Quality assurance of construction projects and create effective ways of working, is intoday's pressed position, major objectives for building contractor companies. This thesis is an attempt to see if it is possible to achieve these goals with the new modern tool iPad.The author of this thesis has during the latter half of his one year practice work in Uppsala for the Swedish building construction company NCC Construction Sverige AB, conducted a study on the possibility of using the iPad on an construction site. This has been done with active field studies in which applications have been tested and also the supervisors receptive. The usability of the iPad has always been in focus since it is important that the applications are easy to use and easy to learn.The results of the work, as presented in this report, points at opportunities in efficiency if the iPad is introduced and used on construction site. There are many useful applications for the iPad, and with a system that can handle the synchronization between the iPad and the computer, the workflow will be streamlined significantly..

There are problems with poor quality, poor scheduling and poor working climate in the Swedish construction industry. Many parts have been involved, trying to solve the problem.This spring a new planning and building-law becomes final. In this law, the requirements set on the controls are greater. Hopefully this will lead to fewer construction errors. The requirements set on the working environment have also increased, forcing consultants and contractors to focus on safe workplaces.For each project requiring a building permit, an inspection plan has to been drawn.

The purpose of this thesis is to examine how the working method partnering has been welcomed in the Swedish construction company NCC and find possible explanations to this. The theoretical background used to understand and discuss our findings mainly builds on value and network dynamics. The empirical study is of a qualitative nature and builds upon 13 semi-structured interviews and the participation in a two-day start up workshop with 21 representatives from involved parties. The study shows that partnering has been positively accepted at NCC. Possible explanations for this can be found in the contrast the method represents to the traditional way of working within the construction industry.

Syftet med examensarbetet är att hjälpa ett företag med att införa standardlittera för deras prefabricerade betongelement som ingår i deras Konceptet. Införandet av standardlittera ska resultera till att återfinna och gruppera deras betongelement i CAD-systemen. We did our thesis project at one of the most prestigious Swedish construction companies. We have examined the possibilities of doing sandwich elements to standard elements which would increase the degree of industrialization. The company has developed a concept that is based on a more refined process of industrialization.

The aim of this study was to investigate and compare the availability of construction materials affect children's constructions and play. Observations were made when the children were allowed to play and build with very little and much of the material play-doh dough in preschool. The study is aimed at children aged 3 ? 5 years. Interviews were also conducted with educators in departments where the children spent time to give support to this study.The result shows that the children create as many designs of any material amount.

The construction market has, as a result of the crisis in Europe been uncertain in recent years. During the year 2013, the construction will be stabilized, in particular Finland. The geographical proximity between Sweden and Finland and similarities in cultures and climates makes Finland a coveted market for many Swedish companies.Differences in national regulations and guidelines, which are produced by the authorities in different countries, are examples of barriers that may hamper the process, including for Swedish villa suppliers, to establish themselves on the Finnish market. It may be useful when facing a new export drive, to look up what similarities and differences there are between the countries building codes, to prevent mistakes and unnecessary costs to the project work..

AbstractThis essay discusses the negotiation of the Comprehensive Test Ban Treaty (CTBT) and the process that led up to a signed agreement. The CTBT forbids all nuclear weapon test explosions and all other types of nuclear explosions. The purpose of the study was to distinguish the critical steps of the negotiations that resulted in the success of the CTBT. Based on these insights, my intention was to identify relevant events and actors in the process around the Fissile Material Cut-off Treaty (FMCT), which has been on the nuclear disarmament agenda for over a decade. Furthermore, my ambition was that the examination of the CTBT negotiation would give me some clarity in what the next step would be to get the FMCT back on track.

BIM has been a trend in recent years when it comes to design and construction ofnew buildings. However, there has been less talk about what happens to BIM modelsafter the construction phase.This issue has been raised at the Forsmark construction documentation department.This thesis aims to look at how the information in a BIM model can be transferred tofacility management and GIS systems and thus add value, even after the constructionphase.Questions raises how such an exchange might look like and whether it is reliable.How should a claim be brought to planners for such an exchange to work.This thesis tested some of the most common methods for this kind of exchange ofinformation from BIM models to facility management and GIS. It was formats like IFC,Fi2xml and a database connectivity that was analyzed by a computer simulation of amodel provided by Forsmark. The model consisted of an existing office building atForsmark, modeled in Autodesk Revit.The results indicate that the formats tested require a precise plotting of the models.The loss of information that came to light in the simulation could be attributed tofailure modeling in Revit. Even such things as naming of areas must be consistent.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

This report deals with issues related to construction waste. Building material that has not been built into the project is defined as construction waste. Cost of construction waste amounts to 4-12 % of the total cost of the project. Moreover, cost of construction waste is 1-3 % of the production cost. The aim of this study is to increase knowledge about the main causes of waste within the construction industry.

Course: Master's Thesis in Business AdministrationPurpose: The purpose with this paper is to give an insight, and to compare, the project management of two IT-projects ? one which product was implemented and put into use, and one, which was implemented but no longer exists on the market. Furthermore also examine the critical success factors that influence the success respectively the failure of the IT-projects. Method: To attain the purpose with our study we have chosen a qualitative method. We have carried out interviews with two of the project managers of the IT-project of the two large companies.Result: A couple of problems occurred within the IT-projects of the large companies.

Study objects: JM, Folkhem and ABB.Purpose: The purpose with this study are to examine how the supplier relations are in the construction branch and compare that result with how the supplier relations are for ABB a production company.Theoretical: The theoretical chapter illustrates important and relevant parts of supplier relations, purchasing and supplier strategies to give good overview. The theoretical review will combine information from different fields to consent with the research problem.Method: A case study has been made on three different companies, one of the companies was active in the production industry the other two were active in the construction industry. Data was mainly collected through semi structured interviews on each of the three companies.Conclusions: The size of the company decided which point of view the company had on purchasing, traditional or modern view. All three companies had a centralized purchasing organization but the construction firms were more decentralized than the production company. The reason was that the construction firms were dependent with more flexibility when every construction project is unique..

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

In Sweden there are 299 000 working in the construction industry. The construction industry is one of the industries where most accidents occur every year. During the last ten years there have been 111 death accidents in the construction industry and 48 of them were falling accidents. That means, in average, one death accident every month.Falling accidents gives serious injuries to the persons who are affected by them. It is anticipated that this report will investigate the factors beyond the falling accidents and also to present proposals that can decrease the number of falling accidents in the future.To secure a healthy and safe construction site it is of great importance that both the employers and the employees cooperate towards the same goal.

 Abstract  Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.