Norconsult AB has developed a solarhousing concept, a house designed for the warm climate in the Middle East andwith large quantities of solar panels installed. The cooling system for the house was designed in an earlier report, the purpose of this thesis is to investigate the possibility of short and long term storage of thermal energy via an underground energy storage volume.Two different designs of the storage and three different filling materials have been integrated into a model to simulate different cases. The first design consisted of pipes installed in the ground, without insulation. The second design consisted of an insulated concrete box installed to prevent thermal energy from the surrounding soil to flow towards the lower temperature regions within the storage. The three different filling materials were dry saudi sand, water saturated saudi sand and the filling material used by the client for energy storage in Sweden.The results from the simulations show that neither of the designs, regardless of the filling material, managed to extract enough thermal energy from the house to the ground to uphold the demands of indoor climate.

To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

The aim of this thesis is to map the current internal information flow at Volvo Uddevalla, to detect obstacles in the flow and to find out how these obstacles can be avoided. The aim is also to describe how a corporation, in this particular case Volvo Uddevalla, creates knowledge and use information. The study is performed in order to create a base for the coming implementation of a new information standard. The method used is conducting an information audit investigating the current management of documentation according to the changes that have to be made to carry out the claims from the standard. The investigation is made by way of interviews with 16 of the employees at Volvo Uddevalla.

Koloni is a concert promoter that put up shows in lots of different locationswith a wide variety of music styles and artistic expressions. In this work I havecollected material from Koloni?s nine years of existence to form a volume. Thevolume tells the story of Koloni?s work, but also shed some light and understandingon the alternative cultural scene of today.

Navigation är ett centralt begrepp i spelanvändning, trots att det ofta ses som ett nödvändigt ont. Det här arbetet intresserar sig för upplevelsen av navigation i två typer av programvara ? spel och nyttoprogram. Detta arbete går ut på att granska hur upplevelsen av navigation i programvara är beroende på användarnas förväntningar ? om användarna tror sig använda programvara för nytta eller för nöje.

In industry applications, such as power supply plants, the issue of interaction between fluid and structure is always presented. More precisely, the fluid flow affects the structure by applying force(s) on it and vice versa. As a result, the structure can move (vibrate) or deform. A good understanding of this problem can help to design the system in term of safety, stability and efficiency.This project aims to optimize and test the Unicorn FSI solver from the FEniCS project [1] to simulate the interaction of fluid and structure in an experiment, which was carried out at Vattenfall Research and Development. The target is to improve the Unicorn FSI solver to cope with a real industrial problem.

To succeed, and make money at your animal production you need to feed your animals with high quality fodder. Other condition to succeed is that you keep your production costs at a minimum. To be able to produce baled silage at a low cost it?s very important that the bales have a high density. Density is measured in kg dry matter (DM) per cubic meter. The purpose with this report was to learn more about making silage in round bales and to how much the bale density varies between different brands of round balers.

Consumers today leave a fragment of information when they pay with their debit and credit cards. The aim of our work is to investigate ways to design a concept of a system in which digitally stored information that today is fragmented among several different holders, can be assembled into a system and made available to consumers. In our study of how a system for financial flow of information should be designed, we intend to study the present situation and the attempts made to alter it into a more informative reality. We intend to investigate the flow of information when a consumer pays by card, and the possible solutions regarding the design and transportation of digital receipts. A majority of the information of our digital consumption is today handled digitally.

To manage the industry?s need of wood assortments in a optimal and cost effective way the forest companies need to have knowledge of the actual standing volume and the yield of the planned clear cuts. The mean volume of the trunk is also important since it is important for the contractors prices. Today the total volume are estimated either with Näslund (1940) or Brandels (1990) functions of volumes, and the yield is estimated with Rune Ollas (1980) function for trunks and stands. The purpose of this study has been to answer the following questions: How good is the yield forecast with data collected with currently used methods? How well can the yield forecasts became with data collected according to the instructions? How well can the yield forecast be with data collected according to the instruction and calculated with the program Aptan for theoretical bucking? The study has been initiated and financed by SCA Skog AB.The material consisted of a number of randomly selected objects ready for clear cut.

An information audit identifies, among other things, organizations information resources, the information flow and the needs of the information users. The purpose of this masters thesis was to describe the management of information within a local unit of Borås municipality by putting an information audit-method in practice. The focus was on three issues: What information needs could be seen in the organization? How does the information flow through the organization? How does Sugan Henczels seven-stage model serve as a tool to map the management of information within the local unit? The study only described the situation at a certain time at the chosen organization. The seven-stage information audit model was revised and adjusted to the studied organization by only carrying out four of the seven steps: Planning, Data collection, Data analysis and Data evaluation.

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

Syftet med denna studie var att undersöka unga idrottares upplevelser i en topprestation.Studiens frågeställningar var:·        Vilka upplevelser har unga idrottare i en topprestation?·        Upplever unga idrottare flow i en topprestation?·        Vilka faktorer ligger bakom en topprestation hos unga idrottare? Utifrån syfte och frågeställningar valdes mätinstrumentet Flow State Scale-2 (FSS-2). FSS-2 består av ett påståendeformulär som mäter den totala upplevelsen av flow samt var och en av de nio dimensionerna av flow.Kontakt togs via telefon och mail med ansvariga tränare vid idrottsgymnasier för att finna unga idrottare med ett tydligt minne av en topprestation. Undersökningsgruppen blev 51 stycken unga idrottare, män och kvinnor i åldrarna16-20 år som utövat fotboll, ishockey eller orientering på elitnivå.Litteratursökning gjordes i bibliotekskatalogen tillhörande Umeå Universitet. Den funna relevanta litteraturen och artiklarna har legat till grund för denna studies bakgrundsdel. Påståendeformuläret FSS-2 visar att undersökningspersonerna, i sin topprestation, hade en stark upplevelse av inre tillfredsställelse, tydliga mål, koncentration på uppgiften, känsla av kontroll och balans mellan skicklighet och utmaning.

Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.

In the digitized world many organizations experience a large flow of information. To sort and manage all the information can be difficult. Individuals may experience a phenomenon called ?Information Overload?, due to the fact that the information flow is too extensive. There are various reasons why individuals are affected by this phenomenon.

This essay is a case study carried out at Flow Systems Ltd that foremost aims to treat the internal marketing at the company. The aim with the essay is to analyze and evaluate Flows internal marketing in connection with a process of change and how this reflects the external marketing in relation to customers.The method that has been used is qualitative in the form of depth interviews carried out with management, employees and customers. This type of data was chosen since it is a good way of gathering more specific information regarding the informants preferences about the company. Among other things the results of the interviews showed internal marketing deficiencies, but that has not influenced the customers in a negative way. The conclusion was that the inferior internal marketing does not affect the cooperation and the communication between the company and its customers, however it has a big effect on the employees..