This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

The rising demand for electricity and heat raises a big challange for the society and engineers. Many products have been introduced to the market to supply more energy to the energy systems. Absolicon AB is a Swedish company that develops and markets a combined heat and power generating product. The product, Absolicon X10, uses a parabolic trough to concentrate the radiation of the sun onto a receiver. The receiveris equipped with mono crystalline solar cells and is cooled by a circulating liquid media.

Rock groundwater has always caused major problems when tunnelling. Water leaking into tunnels can cause large problems, not only on the construction itself but also on the environment. A continuous water leakage can lead to a declining water supply, and geotechnical problems can occur as subsidence in the ground. Therefore it is of great importance to predict the consequences that can appear in the surroundings due to a declining groundwater surface.The aim of the study was to investigate different methods for predicting leakage and changes in groundwater level due to tunnelling excavations in rock. This thesis was performed by comparing mathematical methods, actual groundwater changes and results from preliminary investigations.Investigations were made for three railway tunnels planned by Botniabanan AB.

Aren?t you tired of never finding stuff? Take a bits as example, do you store these lose in your toolbox or carpenter belt? What if you could have it all accessible and assembled in a tool, always at arm?s reach?Today bits are used together with electric screwdrivers and handheld screwdrivers in a greater spread. For these different types of storage, from pure storage boxes to complex tools with storage built in, exist. The professional craftsmen commonly use some kind of box where the bits can be stored. Even so they tend to store their bits loose in a carpenter belt or toolbox, since they want the speed and accessibility of carpenter belt over the storage box?s tidiness.The project was started in the fall of 2010 and a referents group was early put together to ensure that the developed product became as user-friendly and attractive as possible.

In the growing concern for the state of the environment more tools are being integrated in the decision-making processes. Sweden actively makes use of environmental impact assessment (EIA), which is supposed to minimise negative impacts of a project, policy or plans on the environment. The EIA process in Sweden still requires certain improvements to be more efficient. In this study actor interaction was analysed with trust being the framework for analysis. The aim is to find out whether it is possible to use trust as a framework for analysis since trust research is very discipline dependent.

The frequency of innovative procurement is currently very low in Sweden. Innovative procurement is to procure unknown solutions to a defined problem or need for which it sometimes has not yet been established on the market.  Current Swedish procurement legislation does not prevent innovation procurement, however, it limits official authorities to actively work with innovative companies to develop new solutions. Furthermore, some conflicts arise between the Swedish procurement legislation and the basic principles concerning public procurement developed under EU law, which must be considered in all procurements. Additionally, there is not a specific procurement procedure designed for innovative solutions in the current legislation.On the 15th of January 2014 three new directives on procurement rules were adopted with the general objective to simplify the procurement process and to make the whole system more flexible. A new procurement procedure has also arisen called innovation partnership.

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

Syftet med detta examensarbete är att undersöka möjligheterna för utökad kundnytta och kvalitetssäkra implementeringsprocessen av elektroniskt informationsutbyte (EDI). Detta uppnås med kvalitetsutveckling som grund, vilket omfattar processorientering.Rapporten inleds med en beskrivning av arbetets syfte och vilka problem som står till grund. Vidare introduceras företaget som uppdragsgivare och relevant teori tas upp, detta för att bilda en referensram inför de metoder som använts för att förbättra processen. Slutligen så presenteras resultaten och en diskussion hålls kring detta, med vidare rekommendationer för fortsatt utveckling.EDI processen har visualiserats dels med hjälp av akademiska litteraturer och dels från empiriskt material. Visualiseringen av processen har bildat en översikt av dess brister och problemområden (bland annat tidsfördelningen utmed processen och grunden till låg kvalitetsstandard), vilket har gett möjligheter till effektiva lösningsförslag för vidareutveckling.

Internal communication is very important for the success of an organization. The county council Landstinget i Värmland is a large organization with many managers on different positions. Every one of these managers gets an email every week, with the message that a new manager letter, called Chef, is published on the intranet. With my paper I am examining what the managers think of this letter, how they use it and if managers on different positions differ from each other in opinions about and use of the letter. I want to find out if there is a need of Chef as a part of the internal communication of Landstinget i Värmland.To answer these questions, I have chosen a quantitative method in the form of a questionnaire which is send to all the receivers of the manager letter.

Objective: In recent years there has been an increasing interest within the clinical (medical) science in measuring people?s health. When estimating quality of life, present practise is to use the EQ-5D questionnaire and an index which weighs the different questions. The question is what happens if the individuals estimate there own health, would it differ from the public preferences? The aim is to make a new prediction model based on the opinion of patients and compare it to the present model based on public preferences.Method: A sample of 362 patients with unstable coronary artery disease from the Frisc II trial, valued their quality of life in the acute phase and after 3, 6 and 12 months.

It is becoming increasingly important for companies to meet customer demands due to intense competition in today's global market, that forcing companies to improve their offerings and become better at managing their supply chain (Shen et al., 2006).  Long lead times can be reduced by using different methods and strategies shows various researches. Lead times occur in the planning, production, inventories and handling of products (Treville et al., 2003).The aim of the study is to develop a method to analyze the factors that affect the length of internal delivery lead time in manufacturing companies. The method also included suggestions for reducing delivery lead-time to internal customers.The main factors that influenced the length of the on delivery lead times has summarized to make a selection among the factors that can have the most significant impact. The selected elements will be used as a method to analyze how these areas affect a company?s length on internal delivery lead times.The study shows that the causes of the long delivery lead times was the location of the customer order point, uncertain forecasts, long material and production planning time, and long waits in the production and storage.The delivery lead time, according to this report?s suggested improvements reduced by centralizing CODP and makes more reliable forecasts.

The purpose of the present qualitative study is to create knowledge about librarydigital services and their marketing to patrons with disabilities in Armenia, on theexample of the National Library of Armenia, as well as, to discover opinions of theNLA librarians and patrons with disabilities about the importance of library digitalservices to people with disabilities. Literature review and qualitative interviewing has been employed as methods to collect the empirical data. The results have been analyzed and discussed based on the library-marketing model of marketing research, marketing segmentation, marketing mix strategy and marketing evaluation suggested by Koontz & Gubbin (2010). It has been concluded, that 1) e-accessibility issomething new at the NLA and the NLA does not provide equally available knowledge, resources, services, facilities to patrons with disabilities, because of the following main challenges: lack of continuous funding and support from the state, lack of appropriate facilities and technologies, lack of qualified staff, and historicallyinherited library infrastructure impediments; 2) no library service marketing is conducted to patrons with disabilities at the NLA; 3) the opinions are that provisionwith such services is very important to people with disabilities, since they allow those people to gain access and use information in formats adopted to their various needs, and, of course, they become integrated into the modern society. The important role of a library as a non-discriminator and copyright protector in a developing country when delivering digital library services to patrons with disabilities has also been discovered..