Syftet med den här uppsatsen är att åskådliggöra hur SAS Sverige AB:s turnaroundarbete i en hyperkonkurrens samt hur bolaget försökt återskapa lönsamhet med nya strategiska verktyg. För att kunna svara på vår frågeställning utgick vi från en branschanalys för att förklara orsakerna till att ett behov av turnaround uppstod. För att sedan analysera turnaroundarbetet användes klassiska teorier inom turnaround management. Den framtida nya strategin analyserades sedan utifrån Blue Ocean Strategy. Slutsatsen på rapporten konstaterar att den höga kostnadsbilden inom SAS bidrog till att krisen blev så omfattande.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

This is a study of the trade union journal for female blue collar women in Sweden, Arbetets Kvinnor, between 1927 and 1931. The purpose is to examine how a female trade union activist's constructs collective identity by those notions of social class, sex, and moral values that are articulated in the journal. The main theoretical basis is Alberto Melucci's analysis where he argues that a collective identity in social movements is made in an interaction between individuals, where the action possibilities and limits are defined. Another purpose is how the female blue collar worker's resistance and/or adaption to the male hegemonic trade union and the bourgeoisie hegemonic society are presented. The essay shows how the collective identity is made of both historical and contemporary images of the working class women as workers and trade union activists.

The study examines what affects loyal football supporter?s intentions to an array of behaviors that can generate revenues to the football clubs. Specifically the study shows that attitude towards the club affects the supporter?s intentions towards consuming products and services that in some way are related to the favorite club stronger than the satisfaction with the club. Furthermore, the study also shows that there are different kinds of attitudes that drive the intentions and that the strength of these drivers varies.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Petro-electric IFVs (Infantry fighting vehicles) or hybrid-IFV?s are not a new phenomenon. During the 1900?s Germany as well as the U.S both tested vehicles constructed with hybrid technology. In spite of several identified advantages, no serving hybrid-IFV exists today.

This report is the final part within our education, Industrial Organization and Economy focusing on Logistics and Management at Jönköping School of Engineering. The aim with this report is to coordinate recycle drives for deposited aluminum-cans and bottles collected from grocery stores within Jönköping county and locality.In the present situation both aluminum cans and bottles filled with drinks are distributed to the grocery stores by the brewery?s own distributers. At the same time as they supply the drinks they also discharge the grocery stores units with restored aluminumcans and bottles. To make it easier for the grocery stores to handle the goods in the future, all distribution of drinks ought to be directly delivered to the grocery stores own separate central warehouse.

Problem: Is the free cash flow a value relevant accounting measure in relation to the Swedish stock market?Objective: The aim is that by using an investment strategy to examine whether the free cash flow is an accounting measure that could be perceived as value relevant in relation to the Swedish stock market.Method: The paper is based on a quantitative survey of empirical evidence that has been collected from companies listed on the Large and Mid-Cap lists of the Swedish stock market.Theoretical Frame of reference: value relevance, cash flow, portfolio theory, drive theoryResults: It was concluded that the study results conform to the Finnish survey results. The portfolio shows higher returns than the OMX index..

The purpose of this thesis is to describe and analyze how the mining equipment producers on a global market manage to handle the changing conditions concerning customer value. Our approach has been a comparative analysis between two different sites in order to answer the purpose. The case studies at Metso Mining have been made through interviews and visits at two geographical markets, South America and Scandinavia. The theoretical framework applied on our empirical findings is based on Blue Ocean Strategy, Customer Value and Resourced Based View. The empirical foundation is based on interviews with Metso Mining employees at Sorocaba in Brazil and Kiruna/Gällivare, Trelleborg and Staffanstorp in Sweden.

Detta examensarbete reder ut arbetsprinciperna för olika typer av hårddiskskrivskydd; hårdvaruskrivskydd, mjukvaruskrivskydd, hybridskrivskydd och bygelskrivskydd. Slutsatsen av utredningen är att endast hårdvaruskrivskydd Detta examensarbete reder ut arbetsprinciperna för olika typer av hårddiskskrivskydd; hårdvaruskrivskydd, mjukvaruskrivskydd, hybridskrivskydd och bygelskrivskydd. Slutsatsen av utredningen är att endast hårdvaruskrivskydd bedöms ha tillräckligt pålitliga skyddsprinciper, vilket motiveras av dess oberoende från både hårdvara och operativsystem. Vidare undersöks hårdvaruskrivskyddet Image MASSter(TM) Drive Lock från Intelligent Computer Solutions (ICS). Några egentliga slutsatser gick inte dra av kretskonstruktionen, bortsett från att den är uppbyggd kring en FPGA (Xilinx Spartan-II, XC2S15) med tillhörande PROM (XC17S15APC).

Förord:Ämnet för mitt examensarbete var att arbeta med företagsidentitet genom att fläta samman ett specifikt företags (Löfstrands möbelrenoveringsverkstad) befintliga verksamhetsstruktur och ambition med planeringen och formgivningen av dess egenproducerade objekt.Löfstrands Verkstads vilja att skapa möbler som skall kunna ärvas vidare (likt de möbler de renovering i sin befintliga verksamhet) lades tillsammans med möjligheterna med småskalig produktion (i deras verkstad, samt kontaktnät) som grund till en verksamhetsbreddning för Löfstrands Verkstad i Hägersten.Den fysiskt manifesterade slutprodukten av examensarbetet är en möbelkollektion skapad för Löfstrands ideal, identitet, lager- och produktionsmöjligheter. En kollektion i vilken kunden bjuds in till medskapande (eller art directing) av möblerna för att knyta strarka band till dessa och verkstaden..

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

Qvarfordt, K (2014). Physical activity on prescription, the individual experience. Thesisin Public Health. School of Health and Work, University of Gävle.In order to increase physical activity and to create a better health licensed staff mayprescribe physical activity to patients. The purpose of this paper is to find out how fiveindividuals experienced getting Physical activity on Prescription, FaR ®.

The Government announced a new school reform which aims to support teacher appraisal and professionalism within the Swedish education system. The once well renowned profession is hurting by the decreasing quality of the Swedish education system and the declining number of applicants to the university teacher program. The school reform introduced a new career path for especially skilled teachers to an occupation earlier characterized by a homogenous work force. The Government encourages principals to promote thriving teachers to first teachers, whom will receive an increase in the salary covered by state aid. By supporting these effective teachers, the Government wishes to increase the image perceived and status of the profession and improve the competitiveness of teaching's salary.