging residues varies between northern and southern Sweden. Branches and tops are collected throughout the year at appropriate stands, but are consumed mainly wintertime.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.