This report is the final result of the master thesis that have been done at  Sharpman Engineering. Sharpman Engineering is a small development and manufacturing company that produces and make drawings for everything from heavy duty log raft to aids for disabled people. The purpose have been to make one concept that make it easy for elderly and people having problem with knee- and back problem to stand up from a sitting position. The final result will the company have for further investigations and use for a pre-serial production with the goal to produce a new working product.To get an overview of what is on the market have a comprehensive survey has been done, followed by a survey on patent. This patent survey are for no intrusion on existing patents should occur and give new ideas.

To be able to protect themselves from credit risk, the banks must constantly check the performance of  the companies they have lent money to. There are many mathematical models for predicting financial distress. These models use accounting-based ratios, which often are historical and not representative for the present situation. This study describes how the banks do in practice to find signals of insolvency in time and the variables they are observing for doing that.In addition to financial reports which the company sends in to the bank at least once a year, also the relationship between them and information from different information  agencies are of great importance to track  signals of insolvency. Poor profitability is the primary cause of insolvency.

Archaeological findings show that ski manufacturing goes back thousands of years in the Nordic region. There is a wealth of literature and film that deals with the subject, but it can be difficult to get an overall picture of how a specific type of traditional ski has been made. The starting point is the documentary "Skidmakaren i Gielas", where the viewer can follow Alfred Israelsson as he makes a pair of skis out of birch wood. However, the documentary lacks important information about how the skis are actually manufactured. Length, width and certain working steps are disclosed.

Introduction: More and more companies have realized that keeping and using the knowledge in their companies is getting more important to get or keep a competitive advantage. The companies? organizational culture and knowledge management are essential to create knowledge transfer. Also that the employees and the leaders of the company knows how knowledge- and information transfer arknkoe done best for them. That is why we chose our purpose to be:The aim is to understand the differences between managers and employees perception about knowledge- and information transfer in a manufacturing company.

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

The project was carried out with SwedSafe AB, engaged in hearing and manufacture of earplugs. Since the company is a world leader in the sale of these products, it is important that they keep a higher level of quality of these products.Production of earplugs is currently a automated manufacturing process that is divided into four conveyor belts and one of the conveyor belts is what will be affected in the project. The belt affected during this process is exposed to various elements such as filling, closing, fermentation and extraction of products. Because the belt gets dirty, degraded products and the work environment is affected. To increase the quality of products and improve the working environment requires an automatic cleaning process, which collects dirt from the belt.The aim of the project is to design a machine that prevents the belt from becoming dirty, preserve molds clean and improve the working environment without disrupting production.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

Having a functioning internal communication is necessary for the survival and existence of every company. Traditional communication channels are for example meetings, noteboards and personnel newspapers. During the last ten years we have witnessed an explosion of new channels, who are based on information technology. IT is a natural part in new IT-companies, like Framfab and Icon Medialab, but what role does IT have in a large, manufacturing company with a long history? The purpose with this thesis is to investigate how IT has influenced the internal communication in a company.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

This thesis work has been performed at Volvo Aero Corporation in Trollhättan, at the department of ?hot structures? involving aircraft engine GP7000. The purpose with the study was to investigate the possibility to reduce size of the forging of flanges on the rear turbine frame when purchasing. Thereto examine the parameters that affect the flanges motion during the manufacturing process. The goal was to provide Volvo Aero with foundation to later bring in slimmed forgings.

AbstractOutsourcing is a business strategy that has developed over the last 40 years. Outsourcing means to let another company do some activity within the company, for example production.The thesis for this paper is: How is outsourcing used in a manufacturing company today and how is the resource efficiency affected by it? The research is divided into two parts, a theoretical part and an empirical part. The theoretical part consists of a study of literature. The works in this study is books, text books, bachelor thesis paper and scientific articles.

AbstractThis qualitative study has been made to examine which factors that are required to create a work place that can be associated with loyal co-workers. The study covers half structured interviews with nine people on different levels and with different positions, within a manufacturing company in Värmland. Our ambition with this study is to find out if, and if so, in what way the view on loyalty and which factors that are required to encourage loyalty, differ depending on witch level one belongs to in the organization. Our thesis is that our respondents will have various ways of expressing the term loyalty, and that these various ways are linked to the different levels that each employee is currently stationed at.The result of this study shows that the way people look at loyalty, and what loyalty is really about, does not differ that much among our respondents, regardless of their level. The factors that, according to the respondents, are important if one wants to create a work place that can be associated with loyal co-workers are: to be able to feel trust towards and have faith in those one works with, as well as the company and the way things are being run, to be able to experience the feeling of community, and that one is happy with ones work place, as well as ones co-workers.

This Master Thesis is a product development project that has been carried out in cooperation withLappset Sweden AB.The purpose has been to develop a group of products suited for parks andtraditional playground locations. The specific target area has been courtyards of newly builtresidential areas. (These pieces of open land resemble glades that can be found in the forest,which in Swedish is called ?gläntan? and has given name to the product family). Therefore thedesign should match contemporary architecture.

The purpose of this study is to achieve an understanding of how a CE- marking process is conducted and to identify the relevant factors that must be considered in such a process. We have conducted our study at Lo?vhults Svets & Smide AB (Lo?vhults) in Skruv, Sma?land Sweden, which are manufacturing brackets for small covering constructions.To understand how a CE-marking process is conducted several documents and provisions have been reviewed to achieve a basic understanding and insight of the subject. It thus led to that guideline ETAG 015 were studied and the factors to be considered in the CE-marking of brackets were identified. Together with Jan-A?ke Johansson at Lo?vhults we agreed on four different brackets to investigate for a potential CE-marking.