På initiativ av Håkan Gerdin påbörjades utvecklingen av ett personaluthyrningsprogram, eftersom han en lång tid saknat ett program med denna specifika inriktning. Detta startade sommaren 2002 genom ett examensarbete med väl genomfört förarbete och utformning av programmets design. Programmet fick även namnet GOE!. Under hösten samma år gjordes ännu ett examensarbete som bestod av att realisera större delen av GOE!. Då det fortfarande saknades funktioner och manual erbjöd jag mig att göra delar av detta arbete som sedan inleddes i början av 2003.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The purpose of this thesis was to examine if there where fallacies in the design solutions for the business system IFS Applications from a user perspective, and if so, correct these from a cognitive science approach.Data collection consisted of three main portions. These where; workshop, individual interviews and observations. The collected data was analyzed and resulted in identification of two main areas in the application that where found lacking.The result of the study showed that the usability for processing large amounts of data and the lack of customization where the main flaws in the application. Two low fidelity prototypes where created with the purpose of rectifying the underlying flawed design solutions that where identified from the collected data..

Formgivningsprocess för en multimediamöbel...

Previous research has confirmed that the ability to repeat non-words has a close connection to a child?s language acquisition (Adams & Gathercole, 2000; Gray, 2003; Sahlén, Reuterskiöld-Wagner, Nettelbladt & Radeborg, 1999). It is also known that a repetition task is aided if the word is well known to the child (Roy & Chiat, 2004; Sahlén, m.fl., 1999). A relatively under-investigated area is that of the influence of prosodic variables on repetition of words and non-words.In the current study, 44 Swedish children between the ages of four and six years with typical language development were tested regarding word- and non-word repetition abilities. The words and non-words were matched based on stress, tonal word accent and number of syllables.

The topic of our thesis is Packaging Design as a Brand Building Tool and we are presenting the Scandinavian perspective. We found the topic interesting because, from a theoretical point of view, we identified a scarcity in research focusing on packaging design as a brand management tool, and from a practical point of view, we found out that businesses use packaging design at different levels in their communication efforts. Thus we wanted to provide both academia and business world with a clear picture to what extent and how businesses use packaging design in their brand-building process. Therefore the aim of our thesis is to provide practitioners and academicians alike with a better understanding of how packaging design can be used to create strong brands in the FMCG sector in the Scandinavian market. To reach the stated aim first we provided a solid theoretical background of packaging, its elements and its role in the marketing mix.

Denna rapport redovisar utvecklingen av en interaktiv e-bok med Apples program iBooks Author. E-boken, omna?mnd som Retail Tour iBook, a?r avsedd fo?r anva?ndande pa? Apples iPads och har skapats pa? uppdrag av fo?retaget River Cresco AB fo?r deras kund Nike. Den interaktiva e-boken besta?lldes av Nike fo?r att anva?ndas vid ett a?terkommande internt mo?te som behandlar a?terfo?rsa?ljningen av Nike-produkter i Stockholm.

This Master Thesis has been conducted as an assignment of the Swedish Defence MaterialAdministration and the Swedish Armed Forces and aims to examine the Target Location Error(TLE) of a Forward Observer System. The targeting accuracy of the system is vital if the systemis to be used as a sensor for precision munitions. The analyzed system, EOI (FOI 2000), wasdelivered to the Swedish Armed Forces in 2007. The targeting sequence starts with deciding theposition of the system with a GPS-receiver, continues with methods where the north direction issettled and ends by measuring the distance, direction and elevation to the target. When allparameters have been measured the system calculates the position of the target.

Idag besöker vi inte längre webbplatser enbart via datorer, utan även mobiltelefoner och surfplattor. För att göra interaktionen på en webbplats användbar via flera olika plattformar blir det allt vanligare med responsiv anpassning. Denna utveckling ställer högre krav på den grafiska formgivaren som bör ha god kunskap om de plattformar som designen tillämpas på för att nå högsta möjliga användbarhet. En grafisk formgivare ska alltså förstå vad användbarhet innebär och hur denna kunskap ska tillämpas i designen. Kandidatarbetet undersöker vad som definierar användbarhet och vad grafisk design bidrar till i skapandet av responsiva webbplatser.

Under 70-talet introducerades Positron Emissions Tomografi (PET) och på tidigt 90-tal påbörjades en planering av att kombinera PET och CT utrustning i samma hölje. PET är en metod som avbildar funktioner i människokroppen och CT, som står för computed tomografi (datortomografi) ger snittbilder av patientens anatomi. Detta ger på så vis en bild av både anatomin och funktionen. Det ger mycket viktigt information för diagnostik och planeringen av patientens behandling. Mycket förenklat kan man säga att en PET-CT undersökning går till så att det radioaktivt märkta ämnet, spårsubstansen, till exempel FDG injiceras intravenöst och sedan avläser kameran hur sockret tas upp i vävnaden.

As a project in advertising and graphic design the goal was to create a print campaign and a new logo for the train ticket Interrail. The project started with research, in which target groups were analyzed and defined, arguments for the campaign was decided and someguiding values for the logo were defined. After the research came the creative part, ideas for the campaign was decided and executed and a logo was drawn. The projects final result was three print ads and a logo..

?The language of management is money?, har någon sagt. I affärslivet gäller det att veta vilka åtgärder som lönar sig. Vi har i vår uppsats fokus på design som en strategisk resurs; skapande av mervärde. Kunskapsbaserade tillgångar, är mycket viktiga för företagens framgång i dagens hårda konkurrenssituation.

?A designer rarely works alone?. The first sentence of Jonas Löwgren and Erik Stolterman's chapter on design as a social process made me curious. What if a designer worked alone? What are the actual differences between working on a project alone and as part of a group? How would it influence the creative process? What would be different when coming up with ideas, meeting with clients and setting deadlines? Does the influence of another designer stifle the individual creativity or does it actually nurish it? This paper is written to answer these and other questions as well as take you through the creative process of the production of ?Daddy? - the music video..

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.