Bakgrund: Många av patienterna på en neurointensivvårdsavdelning (NIVA) vårdas med respirator under en längre eller kortare period av vårdtiden. Neurointensivvårdspatienterna bedöms ibland utifrån de kriterier för urträning och extubering som används på allmänna intensivvårdspatienter. Detta kan leda till för tidig extubation med reintubation som följd. Syfte: Redogöra för vilka kriterier som ska bedömas hos neurointensivvårdspatienter inför en extubering. Metod: Litteraturstudie.

This thesis is done in cooperation with SWECO Energuide in Växjö. They have been assigned by SKB in Oskarshamn to renew their electrical power supply and the ancillary processing systems in their Central provisional storage of spent nuclear fuel, CLAB. Today in the CLAB facility, the spent fuel is cooled down with water pumps, driven by asynchronous induction motors, where the water is regulated by mechanical valves to the desired flow. After the upgrade, the engines will be powered by AC drives that can control the pumps by changing the rotational speed and thus change the water's cooling effect on the nuclear fuel. In this study, I investigated the interference AC drives causes the feeding network and how to go about averting them.

Foreign invested SMEs have recently become increasingly interested in China. The enterprises are in this report categorized as second wave companies since they follow the footsteps of previous pioneers, of which mostly were larger companies. The ambitions of the SMEs are either to sell products on the ever expanding Chinese market or to utilize the potential of low cost production for global markets. The existing literature is fragmented and solely based on the experience of larger companies. We believe that SMEs are facing new and different challenges, and thus a new generic theoretical frame work is desirable.

I samhället Hults Bruk ligger en nedlagd brukshandel, från 1951, som idag fungerar som samlingslokal för de boende i området. Holmen Skog, som äger alla fastigheter i området, planerar nu för en ombyggnation av den gamla brukshandeln till familjebostad. Vår uppgift var att utforma ett planlösninsförslag anpassat till en tvåbarnsfamilj för den aktuella byggnaden. Utöver detta skulle vi även upprätta rumsbeskrivning och köksuppställning samt ge förslag på ledningsdragningar, tomtutformning och källarplanlösning. Holmen hade vissa krav och önskemål för ombyggnationen.

Syftet med denna studie är att undersöka vilka likheter och skillnader i undervisningen som finns mellan en grundsärskoleklass och en grundskoleklass. Undersökningens metod är strukturerade observationer genomförda av två observatörer i en grundskoleklass och i en särskoleklass på samma skola. Olika aspekter av undervisningen observerades, av vilka några kan anses utgöra förutsättningar för en inkluderande undervisning. Dessa är: samarbete mellan pedagoger i undervisningen, ledarskapsmodeller, cooperativt lärande (samarbetsinlärning), dynamisk pedagogik samt samarbete mellan pedagoger i problemlösande undervisning. Resultatet visar på likhet mellan de båda skolformerna beträffande användandet av en organismisk modell med ett demokratiskt ledarskap, där grundsärskolans pedagoger endast använder det aningen mer frekvent än grundskolans pedagoger.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Mechanical harvesting may result in timber damages leading to reduced saw log quality. The initiator of this study was VIDA ? a privately owned concern operating in the value-adding process industry of forest raw materials. The aim of this study was to examine the type and amount of damages on Alvestakubb caused by the harvester head during the cutting process. The aim was also to compare the damages caused by different types of feed rollers and to evaluate the effects of temperature on damage occurrence.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.