The purpose of this study was to determine if and how the city district of Södra Innerstaden in Malmö, by using the Skärholms model, demand their client to reciprocate. The first problem set was to see how the demand was shown in the social service act from year 1998. From there the motives behind the introduction of the Skärholms model in city district of Södra Innerstaden were researched and also if there were a demand on reciprocity in city district of Södra Innerstaden public administration. The study was conducted in an exploratory way. The method used was to describe the idea behind Skärholms model after examining documents from the public administration.

The purpose of our study is to interpret and understand the collaborative process around a regional model that is based on state developed guidelines for people with dementia. We have chosen to focus on the importance of interaction and have therefore interviewed participants in the project's steering committee. This group participates in efforts to develop a model for dementia care in Halland.The project work in Halland, to develop a joint model for people with dementia and their families was initiated in the spring of 2011 and is due to finish at the end of 2012. The Halland model has been named ?Annas led? and is about Anna and her husband Lars and living with dementia.

In recent years the liberal representative democracy has been subject of a substantial critique because of its inability to accommodate difference and createa genuinely democratic political process. One such critique comes from the theory of deliberative democracy. Supporters of deliberative democracy try to promote a model of democracy that take its vantage point in free and equal deliberationbetween all relevant actors in a political community. This model has with some success opposed the aggregative model of democracy, and in important ways turned the attention to the potential of deliberative processes.However, the deliberative model is still somewhat underdeveloped when it comes to issues of diversity and difference. This essay deals with such deficiencies by analysing deliberative democracy in the light of the critiquelaunched by difference- and radical democrats.

This thesis explores the position of book blogs in the literary system through Robert Escarpit's socio-literary model of the book market. Simultaneously the thesis serves as a test for Escarpit's theory: by actively applying his theory and model to a very new and contemporary actor on the book market I hoped to reach or confirm new insights into the usefulness and validity of Escarpit's work for contemporary socio-literary studies.Three book blogs were selected for the analysis and interviews were carried out with the authors. The interview questions were formulated specifically for the purpose of extracting the kind of information necessary for an analysis using Escarpit?s theory. As a complement to the interviews, statistics on the type of books reviewed on the blogs were also compiled.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

This Master thesis was written for Lantmännen Agroetanol in Norrköping concerning the layout of their finished goods inventory and unloading of feed after introducing a new product mix. Lantmännen Agroetanol has two production lines which produces feed. Both lines lead to six silos, used as inventory of finished goods. The feed from the two production lines differ in terms of quality, where as Lantmännen Agroetanol wants to separate their finished inventory in order to charge a higher price, by selling the better product as a premium. With two different feed products the yearly revenue is expected to increase which motivates a research about the current capabilities and necessary changes to be made in the factory.

Heat is distributed to the district heating customers through pipes with water as a heat carrier. The district heating system is complex. To decide what is leakages from the district heating net versus what is the water consumption of the plant, is difficult. Therefore, the purpose of this master thesis is to establish a model where the district heating net?s leakages but also the water consumption of the plant can be followed daily. The project is performed at Vattenfall´s district heating power plant in Uppsala. Information is gathered through discussions, drawings of the plant and guided tours of the plant.

The purpose of this essay is to try to understand the relationship between the structures of modern working life and the development of burnout. By using the method of qualitative interviews we wanted to see if the Effort-Reward Imbalance Model could be applied to the data we had collected. Two questions have been highlighted in our research:        ? Is it possible to establish a relationship between the structures of modern working life and the development of burnout among the subjects interviewed?  ? Is it possible to explain the development of burnout among our interviewed subjects through the Effort-Reward Imbalance Model?    Our theoretical frames are the general theories of the modern society and the modern working life as developed by Anthony Giddens, Ulrich Beck and Zygmunt Bauman. We have also used Johannes Siegrist?s medical-sociological Effort-Reward Imbalance Model (ERI-Model).

Ocean Thermal Energy Conversion (OTEC) is a technology that utilizes the temperaturedifference in oceans between the warm surface water and the cold water at 1000 m depthto produce electricity. The purpose of this report is to investigate if OTEC with its synergiescould become a commercially feasible energy solution for a small island. A literature reviewis conducted to explore the different OTEC technologies and to what extent the threesynergies; fresh water, air conditioning and aquaculture, could be used. In order to calculatethe profitability of these synergies there is also a study conducted on the conventionalmethods and cost of fresh water production, aquaculture and air conditioning. A model is setup using a scenario of a small tropical Island with population of 100 000 people.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

The purpose of this report is to create and develop a model that streamlines and helps the innovationprocess of an idea owner and also in the development of ideas.This model should be able to apply for workshops and in innovation advice or business devlopment. I used the qualitative method in my essay just to get a maximum clear data collection, where the seven respondents were included in the interviews. However, much of the information retrieved from the theory books and research/science articles, in order to answer the research/Sceince question in the best possible way.

This final project is an investigation about the responsibility in rooms where the walls and floors are exposed or partly exposed to irrigation of water, as a bathroom, laundry room and WC. The cost for all water damage is valued for 5 000 000 000 SEK each year. How is this possible with all information about the problem and good materials? Who is responsible? Incites had been made in the subject throw reading reports and participation in courses about how to make a room mention above. Discussions have been made with workers in the trade of making the walls waterproof.The conclusion in the rapport is about who´s responsible for the damages and will pay the cost of the renovation. The responsibility is discussed between the contractor and the insurance company.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

With this master thesis we wanted to find out in which way the concept of public service is connected to different perspectives, ideals, visions of the future and forms of organizations. The purpose with our thesis was to do an analysis of different concepts regarding to public service. To the analysis of concepts we used Swedish newspapers and analysed the issue of public service that had been discussed in articles written during the last five years. From this material and other papers about public service we developed a model of public service ideals. We wanted to find out what the different perspectives thought about the Swedish television and their commission.

A distributed hydrological rainfall-runoff model has been developed using a GIS integrated with a dynamic programming module (PCRaster). The model has been developed within the framework of the EU-project TWINBAS at IVL Swedish Environmental Research Institute, and is intended for use in WATSHMAN ? a tool for watershed management developed at IVL. The model simulates runoff from a catchment based on daily mean values of temperature and precipitation. The GIS input data consist of maps with soil type, land-use, lakes, rivers and a digital elevation model.