Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

This thesis focuses on the construction of drystone walls in the county of Sm?land, as well as their historical value and significance to the county. In Riksantikvarie?mbetets Plattform Kulturhistorisk v?rdering och urval, a directory for historical evaluations of buildings and objects, the first clause is to describe the object and its history. When trying to do this, the lack of literature focusing on the constructional elements of drystone walls and their history became an issue and is what prompted the writing of this thesis. With a study of different handbooks, a compilation of the constructional elements of the walls were put together.

Lately, more and more music festivals have emerged in Sweden. People?s desire and need to visit these events only seems to increase. Cultural tourism and music tourism has developed into a significant and important part of the experience industry and it employs more and more people within the tourism industry. The purpose of this paper is to investigate which effects this can have on the local community.

Urination is a biological need but the routines surrounding urination are culturally specific and ever changing. This makes the organization of public space an important part in deciding what actions are made possible for the people in it. This paper considers women?s public urination and the possibilities to merge the need to urinate and the construction of the female body as feminine.A number of texts that describe the construction of the female body and identity as both gendered and socially produced are analysed in relation to women?s experiences of incontinence. Incontinence as a medical diagnosis is by this becoming possible to question, and may be seen as one of several strategies used to manage both the organization of the public space and the expectations of the female body to be a docile body.The conclusion is that a woman who wants to enter public space has the following options when it comes to the need to urinate:To strive for the feminine ideal.

TitleEnergy-efficiency ? of slab blocks built in the sixtiesAuthorsRichard Sandahl and Kim SöderbergEducationHalmstad University, Section for economy and technique Construction Engineering 180 ECTSSupervisorMargaretha Borgström, Universitylector construction physics, Halmstad UniversityContact person at HFABUlf Johansson Heating, sanitation and energy co-ordinatorReportExamination paper at the construction engineering program is performed in cooperation with HFAB (Halmstad real estate concern Inc.)AimThis examinations work is done in cooperation with HFAB and there project on the block around the street Maratonvägen. HFAB:s dwelling stock on this area are going through a bigger renovation and in relation to this they are looking on the possibilities to make this building more energy efficient. That is why this examination paper has as purpose to answer the question if it is possible to make slab blocks built in the sixties more energy efficient. This is done by calculate energy efficient measures on a chosen apartment block at Maratonvägen in Halmstad, in an energy and expense perspective.MethodThe examination paper is based on different methods, mainly calculation but also qualitative conversation studies, economic calculations and literature studies.

The design regulations of Boverket (BKR) have long been the mandatory standard for construction design in Sweden. However from the end of the year 2010, the BKR will be replaced by the European standard Eurocode (EC). The transition to EC has been delayed and it is not until the second of May 2011 that the use of EC will be mandatory. Because EC and BKR differ from each other it is highly interesting to investigate and explain these differences.The purpose of the thesis is to compare the two standards and investigate how they give different results or not for the dimensioning of structures of steel with associated loads. The current project HVC (Pets Science Center) in Uppsala is used as a model for the design of the steel structure used in this study.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

3D, 3D-projektering, IFC, Revit, Navisworks, Cad-Q.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

Background: The global responsibility for multinational companies is a current matter of subject. Now when the world increasingly is getting globalized, economic growth is created, which brings a bigger demand of responsibility on companies. The leading companies from every industry is often becoming the frame for how the production process works and is therefore exposed to outer pressure which, for example, is coming from consumers and the media. Since consumers at present are more aware of what they are buying and where it comes from, it is important that the companies take social responsibility. We have therefore studied three big companies within the clothing industry to see in witch way they are taking their social responsibility.Purpose: Our purpose was to explore how companies within the clothing industry describe their work with Corporate Social Responsibility, code of conducts and where the incentive behind this work is coming from.Method: We have, through a qualitative study, examined how three large companies work with Corporate Social Responsibility.

Purpose: To examine how IR-related press releases affect share price for stock companies, and to explore how said companies practice Investor Relations.Methods: The study was conducted using an event study as well as e-interviews. The event study has a quantitative deductive research approach where the market model is used for calculating the abnormal return based on press releases. The e-interviews have a qualitative research approach and follow a semi structured interview guide. The study includes all listed stock companies within the Swedish Construction industry and includes press releases from the last decade.Theory: The study is based on the efficient market hypothesis and its semi strong form, theories within Investor Relations and previous research.Results: The event study shows a significant negative abnormal return during a four day period starting the day after the press release event. The negative abnormal return could derive from investor relations being used by companies as damage control, or that the investors? expectations are too high as a result of IR.

Tourism is often being viewed as one of the worlds largest sectors and a great contribution to growth and development. There is a large motivation amongst developing countries to promote themselves as a tourist destination, since they expect the tourism to generate economic growth. The government of Thailand has been promoting tourism since 1960, and the number of foreign visitors has increased from 100 000 back then to 13.5 million in 2006. The purpose of this paper was to investigate weather the increasing tourism industry in Thailand has pulled resources away from other sectors of the economy towards the tourism sector, and in that way harming Thailand?s international competitiveness and causing deindustrialization.

Problem: Small companies dominate the skin care industry, and they also face moredifficulties, constraints and resistance in strategy implementation and sustainabilitywork than other operators. Still, the trend of sustainability strategies increasesignificantly precisely in this industry.Purpose: The purpose of the study is to contribute knowledge to the field ofsustainability strategies and motives for the implementation of them in smallercompanies who engage with skin care, in Sweden.Framing of a question: Why do some smaller Swedish companies in the skin careindustry choose to implement sustainability strategies in their business?Literature: The literature functions as a framework for the study and is considered toidentify the possible reasons why small companies choose to implement sustainabilitystrategies or not. The literature is collected before the empirical data.Method: This paper is constructed by a qualitative method approach. The empiricaldata were collected through interviews, by telephone, personal meetings and email,which were then transcribed and the interpreted by a model, which the authors havecreated.Conclusion: Smaller companies are often met by larger resistance and an until up tothe present slowly emerging industry with vague rules and controls as well as ancomparative knowledge of what is good and what is not.

AbstractBachelors thesis, Bygg och fastighetsekonomprogrammet vid Högskolan i Halmstad Vårterminen 2009Authors: Emma Stenberg och Emma SvenssonTutor: Sven-Ola CarlssonTitle: Ägarlägenheter - en framtida investering Background and problemThe concept of owner?s apartment has been discussed in Sweden since the 19th century. It was not until the first of may 2009 that it got legislated to be allowed in Sweden. The concept that people should be allowed to own their apartments instead of owning a part of the tenant-owner?s association is a new phenomenon in Sweden.