This master thesis consists of an investigation of the profitability per hectare in privatly owned forest land. The investigation is based on data collected from Skogsstyrelesen, Riksskogstaxeringen and Skogsforsk. During the last twenty years the prices on pulp wood and saw log have substantial decreased, but during the same time the the volumes from final felling have increased and the cost for felling has decreased, this investigation shows how the netprofit per hectARE after final felling has changed between year 1980-2005 This investigation shows that that the netprofit has stayed on a stable level during the years 1985-2005 even though prices pulp wood and saw log decreased. Much indicates that the demand of swedish pulp wood and saw log will continue to be strong or even stronger wich will give increased prices and an higher netprofit after final felling in the future.

The purpose of this developmental research was to test the new way of working when the students were to take part in planning of cooking during the lessons in home and consumer studies, because the aim of the school is to teach the students to take the responsibility for their studies. The two first lessons should be used by students in the group to plan and organize their meal. During the third lesson the students must be responsible for cooking ready their meal and afterwards they must evaluate the results. The results of this new way of working was new for the students and they thought it was fun to be responsible for cooking during these lessons in home economics. The students in the groups were of wixed ability and they developed their knowledge from the levels of their ability.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

In this degree project we wanted to investigate if there are any possibilities to get a higher income from grain growing by giving the grain to hens instead of selling it. We were also wondering if the manure has any value or if it only cost the egg producer money. If the egg producer cultivate his own grain and is able to store it in layer is there quite much money to earn. Expensive pasture makes it profitability to pay up to 1,35 Swedish crowns for a kilo of wheat. In our calculating we?ve used calculation from the company Lantmännen.

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

I dagens mångkulturella samhälle är det många barn som talar två eller flera språk. Det är viktigt att kunna bemöta flerspråkiga barn och ge dem rätt språkligt stöd vid behov. Denna studie baseras på MAINs testmaterial som är utformat inom ramarna för COST projekt IS0804 för bedömning av barns narrativa förmåga och använder berättelser till bildserier som ett sätt att samla in barns narrativer. Syftet med studien är att beskriva narrativ förmåga hos tvåspråkiga rysk-svensktalande barn och bidra med referensdata till ovannämnda projekt. Deltagarna var tio simultant tvåspråkiga rysk-svensktalade barn mellan 6:8 och 7:10 samt tre successivt tvåspråkiga barn.

Surrogate boycotts are highly threatening for corporations in terms of both economical cost and image damage. All corporations are due to our globalized environment and increased stakeholder fragmentation gradually more risking to become victims of surrogate boycotts, which of nature is hard if not impossible to predict and prevent. Corporations are generally recommended to build clear and strong corporate identities, which should be reflected in their most important stakeholders, as this will secure minimum damage on the corporate image. Even a surrogate boycott situation can have positive effects on corporations, especially in terms of image, as such situation increases the brand involvement and thereby make it possible for corporations to connect with important stakeholders on an emotional level. .

The purpose of this study was to examine how food managers of Östergötland County disucss around their possibilities of reaching the government´s orientation towards 25 per cent of the food - procured, prepared and cooked in the school meal - coming from certified organic production. The study was a cross-sectional study in wich a qualitative approach was used. The sample consisted six food managers in Östergötland. Data processing was done through a semantic content analysis.  The result showed that involvment and intrest were significant factors for the introduction of organic food in the school meal. The three municipalities with the highest percentage of organic food used the SMART - concept.

Because of increasing demand of power on Malmbanan the capacity of the existing wires which supply the trains must be increased. This increases the stress on the existing poles and for this reason the system for supplying the loads along the railway is to be removed from the poles and be replaced by some other system. This thesis is a study on a two-level low voltage (1 kV and 0.4 kV) electrical system with the aim to investigate if it can be an alternative to the system used today taking into account the voltages, fault currents and costs.In this thesis the following tasks have been performed:? Gathering of data? Description of basic theory? Loadow and fault current calculations of the system with MATLAB? Life Cycle Cost estimate of the system? Analysis and conclusions from the resultsThe results show that the new system can be an alternative to replace today's system. The simulations and calculations show that the voltage drop is at an acceptable level and that the fault currents are large enough to supply a safe disconnection if a fault occurs at the far end of the system..

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

The current situation for Swedish grain farmers facing a situation with decreasing profitability makes it necessary for the farmers to find ways of increasing the margins in their grain growing. Decreasing profitabilities along with Lantmännens closing of grain elevators contribute to the necessity for farmers to invest in grain storing and drying at the farm. By investing in capacity for drying and storage of grain on the farm it is possible to recieve a higher price on the grain sold due to the possibility to sell when the price is higher compared to the harvesting season. An investment in grain drying and storage with a relatively low investment cost that recently has appeared on the Swedish market is the grain stir drying system. This study contains a comparison of an investment in a grain stir drying system where the grain is dried and stored in the same silo and a conventional drying and storage system.

Many corporations turn to IT-outsourcing to focus more on their core competence or to cut the IT-budget. There is one caveat, the costs presented at a first glance does not always present the entire truth. Instead the costs run deeper and so-called hidden costs exist beyond the contractual cost. Reducing these hidden costs may very well be crucial to the entire IT-outsourcing endeavor. However many firms are not aware of these costs and as such they have a reduced chance of success.