Bakgrund: Trots allmänna råd och riktlinjer råder stor brist på nutritionskunskaperna inom hälso- och sjukvården i hela Europa. Många äldre riskerar att drabbas av undernäring och får ett minskat välbefinnande och en för tidig död. Genom att arbeta med att personanpassa kosten kan patienten få bli aktiv i egna beslut som påverkar dennes liv och hälsa. Syfte: Syftet med studien var att belysa omvårdnadspersonalens erfarenheter av kost som ges personanpassad på ett korttidsboende för äldre. Metod: I denna studie användes induktiv ansats där datamaterialet analyserades med kvalitativ innehållsanalys. Sex omvårdnadspersonal intervjuades på ett korttidsboende för äldre i södra Sverige. Resultat: Ur analysen av datamaterialet fyra kategorier; utgår från patientens syn på situationen, möjliggör val, möjligheter i måltidsmiljö, begränsningar i arbetsmiljön med åtta underkategorier.

Examensarbetet som utförts på Institutionen för Maskinteknik vid Blekinge Tekniska Högskola i samarbete med Kockums AB har benämningen ? Upphängningssystem?. Dagens upphängning av rör, ventilationsrör och kabelbanor består av ett antal olika singelupphängningar utan större samordning. Detta har gjort att Kockums AB önskat få fram ett samordnat upphängningssystem som klarar av alla dessa upphängningstyper. Utifrån denna problemställning har vi arbetat oss fram till ett upphängningssystem bestående av ett multisystem och ett flertal singelupphängningar för rör, kabelbanor och ventilation.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.

The objective of this work was to introduce measures to reduce energy and water demand at Gävle Söder 17:10. To succeed, this energy audit has been made. The work is based on collected statistics from the property owner Norrporten, measurements, literature review and through consultation with experts in the field. Two models, one for each building, have been created in the simulation program BV2 to estimate the potential of energy measures based on the collected information. The models in BV2 have been verified against the statistics of the energy consumption.With the help of calculations and simulations, seven cost-effective measures have been identified.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

SammanfattningExamensarbetets syfte är att ge en övergripande bild om vad BIM egentligen är och hur arbetsmetoden ska kunna påverka byggprocessen positivt. Rapporten fokuserar på anläggningsbranschen och då främst från en projektörs perspektiv. Ett projekteringsexempel visar även på hur en anläggningsmodell kan skapas med hjälp av en programvara som stödjer arbetsflöden i BIM.BIM kan utläsas Building Information Model och avser då den eller de modeller som utgör en digital objektbaserad representation av en byggnad eller en anläggning. BIM kan även utläsas Building Information Modeling och avser då ett arbetssätt, d.v.s. processen att skapa och använda en eller flera byggnadsinformationsmodeller i bygg- eller anläggningsprocessen.Det finns många fördelar med att använda BIM, inte bara i husbyggnad utan även i anläggningsbranschen.

Rotskärsskolan is located in Skutskär, Älvkarleby municipality and the school conducted today consists of lower secondary. The school was built in the early 1960s and contains three buildings. Today there is a great need for reconstruction of Rotskärsskolan, when the premises are worn out and not suitable for today's education. It must therefore be a phased change involving all the school buildings, starting in the winter of 2008/2009.Our degree project involves one of these buildings, called house F. This building will, by a recent decision, be adjusted for classes from preschool up to grade five, special school and leisure activities when some of the municipality's schools will consolidate.

A stay in the neonatal intensive care unit of greater than 5 days is one of the identified risks ofa sensorineural hearing loss. Preterm infants usually have at least one risk factor for hearingimpairment. The period from 25 weeks' gestation to 5 to 6 months of age is most critical tothe development of the auditory system. We think it is important to investigate hearingimpariment among infants born preterm, degree and type of hearing loss, risk factorsassociated with hearing loss and how the auditory system may be affected by preterm birth.ObjectiveA critical review of the current literature including studies of preterm infants born betweengestonal age 25-37. Our aim is to identify the most common type and degree of hearing lossamong infants born preterm and if there is an association between hearing loss and pretermbirth.MethodA literature search of Scopus and Pubmed resulted in 16 articles from 2000-2015ResultsMost of the infants in this study had a severe to profound sensorineural hearing loss.

The tribo system ice-curling stone was investigated in order to understand the mechanisms behind the stones' behavior on the ice sheet. The problem with non-identical stones should also be addressed.The stone curls, that is, its sliding path deviates from a straight line to the right for a clock-wise rotation and to the left for a anti-clock-wise rotation. Several mechanisms to explain this behavior have been proposed over the years but none has been successful.By carrying out experiments at the local curling rink and studying silicon castings of ice- and stone-surfaces with scanning electron microscopy and vertical scanning interferometry, it has been decided that the curl is not due to dry friction, ice-debris or the difference in friction on the left and right side of the stone. The side force comes from the fact that the friction is higher at the back of the stone than at the front.The contact between stone and ice is never completely dry, nor in the hydrodynamic lubrication regime. It is probably a combination of hydrodynamic lubrication and a contribution from mechanical scratching of the ice.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

This report covers the thesis done by mechanical engineering at the engineering program at the University of Halmstad. Student Work Development of packaging in the food industry includes 15 credits and has performed over 20 weeks in spring 2009. The thesis work is a compulsory part of education and aimed at the student must apply the knowledge it has given during training in a project related to reality. Student work has been carried out in cooperation with Hanson & Möhringen AB and the project's main objective was to develop an environmentally friendly packaging to their brand Falk Salt. When salt is one of the world's cheapest commodity was packing all the costs have to be as low as possible.

A helicopter based system equipped with a millimetre-wave fire control radar is studied for improvement of the detection probability for moving ground targets. The system is a pulse doppler radar that sends out the electromagnetic wave in repetitive pulses. The frequency in which radar sends this pulse is called Pulse Repetition Frequency (PRF). The velocity of the moving targets is measured by spectral analysis of the pulses received. With this sort of system some targets will not be possible to detect.