Presently Sjöfartsverket do their maintenance according to a standard program, which means that every maintenance task will be done when the task limit occurs. This leads to a very long downtime for the aircraft in some occasions and very short downtime in others. The goal with this work is to reach a higher regularity of the aircraft operation. To reach a higher regularity for the operational needs, this work will present a hypothetic better maintenance concept for Swedish Maritime Administration. The concept is based on equalized maintenance structure, which means that every maintenance occasions are meant to take the same time to perform.

The environmental monitoring in Sweden has been developed by several different parties and is now being coordinated and made more effective in order to meet the current demands on high quality information regarding the state of the environment. Sweden has been divided into five different water districts based on watershed areas because of requirements in the Water Directive of the EU. In Sweden there are two common types of environmental monitoring programs used to gather information on changes in time and in space. Currently both these two types are used for lakes in the water district of the western sea but only one is used for watersheds. The purpose of this report is to supply basic information regarding the possible need for a second environmental monitoring program for watersheds in order to better describe the spatial variation within the district as well as to determine the number of samples necessary in order to describe the district over time and space.

The degree project has been implemented abroad in Brisbane, Australia. A literature study has beenperformed parallel to the practical work within the subject »Corporate identity through graphicaldesign«. In this study deeper research has been made concerning the establishment and manifestationof a corporate identity and its program. The knowledge given from this study has been put into practicethrough two larger projects.The first project was carried out at De Pasquale, advertising agency in Brisbane, where a corporateidentity program was designed for a new company. The company is a fitness centre, called KnockoutFitness, which specializes in different types of boxing training sessions such as Boxing, Thai Bow andBoxercise but also Aqua aerobics.

För att ta reda på hur väl en Multi-Agent-Systems-bot kan stå sig mot andra, icke-MAS-bottar, så har vi implementerat en bot till brädspelet Arimaa. Botten är implementerad i C++ och den kan spela mot andra bottar, eller människor, genom Arimaas officiella hemsida. Syftet har varit att skapa en fullfjädrad bot som både klarar av att spela korrekt, och att spela bra. För att ta reda på om MAS är en bra designfilosofi för Arimaa så har vi utmanat ett antal av de bottar som andra människor skapat och lagt upp på hemsidan. Alla bottarna har under tiden de legat uppe blivit rankade genom tävlingar och utmaningar och flera av dessa har tävlat om stora pengar, vilket betyder att människor har lagt mycket tid på dem.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.

This thesis is the result of the class Examensarbete, 15 credits of the mechanical engineering program at Halmstad University. The class represents the final part of the program with the aim to attain a Bachelor of Science. It´s a project made during the spring 2014 in collaboration with Alutrade AB and ScanBox Thermo Products AB.The assignment is to develop a new transportation trolley for ScanBox. The aim is to complement their range with a product that opens up to new markets. That set new demands for materials and also manufacturing- and assembly methods.

AbstractThe aim of this study is to investigate the implementation process and the implementation steering of the social development aspects, gender equality and integration, in the program for regional development of the region Kronoberg in the period of 2004-2007.The study asks three questions: 1) How have the social development aspects, gender equality and integration, been implemented in the program for regional development of the region Kronoberg? 2) What has facilitated or hindered the implementation of the two social development aspects? 3) What possibilities to steer the implementation process of the two social development aspects exist at the governmental and at the regional level?In order to answer these questions a qualitative method has been used. To be able to analyse the empirical material, which consists of documents and interviews, the theoretical framework comprehends the policy process and implementation steering. The conclusion is that the incorporation of the social development aspects in the regional development program does not fully correspond with the central intentions, and that is due to circumstances at the regional level..

The majority of all power cuts that affects individuals and communities are caused by earth faults on the power transmission lines at 10kV and 20kV level [1]. If these power cuts could be eliminated, less disturbances and interrupts would lead to large amounts of money savings.Swedish Neutral has developed such a protection system. When an earth fault occurs power is injected into the neutral point of the transformer. The RCC (Residual Current Compensation) protection calculates a compensation current exactly 180 degrees out of phase to the fault current. Doing this, the voltage at the fault location becomes very close to zero, without affecting the power transmission.The protection system can only compensate automatically for the fundamental frequency (50Hz), and manually for the 3rd, 5th, 7th and 9th harmonics.

In today?s society we depend on technology to perform the simplest tasks. Whether we are engaging in conversation with a friend or are navigating in traffic, we are likely to be found with some technological device in our hands. This dependence has grown over a period of time, and many of us have failed to reflect on the impact technology has had on our lives. The emergence of so-called One-to-One projects, where teachers and students gain access to a personal laptop, does however provide an excellent opportunity to do so.

Syftet med denna studie har varit att studera hur gymnasieelever på yrkesförberedande-och studieförberedande program upplever sin lärmiljö. Upplevelserna kan i sin tur påverka lärandet. Med lärmiljö menas den plats där eleven befinner sig och skall lära sig något, i det här fallet lärmiljön i skolan. Studien genomfördes i form av en enkätundersökning om lärmiljö och lärande med slutna och öppna frågor. Enkäten delades upp i tre olika delar med fokus på lärmiljö.

Background: Infection with Human Papillomavirus, HPV, is one of the world's most common sexual transmitted infections. The virus causes genital warts (condyloma) but certain virus types can cause cancer. The most common cancer type caused by the virus is cancer of the cervix. Nowadays there is a screening program for women between 23 and 60 years of age where Pap smears of the cervix is taken to discover abnormalities at an early stage. Cervical cancer is very common all over the world and this screening program saves many lives, but not in the less developed countries since the screening program is too expensive.

Detta examensarbete belyser hur svenska skolor arbetar mot mobbning. Mobbning är ett stort problem som orsakar stor oro bland skolbarn. 1969 ville läkaren Peter-Paul Heinemann uppmärksamma mobbning då han upptäckte att många barn blev mobbade och att vuxna inte brydde sig. 1973 forskade psykologen Dan Olweus kring pojkars beteende kring mobbning. Detta var början till antimobbningsarbetet.Det finns ett flertal antimobbningsprogram och jag har valt att undersöka Friendsprogrammet och Olweusprogrammet.

Tårsubstitut används mycket bland linsbärare och personer med torra ögon. Detär vanligt nuförtiden att arbete i kontorsmiljö och vid datorer ger problem medtorra ögon, Computer vision syndrome (CVS), och att dessa personer dåanvänder tårsubstitut. Ofta står det i tårsubstitutens bipacksedel att de kan geproblem med dimsyn en stund efter applicering.Tidigare studier har visat att aberrationerna i ögat ökar vid applicering avtårsubstitut och möjligtvis är det anledningen till att dimsynen uppkommer.Syfte: Syftet med studien är att ta reda på hur mycket synkvaliteten påverkas avtvå olika tårsubstitut och hur lång tid den påverkas.Metod: Metoden innebar att närvisus och aberrationer mättes på 30 patienter (60ögon) först utan tårsubstitut. Sedan applicerades det första tårsubstitutet(Systane) i höger öga och ytterligare en mätning av närvisus och aberrationerutfördes. Därefter gjordes ytterligare 5 mätningar av aberrationerna, en var fjärdeminut.

Examensarbete 15 poängi lärarutbildningenhöstterminen 2007SammanfattningFörfattare: Robert Grandén?Man är trygg här på nåt sätt?En fallstudie om gymnasieskolans individuella program.?You feel secure here in some kind of way?A study about the individual program in high school.Antal sidor: 35Mitt ämnesval tog sin bakgrund i att jag arbetat fem år som högstadielärare och var nyfiken på vad som händer med de elever som inte tar sig in på ett nationellt gymnasieprogram. Den heta debatt som pågår om det individuella programmets vara eller inte vara var ännu ett skäl för mig att lyfta ämnet. Syftet med det här examensarbetet var att undersöka om det individuella programmet hade en större betydelse för eleverna som gick där än att bara läsa upp sina betyg. Jag ville även undersöka vad dessa elever hade för erfarenhet av sina tre år på högstadiet samt hur lärarna på det individuella programmet såg på sin lärarroll.

Universal Design is a well established methodology with the fundamental purpose of designing products to be usable for as wide audience as possible, without the need of special adjustment to suit the individual. In this essay, Universal Design has had a clear influence in both the process and the result. The choice to use Universal Design as methodology in this usability evaluation, has essentiallv to do with the target audience.As a part of the design process of MyTobii C8 has Tobii Technology ask for a usability evaluation. MyTobii C8 is an 8" touch screen computer with a windows based operating system which will initiate the software MyTobii C-Series Control. MyTobii C-Series Control is the control panel for MyTobii C8, whose interfaces constitute the platform for various modificarion of the unit.