This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

The cost for forestry logistics in Sweden is about 25 percent of the total cost of getting the raw material to industry (Anon., 2010). There might be much to gain by taking a look at your supply chains on the logistic side in your company. In this report the logistic chains by Mellanskog for ENA Energi AB in Enköping has been looked in to. ENA Energis plant is a combined power and heating plant and about 99, 5 percent of their fuel consisted of bio energy in year 2009 (ENA Energi, 2011, länk A). The main purpose with this report is to look at three questions: 1. How does the supply chain look today? From forest to industry. 2.

A large part of Sweden?s green, urban landscape is covered by lawns. Approximately 80 000 ha of maintained grass lawns are part of public courtyards, schoolyards, parks, golf courses, sport fields and traffic environments. Beyond this figure, the lawn is also an essential element in most private villa-gardens. Lawns have become a universal phenomenon through the dispersion of landscape aesthetics from the Western world.

This bachelor thesis argues for consumers' views on origin labeling effect and their willingness to pay for goods with this kind of label. The purpose of this study is to analyze the factors that influence and to measure willingness to pay for a national origin labeled product previously only competeing with a less expensive conventional product, when a further regional product is introduced in the purchasing decisions of consumers. This is achieved by testing whether Simonson's (1989) theory of the compromise effect is applicable to increase consumers' willingness to pay for eco-labeled food products. The factors affecting the willingness to pay; trust in eco- label, opinions about the products of their own nation and the surrounding region. Furthermore presents theory about what underlying the consumer consumption choices.In order to achieve credible results 240 respondents have participated in a questionnaire survey.

Disinfection methods for drinking-water produced at the two water works of Stockholm Water Co are compared in this study. Three different nethods are compared; disinfection with chlorine gas, disinfection with sodium hypochlorite and disinfection with UV-light and monochloramine. The method used is Life cycle assessment, LCA. LCA is defined as the compilation and evaluation of the inputs, outputs and potential environmental impact of a product system shroughout its life cycle. The environmental burden is compared for the three different disinfection methods.

The Swedish government has set up the overall goal that no net emissions of greenhouse gases can occur after 2050. A sub-target has been developed for road transports which states that the use of fossil fuels must be reduced with 80% to 2030 in order to be completely abolished to 2050. A public inquiry mapping how this can be achieved was handed in to the government late in 2013. The use of alternative fuels for road transport, both biofuels and electricity, is expected to give the biggest contribution to the reduction of the use of fossil fuels. The inquiry sets up a number of goals for how much the use of alternative fuels must increase to 2030 in order to reach the overall goal and which instruments that are needed in order to do so.The aim of this thesis is to evaluate how these goals can be reached and what the most likely obstacles that may hinder the reaching of these goals may be.

?Childs pedagogic material ? A qualitative study of child?s use of pedagogic materials available at five nursery schools and about their teachers thoughts about the display of the pedagogic material?In the nursery preschool the environment and the educational materials have always had a central place. That's why it has been chosen to study and observe five preschools and interview sex teachers, in an attempt to understand the teachers thought about the choice of material and the choices of material that the children used. The reason I do this is to see what the underlying idea about the materials the children use is, and why educators choose to make certain materials visible. The purpose of this study is to examine the educational materials that are used to stimulate children´s learning and examine what determines the choice of educational materials.

This study takes place within a publicly owned art producing organization and dwells on the problems of a change process that the organization was involved in. Both leaders and staff were disappointed by the way the change process had developed. The management team explained the outcome by referring to the uniqueness of working with artists who constantly put their own personal objectives before the benefit of the whole. The aim of this study is to find a complementary explanation to the one the management team provided us with; an explanation that can help in the understanding of the dynamics of a change process. Can perhaps theories on information, communication and change processes give an alternative explanation to why the change process faltered? To investigate this, we have used a qualitative single case study.

Sammanfattning:Syfte och frågeställningarSyftet med denna undersökning är att undersöka vilka material/ hjälpmedel som används för att hjälpa barnen med koncentrationssvårigheter i förskolorna och att undersöka vilka för- och nackdelar pedagogerna ser med materialet/ hjälpmedel.MetodFör att undersöka vilka material/verktyg som finns i verksamheterna gjordes en webbenkät.Webbenkäten korsanalyserades med en intervju som gjordes i en särskoleverksamhet.ResultatResultatet av enkäten visade att pedagogerna använde olika färdiga material samt egenutvecklat material. Det positiva som framkom var att alla barn oavsett behov gynnades av att arbeta med materialet. Det negativa var att pedagogerna ansåg att de hade för lite schemalagd tid att leta efter passande material.Betydelse för läraryrketMin förhoppning är att denna undersökning ska hjälpa pedagoger i förskoleverksamheter med att lättare kunna söka passande material till barngrupperna. Min förhoppning är också att ge pedagoger en liten fingervisning om var de kan finna information gällande hjälpmedel för barn med behov..

Vi har genom intervjuer och klassrumsobservationer undersökt hur tre pedagoger i grundskolans tidigare år använder elevernas erfarenheter från sin vardag i matematikundervisningen, varför pedagogerna undervisar som de gör samt vad de använder för material i sin undervisning..

Syftet med vår undersökning är att ta reda på hur och om barn och pedagoger använder tredimensionella material på två förskolor. Vårt intresse för skapande material uppstod då vi gick sidoämneskursen Det tredimensionella konstruerade arbetet inom slöjd/hantverk, då vi själv fick arbeta och bekanta oss med tredimensionella material. Genom våra diskussioner inom ämnet blev vi intresserade av att ta reda på om dessa material fanns ute på förskolorna. För att ta reda på detta gjorde vi en undersökning med kvalitativa observationer och intervjuer med åtta barn och fyra pedagoger. Vi stödjer oss främst på Granbergs, Tragetons och Vygotskijs teorier och forskning om skapande verksamhet. Vår slutsats är att tredimensionella material finns ute på förskolorna, men att de sällan används.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

In January 2005 large forest areas in south Sweden were severely damaged by storm. This final thesis describes the work with creating an ecological and landscape-adapted regeneration plan for a severely storm damaged property in Kronobergs region in south Sweden. This regeneration plan, in difference to more regular plans, are focusing more on the owner?s use and goal?s for the property and seeing the property from a more comprehensive view in the regeneration process. Beside production and environmental values the plan also take in consideration other values as aesthetic, culture history, landscape picture and recreation values.

Sustainability and the traffics impact on the environment have become increasingly central within spatial planning. For many years, planning has been focusing on building new roads - this has resulted in increased use of automobiles, which many believe is unsustainable in the longer term. Therefore, authorities at national, regional and local level want to increase the use of alternative transport modes ? such as walking, cycling and traveling by bus.The thesis intends to study if the Municipality of Umeå?s policies for sustainable development have led to an increased use of public transportation. The use of public transport in Umeå is also compared with developments at national level, in order to see if there are differences in the level and trend.

Våta kopplingar används i automatiska transmissioner för att överföra vridmoment. De primära komponenterna i en våt koppling är de oljesmorda pappersbaserade friktionslamellerna och separationslamellerna gjorda av stål. Volvo Construction Equipment (Volvo CE) utvecklar och bygger automatiska powershifttransmissioner med våta kopplingar till sina anläggningsmaskiner. Volvo CE och Luleå Tekniska Universitet (LTU) bedriver tillsammans forskning om våta kopplingar som involverar pappersbaserade friktionsmaterial. De två vanligast förekommande materialen i produktion, i detta examensarbete benämnda som material A och B, testades i en testrigg på LTU.