AbstractIntroductionWedged shoe insoles are used as a treatment for different problems in order to change the ground reaction force. They can secondary cause different loading patterns under the foot compared to normal. No previous study has, to the author?s knowledge, clinically evaluated the plantar foot pressure with different full-length wedges in normal persons.PurposeThe purpose was to evaluate the plantar pressure with different degrees of full-length wedges in normal persons.MethodTwenty persons with normal feet have participated in this single blind study. Wedges were produced clinically in four different shapes, 3° valgus, 0° flat, 3° varus och 6° varus.

This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the mass flow of the material being tipped.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

Holmen Skog has in some places in their operation area access to timber trucks with centre mounted scrapers. They make transportation more flexible and reduce reliance on contractors for road maintenance. The trucks with centre mounted scrapers have a higher tare weight, making them less productive and therefore they receive compensation with a 0.75 % increase on transportation price. The purpose of this study was to investigate what actions a timber truck with centre mounted scraper can perform with acceptable quality in winter, and to examine if it is an economically profitable solution for the truck operator and charterer. The study was done in three stages; interviews, performance analysis of the transportations carried out and an economic analysis with the help of Sven Erik Gilles spreadsheet tool. The study included the districts Delsbo and Hudiksvall.

Construction and maintenance of forest truck roads are a necessary element of industrial forestry. Payment for contracting services in this context can be done according to a number of payment models. This study will focus on the methods and consequences associated with a change of Holmen Skog?s payment model from per hour to per metric ton for ballast hauling. The aim of this study is to improve the economic efficiency of Holmen Skog?s ballast hauling in construction and maintenance of forest truck roads. This is done by formulating and evaluating a proposal for a payment model based on crowns per ton.

Boliden Mineral Ab's mine in Garpenberg, Dalarna is going through a massiveexpansion. The annual ore production is being increased from 1,4 million tons to 2,5million tons in less than two years period of time. Along this expansion thedepartment of mining techniques is administrating a project of optimizing the shortterm planning for the mining production. Garpenberg have since mid 90s storedinformation from all mining processes in a database.The information consists of time data from all the different activities required in themining process, for example charging, blasting, loading etc. The database also containstime data of delays that are affecting the production.

This study investigates the role of yeast in green crop and its impact on the aerobic stability of silage. Fresh crop was collected from 15 farms in southern and middle parts of Sweden during the summer 2014; samples from the primary harvest was collected from eight farms and samples from the first regrowth harvest was collected from seven farms. The grass was ensiled in 1.7 l glass silos. After three months of ensiling, silos were opened and silages were stored aerobically for 10 days. Samples from both harvests were ensiled in completely airtight silos, but samples from the second harvest were also ensiled in slightly ventilated silos. Chemical analyses and yeast counts were performed for fresh crop and silage.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.

SAMMANFATTNING Uppskattningsvis transporteras 171 miljoner grisar inom EU varje år, varav ca 3,5 miljoner i Sverige. Grisarna kommer, under hela förloppet från förflyttningen från box i stallet till bedövningen i slakteriet, att utsättas för stressande moment. Orsakerna är bland annat omgrupperingar, nya miljöer, vibrationer i bilen samt, speciellt under sommaren, värmestress. Temperaturen i djurtransportbilen är en nyckelfaktor som dessutom kan förstärka effekten av andra stressorer. Lastning i höga temperaturer ökar risken för värmestress. Värmestress innebär att djuren får allt svårare att avge sin värme. Även den relativa luftfuktigheten har betydelse, framförallt vid temperaturer över 30°C. Det är ventilationen i transportbilen som ska transportera bort värme och fukt från bilen.

Water is vital for all life on earth. But it can also be dangerous, even fatal, if it is polluted water. 60 percent of child mortality can directly be deduced to dirty water. Not only developing countries are affected, even in the western world epidemics are breaking out by partake or bathing in dirty/polluted water.MIP, Molecularly Imprinted Polymers, is a biosensor technology that can provide faster and more reliable response than the current methods of water analysis. It is also cheaper and due to that more samples can be taken and analyzed.

The interest in horses and equestrian sport is constantly increasing, and so is the will in both riders and trainers to learn more about the effect the rider and its equipment have on the horse. The last twenty years, more and more studies have been performed were the horse and its kinematics have been in focus. The access to more advanced technology has made it possible to study areas, which earlier have been hard to reach. The knowledge about kinematics in the horse, and how riders and their equipment interact with the horse?s movement, is also of great interest to veterinarians in equine practice.

Handling, loading, transport time and unloading in connection to transport of farm animals affect animal welfare. Induced effects include both psychological and physiological stress responses in animals. The physiological parameters may be measured through blood analysis while behavioural changes often manifest themselves through increased vocalisation, escape attempts and apathy. Physiological parameters are additional parameters of importance when measuring animal stress responses. The handlers behavior during transport has been shown to have major impact on animal welfare and the quality of meat. Animal friendly handling and driving of animals create a more manageable work environment for the handlers. To further increase animal welfare in connection to transport, stables should be built with well adapted drift passage and ramps on the transport vehicle.

The need for roundwood transport capacity vary throughout the year. The need during a period is influenced mainly by the volume transported the period, the number of days during which transport can be carried out, seasonal variations in road conditions and the weight of the roundwood, and the origin of the wood (private forest owners/ forest companies). The need for transport capacity generally increase during the winter and in spring, after thawing. Lack of logging trucks combined with a lack of drivers for these trucks make it hard to hire extra help during periods of increased transport capacity needs. It is also very expensive to keep logging trucks for use only during these periods. In this thesis, two new concepts based on the partial transport by truck tractors have been examined, to find out the possibility for increased performance and flexibility.

Problem areaAlfa Laval is a world leading company in the heat transfers area and have the vision to continue to be that in the future as well. The company has a lot of press lines where the utilization is high and also has started to become old. Prognosis shows that there is an increased demand of heat exchanger in the future. This increased demand is not something that existing lines will manage. To build new lines cost a lot of money and take time so it is essential that new lines are correct from the start and not need to be rebuilt or a lot of time spent to trim it.GoalThe goal is to achieve 100% theoretical utilization of the press (the press shall press the amount of plates it is designed for).