Marinediesel has, to meet there customers needs for a suitable sterndrive to powerboats, developed a prototype. The prototype is currently in the testing phase. The opportunity to test the sterndrive under load inside the workshop has not previously been possible. Until now the drive has been tested in a test bench without any load on the propeller axle. The prototype has also been tested under real conditions mounted on a boat.The idea with my thesis was to create a test bench that can run around the clock in order to be able to test things like wear and service intervals and other things that require that the test interval is long.

Rapporten Designstudie av beställningsautomat -anpassad för drive through- behandlararbetet från produktutveckling till modellframställning. Den uppgift som gruppen tagit sig angäller utveckling och design av en automat anpassad för användning i en drive through. Helaarbetet är ett examensarbete inom Produkt och Processutveckling (kurskod: KN1060) vidInstitutionen för Design och Produktutveckling på Mälardalens högskola.Produktutvecklingen gäller en automat anpassad för användning i en drive through, iproduktutvecklingen ingår val av material, produktionsmetod, utformning samtkonceptmodeller. Arbetet har utförts med en funktionsanalys och intervjuer som grund.Utifrån dessa dokument har sedan flertalet koncept kunnat utvecklas. Med stöd av ett antalutvecklingsverktyg har ett urval kunnat göras för att slutligen mynna ut i ett enda slutgiltigtkoncept.Jämförelser och urval av koncept har genomförts med hjälp av ett antal utvecklingsverktyg;QFD-analys (Quality Function Deployment), FMEA-analys (Failure Mode Effect Analysis)och Pugh-matris.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

This master thesis concerns the occupational safetyenvironment at Outokompu Stainless, Avesta Work.The study is of a sociotechnical approach wherehumans are involved and interconnected in the samesystem with technology and organisation. In order toreach the corporation?s goal of zero accidents with losttime injury, the work of improving and maintainoccupational safety and health has to regard behaviourand cultural aspects. The aim of this study is todescribe the safety culture at a specific production unitand research what work which has to be done in orderto change and improve the safety culture at AvestaWork.There are several opportunities for improvementpointed out in this paper and here are some mainresults presented. First and foremost, the concern ofsafety among blue-collar is often secondary due toproduction.

The connection between fluorescence and color management still is a relatively unexplored area. Thefollowing composition analyses the theory that when printing on fluorescent ink jet paper using ICCprofilesa more yellow print will appear. In theory the ICC-profile compensate for blue light that fluorescefrom the paper with the complementary color, yellow. The human eye apprehands this fluorescentlight as white.When categorizing a number of ink jet qualities some tests to indicate change of color in the final printwere made. Five qualities were chosen for further analyses, each with different white point.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Många företag som utvecklar en webb-applikation försäkrar regelbundet med olika testmetoder att de har en fungerande produkt. Ändå dröjer ofta leverans till kund och slutanvändare. Här beskrivs en lyckad implementation av hur leverans regelbundet kan ske till en molntjänst med ett så kallat blue green pattern som gör att applikationen kan uppdateras med minimal påverkan för slutanvändaren. Lösningen består i att webb-applikationenkan driftsättas i två olika miljöer och att användare alltid, via en html-sida som fungerar som en trafikriktare, skickas till den miljö som har den senaste versionen av applikationen. Genom ett script driftsätts den nya applikationen på den miljö som för tillfället inte har några besökare.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

SEP Modular Armoured Tactical System is the next generation of military vehicles developedby BAE Systems Hägglunds AB. At present time, BAE Systems Hägglunds AB aredeveloping a 6-wheel electrical hybrid and a conventional 8-wheel vehicle. The questionformulation was summarized as: ?In which ways can the electrical transmission in a hybriddriveline for SEP be designed, when the surrounding fixed interfaces are kept and the unity ofcomponents within SEP is maximized??. The purpose of this master thesis was to study avariety of concepts for hybrid propulsion.