Sökresultat:
2505 Uppsatser om Building examination - Sida 38 av 167
INDUSTRIALISERING AV FLERBOSTADSHUS
The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.
Kiyoakis flyktcirkel. En precisering av Yukio Mishimas roman Vårsnö
The reception and the study of the novel Spring Snow by Yukio Mishima has ? as always with the novels of Yukio Mishima ? focused on the writer himself according to his spectacular way of life and death. Opposite to the studies and the reception, this master thesis focuses on the novel itself by following two more or less hidden traces in the novel: the protagonist Kiyoaki and his attitude to responsibility and dreams. This examination deepens the novel, by showing how the mechanisms of its inherent complexity work. It has been made by freely applying Roland Barthes´ method ?rewriting the text?..
Hovjuvelerare W. A. Bolins AB företagsarkiv
This examination paper is an account for the author?s work to arrange and registrate the business archive and business records of court jeweller W. A. Bolin AB from 1916 until present day, and a part of the one-year Masters Programme in Archival Science at the University of Uppsala. Problems that have been encountered are treated, as well as motivations of the decisions made during the process.
Plusenergi och dess installationer : Kvarter Trettondagen
The latest thing in the area of environmental building today is energy-plus-house. The idea behind the energy-plus-house is to create a house that produces more energy than it consumes. To accomplish this, the house uses renewable energy, in this particular case solar energy. With the help from a proper construction and thoughtfully projected installations you can achieve a surplus of energy. The surplus energy can then be sold to the surrounding buildings and thereby conduce to a financial profit for the household.
Radon i betongkonstruktioner : - Kan det undvikas?
The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.
3D-byggnadsmodeller utifrån takkonstruktioner : Lagring, hantering och bearbetning
A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.
Den europeiska identiteten Vem är europé enligt EU?
The main purpose of this thesis is to examine how the European Union through the Directorate- General (DG) of Education and Culture, are calling forth a constructed sense of European identity amongst the citizens of the Union.It is a discourse analysis, which can be described in twofold. Firstly, it is a mapping of the European discourse; i.e. how the European Union defines the identity it seeks to mobilise. Secondly, it examines whether or not there are similarities in the European discourse of identity and the traditional nation-building discourse of national identity.According to this thesis a European identity is articulated in cultural terms, whereby its members are said to share the same values and a common cultural heritage.To bring the people of Europe closer together and to deepen awareness of their "common" history, the European Union encourages all manner of meetings and exchange schemes between Europeans. Although its goal is to develop a feeling of belonging to a shared culture, the EU is also keen to preserve the specific aspects of Europe's many cultures.
Optimering av Kettlebellstativ : Har ingen...
I got a request from Eleiko Sport AB regarding them needing help with trying to improve one of their products. The following examination project includes the principal- and primary construction reports within trying to make some improvements and optimizations on a stand for Kettle bells. I have in this project both made my own proposals to the stands legs, proposals on how to strengthen the shelf and also made an optimization of the original Kettle bell-stand. In this report, the project goes from idea to being built and analyzed in Catia, including the creation of drawings and material definition..
Tre metoder för diagnos av mastit i fält :
The objective of this work was to evaluate and compare three field methods for detection of mastitis, California Mastits Test (CMT), DeLaval cell counter DCC (DCC) and FMA2001 Farm Milk Analyzer (FMA2001). Furthermore, to investigate at what cell count level clinical symptoms of mastitis are seen, and finally to check if the clinical findings and cell counts could be related to bacteriological findings.
DCC and FMA2001 are new analytic instruments to be used on dairy farms for detection of mastitis. CMT has been a widely used cow-side-test of milk quality in mastitis control efforts, but it cannot be used for estimating cell counts in scientific studies or investigations.
Two hundred and eight quarter milk samples from 52 cows were analysed with DCC and CMT, and 168 of these samples with FMA2001. Microbiological examination was done on 38 milk samples with CMT scores of 4 and 5.
The Never Ending Story : En läroplansteoretisk studie om GY11-reformens påverkan ur ett lärarperspektiv
New national curriculums are issued in order to change the present state of the educational system in a nation. In 2011 the old curriculum, the Läroplanen för de frivilliga skolformerna (LPF94) was replaced by the Läroplan, examensmål och gymnasiegemensamma ämnen för gymnasieskola 2011 (GY11). As future teachers we are interested in how a new curriculum affects the work of teachers concerning planning, teaching and examination from the teacher?s point of view.We conducted interviews with five teachers working at upper secondary schools (16-19 year olds) in Kalmar county. Our theoretical framework is based on curriculum theory and concepts of Leonard Bernstein: framing and classification.
Koldioxidutsläpp vid vägbyggnad - en fallstudie med jämförelse av alternativa byggnadssätt
Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.
Erfarenhetsåterföring av konstruktionslösningar Optimal utformning av ett detaljbibliotek med standardiserade konstruktionslösningar
This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.
Från idé till verklighet - En klubblokal
Enköping?s Rugby Club has long lacked a bigger hall to gather their members in, where they can meet and socializes outside trainings and games. Thanks to Enköping?s municipality, The Swedish Inheritance Fund, Swedish Sports Confederation, sponsors and club members the clubhouse will be built out with additional 100 square meters.The project is planned in two phases of which phase one is the buildup of the new clubhouse and phase two is the renovation of the existing part. Phase one started with the first groundbreaking in December 2006 and was finished for the season 2007.
Vad är verklig kostnad per koplats? :
Purpose
There are almost infinite numbers of ways to build dairy farms in Sweden. When building a new free stall barn you have the possibility to affect both working environment and animal welfare for many years to come. The construction costs are influenced by which type of barn that is built and what functions it contains, for example one can predict that automatic milking systems are more expensive to integrate than milking parlours. But what is the real cost of today for the construction of free stall barns with milking centres and how is it affected by construction methods and functions? Is the labour time influenced by the building costs? These are some of the questions this report will try to answer.
Ett samarbete om samarbete
The following is an explorative work on various forms of collaboration. The core of our exploration revolves around the idea of co-operation as a tool for examination, a collective working method, the input/output within creative practices as well as a phenomena in its own right? It is however not ?simply? about collaboration, but rather places as much focus on a highly personal search for new working methods, new approaches towards research and on the development of our relationship to graphic design. From beginning to end, the entire project has become a work whereby the term ?we? has been more important than ?me? ? a well-functioning project with a common purpose: a collaboration, between us..