Sök:

Sökresultat:

1703 Uppsatser om Cost Constraint - Sida 47 av 114

Styrmedel för att hantera kreditrisk: En fallstudie av Handelsbanken Sergel

The Swedish bank Handelsbanken has, according to their own way of measuring, been more successful than a weighted average of their competitors during the last 38 years. They have also handled the recent financial crisis, as well as the one in the 1990´s, better than most other banks. This paper studies their management control system at branch level in order to identify the controls which have been enforced to ensure that a low risk level is retained in the lending. The controls that have been identified are; (1) A decentralized organization with the offices as profit centers where the manager has restrictions regarding risk level and the results are measured as K/I (cost/revenue). (2) The absence of bonuses and individual follow-up regarding performance measurement.

Produktivitet vid stubblyftning :

Stump wood was used between 1850 and 1950 for production of tar and as firewood. In the 1950s the use decreased because of the introduction of the cheap fossil oil. In the 1970s stump wood became an interesting issue again as a raw material for the pulp industry. Stump lifting has today become a possible source for bioenergy. The objectives with this study were to investigate the productivity of stump lifting and stump extraction, and to analyse the economy.

Produktkvalitet på svenskt nötkött : en kartläggning av kvalitetsfaktorer inom IP Sigill

Sigill Quality Systems has been certifying beef since the autumn of 2006 using the brand name label Swedish Sigill. IP Sigill (the certifying system for integrated production) encompasses the values: animal ethics, food safety, free range and environmental concerns. Product quality is not yet one of these values, and there is a variation in the quality of Swedish beef. Swedish Sigill wanted to investigate the factors that influence product quality, review which of the present regulations that have an influence on product quality and formulate new regulations with the purpose of enhancing the product quality (sensorial, technological and nutritional quality). A survey of quality parameters and factors that influence product quality was done in order to establish a scientific foundation to work from.

Optimering av leverantörsval : En studie av Spinactor ABs leverantörsval vid byggnationsprojekt på olika orter i Sverige.

Detta arbete presenterar enmatematisk optimeringsmodell gällande val av Prefableverantör för Spinactor ABmed avseende på inköpspris med volymrabatt samt transportkostnad. Utöver dettatillkommer en kvalitativ undersökning om vilka andra kriterier som ärbetydelsefulla vid leverantörsavtal. De viktigaste kriterier applicerades i enegenutvecklad leverantörsvalsmodell som bygger på ramverket ?total cost of ownership?(TCO) där leverantörskriterierna kvantifieras. Utifrån kriterieanalysenframgick att de tre viktigare leverantörskriterierna för Spinactor AB idagsläget är leveransprecision, kundservice och kommunikation samt ekonomiskstabilitet.Lösningen av optimeringsproblemet genomfördes med två olika metoder,linjärprogrammering samt heltalsprogrammering, där linjärprogrammering vardominerande i lösningstid.

Förbränningslära för bubblandefluidbädd

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

Rackmonterad elektrolyscell

This report shows methods and workflow when exploring the potential to change Outotecs HCD Silver Electrolysis machine to a module type. It?s done as an attempt to lower the workshop and installation costs and to give customer a more accurate prize directly. To do this a concept was produced which was set to a stress test. Additional objectives were to investigate freight and installation procedures, pneumatic connections and to calculate the difference in cost.Once the concept, a reinforced type of the original frame, was chosen stress tests in computer simulations were made and appropriate alterations were made.

En modell för att kostnadseffektivt öka produktionen inom aluminium-bearbetning

The purpose of this study is from a case study develop a model that aims to cost effectively improve productivity in a manufacturing production process. The study highlights the importance of having knowledge about customer needs and using a holistic process perspective when improving productivity to identify the relations between the process stations and by this find problems that cause waste and losses in productivity. Tools and methods used to make production more efficient such as single minute exchange of die, spaghetti diagram, 5s and master production schedule is presented an applied in the model to see how these effect costs, productivity etc.Maintenance effects on quality and productivity in a manufacturing company will as well be covered in this thesis. The results and conclusions finally reveals how the process improvement tools, maintenance and production planning for example effects each other and why it is important to establish an attitude in the company where continuous process improvement should be emphasized..

Högtempererat borrhålslager för fjärrvärme

The district heating load is seasonally dependent, with a low load during periods of high ambient temperature. Thermal energy storage (TES) has the potential to shift heating loads from winter to summer, thus reducing cost and environmental impact of District Heat production. In this study, a concept of high temperature borehole thermal energy storage (HT-BTES) together with a pellet heating plant for temperature boost, is presented and evaluated by its technical limitations, its ability to supply heat, its function within the district heating system, as well as its environmental impact and economic viability in Gothenburg, Sweden, a city with access to high quantities of waste heat.The concept has proven potentially environmentally friendly and potentially profitable if its design is balanced to achieve a good enough supply temperature from the HT-BTES. The size of the heat storage, the distance between boreholes and low borehole thermal resistance are key parameters to achieve high temperature. Profitability increases if a location with lower temperature demand, as well as risk of future shortage of supply, can be met.

Franchising - ett lyckat koncept för Östgöta Brandstodsbolag? : lönsamhetsbedömning av bolagets distributionskanaler

Östgöta Brandstodsbolag started its insurance business in 1841 and is today a part of Länsförsäkringsgruppen, which consists of 24 independent and locally anchored county insurance companies. The local concept is a condition for the county insurance (länsförsäkring) idea, which means that the 24 county insurance companies cooperate freely. Länsförsäkringar is the market leader within property and liability insurances in Sweden and has a market share of 30.5%. The largest, and most well known, insurance companies in Sweden, apart from Länsförsäkringar, are If, Trygg-Hansa and Folksam. This essay treats with Östgöta Brandstodsbolag, which is one of Sweden's largest county insurance companies. The company is active in the county of Östergötland where it has the dominant market shares within home, detached houses, car and farming.

Biogasinvesteringar i Linköping : samhällsekonomiskt lönsamt eller inte?

Since some years Linköping has invested in biogas production, mainly from offal's, residuals from food industry and manure. The municipality goes for biogas in the local traffic and in all transportation. It is also possible for private car owners to run their cars on biogas. The purpose of this essay is to perform a cost-benefit analysis and examine if the project has been beneficial from a social point of view. The effects have been identified, measured and monetarily valued. The essay is limited to include the year of 2006 only.

Windbelt

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

Övergång till helkrossballast : En studie för Strängbetongfabrikerna i Veddige och Herrljunga

This exam report has been developed in association with Strangbetong AB, Sweden.The natural gravel that is being used as fine aggregate for concrete production today is an ending natural recourse and the Swedish government has decided to strongly reduce the extraction from the year of 2020. The only reasonable replacement is aggregates from crushed rocks but this material has other properties than natural aggregates. The concrete manufacturers now have to learn how to use these new fine aggregates in a cost effective way in order to ensure the quality of their concrete production.In this project, crushed aggregates and combination of crushed and natural aggregates have been tested with existing formulas for fresh concrete. The two parameters yield stress and plastic viscosity have been measured which gives a good description of the workability of the fresh concrete. Different methods to make measurements on the dry fine aggregates, has also been tested, to find out if there is any correlations between these parameters and the parameters from the measurement on the fresh concrete..

Den skogliga informationens roll i ett kundanpassat virkesflöde : en bakgrundsstudie samt simulering av inventeringsmetoders inverkan på noggrannhet i leveransprognoser till sågverk

This MSc thesis is divided into two parts. The first part deals with the need for information from forest campartments selected for clear cutting, in connection with planning in an integrated forest- and sawmill enterprise. A review of literature is followed by a case stud y, where present conditions in a Swedish forest company are compared with current research in the area. The seeond part consists of a simulation stud y, which aims at camparing the accuracy of inventory estimates using different methods. The estimates are delivery forecasts, covering one month consumptian of timber in a large sawmill.

Spetsbärförmåga hos betongpålar slagna i friktionsjord

The purpose of this study was to build a database for point-bearing piles in dense noncohesive soil, predominantly moraine. Further, the database was analysed and areas with difficult geotechnical conditions was identified.The database includes for point-bearing piles driven to refusal in moraine. Piles with mainly shaft friction have been excluded. Only concrete piles have been included. Geographically the database covers almost all geotechnical conditions of Sweden.

Varför tror vi att vissa företagär mer hållbara än andra? : - En studie om hur företags motiv och kommunikation kringhållbarhet är relaterat till konsumenters uppfattning

The number of elderly in Sweden is increasing due to improved living conditions and better medical care. It is important that society adapts to the increase and begins to work preventively to reduce the costs of the increase. An important aspect is the elderly accommodation, the cost of health care in specific accommodation is almost twice as high as those for ordinary housing. Therefore, it is important that we availability adapt dwelling to allow older people to live in ordinary housing for as long as they wish, instead of moving to assisted living before they need it. If we can fulfil the elder?s needs with home care instead, society can save a lot of money.In this report, three different forms of housing has undergone accessibility increases and been inventoried and analysed.

<- Föregående sida 47 Nästa sida ->