Sökresultat:
5004 Uppsatser om Construction project - Sida 19 av 334
Oxygen Health : Inlösning av syre i vatten
The project has been provided by Zenit design group and the goal for this project was tomanufacture and perform tests of a prototype that supersaturates water in a continuous flow ofwater. The project has involved finding and sorting out relevant data in scientific papers, books,communication with foreign manufactures and other platforms for information.The project has resulted in manufacturing of a test rig and an oxygen infuser based onmembrane technology. The test rigs purpose was to perform tests on oxygen infusers fordifferent comparison test and performance benchmarks in a in a laboratory provided by Zenit.The project led to satisfying results using the oxygen infuser manufactured by the authors withcomparable levels of saturation to the reference infuser.The theory behind this project is based on medical research, belonging terms will be explainedbut the authors have chosen to delimit the project from the medical area. The reason for this islack of knowledge in this area and its irrelevance to the mechanical engineering education insuch..
?När farsan sa att han inte ville ha mig och pekade på dörren gick jag bara ut? : ? ungdomars upplevelser och erfarenheter av att rymma eller kastas ut hemifrån
This thesis has been written within the research project ?Tillfälligt Uppbrott?, which concerns youths who have run away or been thrown out of their homes. The project is based on a na-tional poll among more than 3000 high school students. Our purpose has been to study youths who have left home and their own experiences. We have looked at all the question-naires in which the youths stated they had left home and focused on their answers to five open questions.
Redesign of an existing apartment block in Kv Preussen to passive house
Passive houses are a relatively new concept in Sweden and by that it is meant a house without a traditional heating system. The most acknowledged passive house project is the terrace houses in Lindås, Gothenburg, which we have used as a reference. This project concerns a square apartment block. So far, no square apartment block has been built as a passive house in Sweden.The common opinion in the construction industry is that it is not economical to build extremely energy efficient houses. With Peab as commissioner our task was to investigate if that is true, if regarding the construction of a multi storey house as a passive houseMidroc, now owned by Peab, constructed in the block of Preussen in Jönköping during 2004-2005 four houses, with 132 apartments distributed on seven floors.
ini
Preporsition for bachelor thesis project, working from the inside and out. Emphasising spatial quality and experience, More or less ignoring form and program. I?ve had issues with these aspects in earlier project, the form or the program takes alot of place in the project. I haven?t tried this approach before, it?s an attractive thought to allow the project take a form of it?s own, enclosing those spaces i create.The initial concept was to place the pools on the ground (not digging them into the ground) making them volumes that divide and define spaces.
Projektledning : En studie om en effektiviserad projektledningsmetod till TS Produktion
The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..
DFM för Lasersvetsning
The purpose with this thesis was to develop a designguideline which will simplify the development of new products that will be laser welded. The need for this thesis has come forward from the quality problems that Volvo Construction Equipment, Components Division is having with their laser welding manufacturing unit. The reason for the problems emerges from the bad communication between the development unit and the manufacturing unit within the company when the products produced today was developed. This resulted in products that were hard to and in some cases almost impossible to weld. To avoid these problems from occurring again it was needed to gather the experiences within this area and compile it and present in a brief a pedagogical manner. The information for the groundwork of our results has been gathered by interviews of several key persons in Volvo Construction Equipment, Components Division.
Kilhus i plast : Omläggning av stålprodukt till produkt i plast
AbstractOur bachelor degree thesis was carried out in collaboration with Ivar Petterssons Järnmanufaktur AB in Smålandsstenar. We were asked to replace their wedge housing, used to fasten the wires to the power lines, with a similar structure in a plastic material. The idea for this project started with Ivar Petterssons Järnmanufaktur AB having problems with the casting quality that forced them to perform expensive tests on each of the wedge houses to ensure the quality. They are currently produced in China which is also a major drawback because it requires expensive long delivery times.The method we used is Fredy Olsson's Princip- and Primärkonstuktion (1995). We have consistently been in the project on so-called "broad front", which means that you create several sketches, ideas and changes in parallel, and then evaluates all.
Den offentliga upphandlingen implementeringsproblem.
This thesis is a cultural theoretical case study of the art project (O)önskad samhällsförbättring.Via an analysis of the project, that is based on theories of power, resistance and contemporaryurban development, it examines the construction of urban space, its impact on public art including the ability of art to initiate evolvement of the urban public space.The last decades art has plaid an important role in what is called the creative city; to become attractive nodal points of the global economy, larger cities increasingly invest in art,culture and creative industry. Simultaneously the urban public space is limited to activitiesand expressions of art that are presumed to create economic growth. This introduces animpression of what is allowed and what is not allowed, possible and not possible, wished andnot wished which, as a consequence, evolves the public space. The events during the artproject and the reactions that followed enlightened these limitations. This tells a story, not only about the structuring process of the local urban space, but also important changes that are created as a simultaneous effect at different levels in society, as well locally as globally.
Effektivisering av logistiklösningar : En jämförelse av nya och gamla logistiksystem vid ROT-projekt
A persistent problem in the construction industry is its low margins of profit. It is often difficult to earn money due to low efficiency and high costs. Logistics on the construction site answers for a large amount of these costs and it is therefore of interest to find new, more efficient logistic solutions. The purpose of this thesis is to compare two different logistic systems and further to evaluate which one that is the most efficient and profitable. A comparison is made between the traditional logistic systems used for years and a new logistic system developed by an industry association called BEAst.
Lean Construction inom en geografiskt begränsad marknad
Syftet med studien är att undersöka om en geografiskt begränsad marknad inom byggbranschen underlättar en implementering av Lean Construction. För att undersöka detta har jag utgått från två forskningsfrågor: vilken inställning de tillfrågade byggföretagen har till Lean Construction och hur de arbetar utifrån ett Lean-perspektiv? Utifrån ett antal grundprinciper från Lean Construction formades en enkät för datainsamling. Resultaten från undersökningen visade att respondenterna som bestod av platschefer/arbetsledare och underentreprenörer överlag tyckte att de områden som tagits upp var viktiga för en lyckad byggprocess och en stor del av respondenterna även arbetade utifrån ett Lean-perspektiv. Enkätundersökningen tog upp nio områden: samarbete, Visible Planning med detaljerade veckoplaner, Just-In-Time, slöseri, standardisering, Kaizen, innovationer, Last Planner med arbetsplanering och Percent Plan Complete från Last Planner konceptet.
Att planera ett storskaligt krishanteringsprojekt : En fallstudie om MSB:s ebolainsats i Västafrika 2014-2015
In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.
Vindkraftens påverkan på lokalsamhället : en fallstudie
The purpose of this thesis is to investigate how a local community, and those who dwell within its borders, are affected when a large scale windmill park is planned in its immediate vicinity. I have used a qualitative approach and conducted semi structured interviews to gather empirical data. The study took place in a small Swedish village named Svartnäs, situated in the region Dalarna.I have used the concept of community as a symbolic construction (Cohen 1984), that together with the theory of structuration (Giddens 1984) and the notion of expert system (Giddens 1996) served as my main theoretical perspectives.Even though the windmill park is not built yet, its impact on the people and the local community of Svartnäs has been considerable. In the traces of the new windmill park new options and constraints, that will play an important role in the lives of the people who dwell in Svartnäs, are arising. The windmill project is enlarging old conflicts and is creating a divided village.
En studie om individers upplevelser av arbetslöshet, mindfulness och stress
The aim of the study was to examine individuals' experiences of participating in 5 week mindfulness program as a tool for job seekers. Qualitative methods were used to interview three students and two mindfulness educators. The informants were asked to answer questions about their experiences of having participated or practiced mindfulness in the project. The results showed that all respondents experienced the project as positive. The participants describe that the project helped them to get out and meet other people and with routines in their life. The participants also said that unemployment caused alienation and they felt themselves to have poorer health when they were unemployed.
Färg möter ljus - med inspiration från staden
This project is about color and light and how it affects the atmosphere in the city. I choseto look closer into the central parts of the city, a place where I often feel a lack of lightand color, especially during the winter season. In the beginning of the project I made ananalysis of how intense colors are used in the city and how we can use color as a tool tocreate effectful spaces. Further into the project I chose to look closer into the effects thatare made by the facades, how the light from the windows affects the room outside when the dark falls. At the end of the project I caught a feeling inspired by the city and applied it into an installation of light..
3-D handlingar, GPS-styrning och VA-moduler- En ny metod för framtida anläggningsprojekt
Ground construction has to a large extent been dominated by traditional meth-ods during the last 50 years. Although the construction has been changed meanwhile innovations are not accepted. In collaboration with NCC Ltd Region South, I have examined a modern con-struction methodology that has been developed by NCC for future large pro-jects. The method is divided into two central phases. Phase 1 is? Single Pro-duction? which is a preliminary period for ground constructions to come.