The report begins with a general inventory of possible technical faults in a hydropower plant and of possible fault indicating measurements. Then an investigation is made concerning a few different faults. Based on this investigation a choice on seal box condition and water leakage is made as problem for a more thorough examination, in which it is concluded that the turbine water leakage is larger when the turbine is put into operation. The examination ultimately results in a computer alarm for faults related to the seal box. Finally a few things are mentioned about flow measurement and pressure measurement in relation to the project as a whole..

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

Många små- och medelstora företag har idag en hemsida. För att en hemsida skall vara ett effektivt kommunikationsmedium med kunder krävs dock att den är uppdaterad. Vi anser att många företag ej förutser vilka resurser som krävs för att hålla sidan uppdaterad. Vi vill därför kartlägga vilka problem företag i dagsläget upplever att de har med sitt uppdateringsarbete. Vi vill därefter se om det finns en möjlig lösning i verktyget Smelink WEB ifrån Smelink AB, som säger sig underlätta webbnärvaron för denna typ av företag. För att undersöka ovanstående frågeställning har vi valt att gå ut med en enkätundersökning rörande hur uppdateringsarbetet går till i två grupper av företag. Den ena företagsgruppen använder sig utav Smelinks verktyg och i den andra företagsgruppen vet vi ej hur uppdateringsarbetet går till. Då vi sammanställt resultatet kunde vi konstatera att det ej fanns några omfattande problem rörande uppdateringsarbetet hos de företag som vi undersökt.

 Purpose/Aim: The goal of this thesis is to examine access and knowledge computers and the Internet among the senior-year students of Anacostia High School. Do the students of this facility have the same opportunity as the residents from better socioeconomical backgrounds or are they being excluded from the technology? Material/Method: To approach the thesis goal I have used a quantitative method. More specifically, a questionnaire was handed out to the senior year students at Anacostia High School. Main results: The study has shown that most of the students of Anacostia had in some way access to computers and Internet.

Volvo Construction Equipment Components AB (VCE) har det globala ansvaret för utveckling och tillverkning av drivlinekomponenter inom Volvo Construction Equipment. Ansvarsområdet omfattar dieselmotorer, transmissioner, axlar samt fordonselektronik. I Eskilstuna produceras axlar och transmissioner till dumpers och hjullastare. För att företaget skall kunna vara konkurrenskraftigt i dagens dynamiska situation är det viktigt att ständigt förbättras och skapa förutsättningar för framtida förändringar. Den hårdnande konkurrensen på marknaden medför att tiden mellan nya produktmodeller minskar vilket medför att behovet ökar att på ett snabbt och kostnadseffektivt sätt ta fram prototyper.

The forestry companies? operational planning process is these days dependent on reliable, efficient and user-friendly computer-based support systems. This study is an evaluation of Holmen Skog's current computer-based systems. The aim of this study is to: ? investigate the work pattern of the production managers when using the information system to plan the harvesting operation; ? investigate the efficiency and user friendliness of the information system with the different work patterns and to find the strengths, weaknesses and bottlenecks in the current system; ? find out if the type of object, the volume, the area of the harvesting object affects the time and work pattern; ? examine how this type of study is met by the employees and what factors that is critical to avoid feelings of intrusion. The conclusions of the study were: ? there is a large variation between the work patterns of the production managers and the time spend to perform the operational planning; ? the mainframe computer system used by Holmen Skog is clear, has short response times, is robust and conveys relevant information; ? the computer systems are however divided in many subsystems.

The purpose of this study was to examine how teachers practice Arne Tragetons theory of using computers as the first writing instrument in reading and writing development. We wanted to clarify how the work from using Tragetons theory was applied while investigating if and how other methods of reading and writing instruction were used. Our interest lays in how the teachers accomplished the knowledge of this theory and also how the choice of this approach came about. To investigate this we used interviews with a qualitative nature, where seven active teachers were interviewed. They worked in three different schools in years one to three, they were all women and had various long experiences of work on the computer writing tools.

Problem:I dag finns det ett stort behov av säkra identifierings metoder på Internet. Traditionellt sätt är en handskriven namnteckning en form av identifiering och vad som behövs är en elektronisk motsvarighet. Hypotes: "Elektroniska signaturer leder till ökad integritet och säkerhet vid identifiering på Internet" Syfte: Målet och syftet med denna uppsats är att studera och analysera huruvida elektroniska signaturer kommer att bidra till ökad integritet och säkerhet vid identifiering på Internet. Slutsats:Genom att jämföra praktiska erfarenheter (fallstudie) och teoretiska kriterier kunde vi analysera oss fram till att vår hypotes är sann.

At Flight and Systems test Saab AB, a post-processing software is used to process GPS data. A new software by the name GrafNav has been purchased and the purpose of this master thesis therefore became, partly to make a judgment regarding GrafNav?s ability to estimate position, velocity and accuracy, partly to if needed improve the estimate and finally find one or several methods to estimate the position and velocity accuracy. The judgment of GrafNav was performed partly by a comparison to the former post-processing software (PNAV) and partly by a comparison to the airplane?s inertial navigation system (INS).

Human Computer Interaction (HCI) is a broad discipline that studies different concerns regarding interactive systems? development. One of the major interest points within the discipline is the reasoning behind building specific functionality into computers and the long-term effects that usage of systems will have on humans.Within Human Computer Interaction there are theories and frameworks how to involve a user in the process of developing new systems. In this paper focus is applied to the development process within developing applications for Enterprice Digital Assistants (EDA) and to what extent the end-users are involved in the process. Fazer Bageri AB has been choosen to represent a business corporation that uses handheld computers in their everyday tasks.The method used to gather information for this study has been by performing interviews and observations with key stakeholders at Fazer Bageri AB and MobiOne AB.

Augmented reality is a technology thatcombines the perception and interaction ofvirtual objects with the real world. Itcan allow a user to visually see computergenerated models and informationinteracting with the real world through ahand held device such as a tabletcomputer. This opens up a range ofpossibilities, especially in theconstruction sector. A construction siteis permanently changing and the need forprecise and updated information iscrucial. The ability to enhance the realworld with virtual objects and informationmay make many plans printed on paperabsolete.This report describes how workers in theconstruction sector would benefit fromusing augmented reality on a tablet innumerous situations and the technologyneeded to achieve AR on a tablet.

The purpose of this thesis is to investigate the fatigue life of two components in different hydraulic quick couplings. The crack which initiates the fatigue failure usually occurs in the bottom of one of the threads. Thus, the threads in the coupling are carefully investigated. A few different approaches for determining the fatigue life are studied for each component. CAD (Computer Aided Design) models for both components are created and analyzed with FEM (Finite Element Method).

This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.

The market-leading wage and PA-.system for the Swedish public sector Palasso is developed in Karlstad. In order to achieve the highest quality of code , the developing team behind Palasso has been conducting extensive testing. Testing is done to ensure that the software does what it should do. However, the testing has been done at a high level. In order to continue to evolve, the group that develops Palasso has started to look at the new development methods that have become popular in the computer industry in recent years.

Uvån Hagfors Teknologi AB (UHT) has developed a process ? GRANSHOT® ? for quicksolidification of metals in water baths. In the process liquid metal is splintered ? granulated ?into small drops. The drops are rapidly cooled in a water bath where all the heat energy from theliquid metal is transferred into the water.