This report presents suggestions and recommendations on how to convert an old industrial building, built in 1958, to an office hotel. One of the main criteria was that the floor plan should be flexible. The building is situated at Jonsereds Fabriker and the study was conducted for Hantverkslokaler i Göteborg AB, the estate owner.The survey is initiated with study visits at various office hotels, together with studies of literature regarding office planning. One conclusion from the study visits is that meeting-places, where the different companies can meet and exchange ideas and services, are important. Another one, and probably the most important parameter when planning offices is that they should have windows.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

In the post-war era many European countries were recovering from the ravages of the bombings of the second world war destroying whole countries. Sweden being neutral was spared the destruction of war but instead we demolished almost as much housing all by ourselves. A social program was modeled to modernize the country and to drag the swedes out of poverty by building one million apartments in just ten years and demolishing the old, dilapidated working-class neighborhoods. The traumatic events of the demolition of large areas of both the central and the outskirts of most Swedish cities is still very much present in the collective memory of people today and the new modernistic districts are still paying the price of that, more than fifty years later. Today these modernistic districts are in need of repair, and they are often homes to groups alienated from society making their reputation even worse.

AbstractWe all have experience of dwelling, which means that everyone can have an opinion about the architecture of the dwelling. Today the building companies do not have time enough to investigate which architecture qualities their clientele ask for in their apartments. JM AB use to call their apartments ?generous city apartments?. But do these apartments fulfill the needs of their dwellers? And what would the apartments look like if they were designed according to the wishes of the dwellers? When JM AB get knowledge about the dwellers needs and wishes they can make even better apartments for their future customers.The purpose and the objective with this report are to draw up proposals for tenant owner flat.

The construction industry works today with a time limit, therefore it is important to have rational tools to improve the efficiency in the building process. That?s the reason for this report, where a standard for interior finishes has been developed for Sandvik. The standard for interior finishes is designed as a program for room functions and includes office space and sanitary areas. It is a proposal showing how Sandvik can design their premises in the future.

The overall purpose of this essay is to study in which degree the democratic model that is called participant democracy works in the Swedish municipalities. To achieve what I set out to do I will focus on a central political area in which the Swedish municipalities has sovereignty versus the state, in other words in an area where they rule themselves. That political area will then represent how well the participant democracy works in the Swedish municipalities. The research questions then becomes:Does the participant democracy at Swedish Municipality level work in a satisfying way?Does the participant democracy in a large Swedish Municipality in a central political area work?Does the participant democracy in a small Swedish Municipality in a central political area work?Are there similarities and differences between the municipalities?If so, how can that be explained?To answer these questions I will study documents regarding the planning and building area.

Uppsala like many other Swedish cities is affected by heavy housing shortage, in terms of too few existing flats and residents within the city limits. Every semester thousands of new students are facing the same problems of finding themselves adequate accommodation. The waiting lists for flats and student-dorms are getting longer for each year, and the situation is just getting worse. Simultaneously, Uppsala?s ambition is to increase its population and expand as a Swedish metropolitan, according to the Swedish governmental environment goals. This paper investigates and analyses the possibilities of expanding a city?s population by building high-rise buildings.

Som hjälpmedel inför projektering, byggande och fastighetsförvaltning finns ett antal verktyg för att kunna göra miljöbelastningsprofiler för byggnader. I denna rapport har två metoder använts för att göra en miljöbedömning av ett flerbostadshus. Metoderna är EcoEffect och Green Building Challenge. EcoEffect är en svensk miljövärderingsmetod för att mäta och värdera miljöpåverkan från en fastighet under en tänkt livscykel. I EcoEffect beskrivs miljöpåverkan som negativ påverkan på människors hälsa och ekosystem samt utarmning av naturresurser.Green Building Challenge är ett internationellt samarbete som startades 1996 med syfte att använda en gemensam värderingsstruktur för byggnader.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

This thesis focuses on how companies in the textile and clothing industry view or interpret the idea of corporate social responsibility. The purpose of the study is to create an understanding for how this view affects the dissemination and the implementation of the idea in the organization and what might be the effects on the organization of those processes. In order to identify any differences in how the view affected the processes I have studied the current discourse on CSR simultaneously with my theory and conducted a comparative case study of two Swedish clothing brands. The theory focuses on the diffusion of ideas and change management within organizations. My data shows that the two companies have different ways of interpreting CSR and that this indeed affects their dissemination of the idea in the organization.

In recent years, more and more people have started to live double lives. Blogs, Facebook, YouTube and Twitter have created conditions so that we increasingly live virtual lives on the Internet. The gathering of people in this way entails both risks and opportunities for businesses. This study aims to explain how the phenomenon of social media has affected trade and service companies in a marketing and communication perspective. The idea for the essay came to us after we had observed how different behaviors in companies? concerning social media could vary a lot, and how we felt that this affected our personal view of the brands.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

The purpose of this essay is to examine how the two Swedish municipalities, Sigtuna and Nyköping, work with marketing. The study has primarily focused on how these two municipalities worked, consciously or non-consciously, with lifestyle marketing and place marketing. The research-questions that this essay wants to answer are;What is lifestyle marketing and place marketing?Do municipalities use these types of marketing, and who is this marketing directed to?How and why does municipalities use lifestyle marketing and place marketing?To answer these questions, phone interviews were conducted with several important employees within the two municipalities. The results of this study show that the different municipalities have both been using lifestyle marketing, but on different levels, in Sigtuna, it was a strategic choice, whereas in Nyköping, it evolved by itself and was not a conscious choice.

Today automotive manufacturers are facing a crisis with increased pressure to strengthen their brands. To prevent declining results many automakers have chosen to extend its brand to other industries i.e. various forms of brand extensions. Automotive manufacturers have developed an international strategy for what merchandise to offer. The strategy has received an overall positive response, however, it does not apply well within the Swedish market where merchandise is sold in less quantity than abroad.