The effects of dexmedetomidine and butorphanol sedation on skin reactivity during intradermal testing in healthy dogs were evaluated. The effects of dexmedetomidine and butorphanol were compared to medetomidine, a sedative agent having scientific proof of not interfering with skin test reactivity, in a randomised, double blind, cross over study performed on 8 adult dogs. The dogs were sedated with medetomidine (Domitor vet.®, 0,01 ml kg-1) intravenously, or dexmedetomidine and butorphanol intramuscularly (Dexdomitor vet.®, 0,01 ml kg-1; Dolorex vet., 0,01 ml kg-1) after which they received intradermal injections of positive control solutions (histamine 0,1 mg ml-1, 0,05 mg ml-1, 0,025 mg ml-1), a negative control solution (0,9 % NaCl) and allergen extract (Dermatophagoides farinae, Cladosporium and Artemisia vulgaris). After a wash out period the trial was repeated with a reversed sedation protocol.Skin reactivity (wheal size, induration and erythema) and quality of sedation (immobilization, response to stimuli and injections as well as over all working conditions) were evaluated. The combination of dexmedetomidine and butorphanol provided reliable, good sedation and analgesia without adverse effects.

During the past few years there has been an observed decrease in physical fitness within different patient groups. As a part of the rehabilitating physiotherapy treatment it is important to acknowledge the physical condition of the patient. Physical fitness testing might be difficult due to physical limitations within different patient groups. A broad range of exercise tests is therefore of importance in clinical practice. The aim of this overview was to describe exercise tests used in rehabilitation contexts, and to define areas of use and restrictions.

There are several ways of conducting software testing where some may include users and others may include personnel whose work task is to execute test on systems. Although most developers and project managers understand the point of testing the system, it is not always being done and the most common reason is that there is no time for it. However, this is a false assumption as it may instead cause some bugs in the system that would not have been there in the first place if tests had been there to prevent bugs in the code.My purpose for this thesis was to find suggestions for changes in the development process in an ongoing project used by Acino and Svenska Försäkringsfabriken in order to increase the quality of the system used. In this thesis, I have approached the purpose by pursuing a case study of the two companies through observation and interviews. By doing this I acquired the relevant information to make suggestions for change.

This is the end report of my final exam at Medieteknik. It covers the planning, work process and review of a Flash based web application that I set out to do. The goal was to create a user friendly, interactive e-shop with embedded functionality for playing music, displaying rich media content and researching possible payment solutions, to enable buying music files online. The project involved creating the user interface, the programmatic functionality of a Flash client (an SWF file). Also, setting up an Apache HTTP Server and establishing a working ?bridge? between the Flash client and the web server with Flash Remoting components and AMFPHP.

This thesis examines the multiplatform design issues of a development project using agile project methods and how they were resolved. Data was gathered through observation, photography and keeping of a journal using action research as a methodological framework. The thesis is concluded with recommendations on how to deal with these issues in similar projects under similar conditions..

Modern semiconductor design methods makes it possible to design increasingly complex system-on-a-chips (SOCs). Testing such SOCs becomes highly expensive due to the rapidly increasing test data volumes with longer test times as a result. Several approaches exist to compress the test stimuli and where hardware is added for decompression. This master?s thesis presents a test data compression method based on a modified facsimile code.

Metod/Method: Semistrukturerade intervjuer har genomförts med kommunchefen, personalchefen, fyra medarbetare och en facklig representant i Sala kommun. Materialet från intervjuerna analyserades sedan bland annat med hjälp av två av Morgans organisationsmetaforer, Kotters 8 steg, agil projektledning och Derbys tidigare forskning inom området./ Semi-structured interviews have been conducted with the local head of government, the human resource manager, four employees and a union member in Sala kommun. The material from the interviews was then analyzed with help from Morgans organizational metaphors, Kotters 8 step, agile project management and Derbys earlier research on the area. Slutsatser/Results: En organisationsförändring enligt agil projektledning innebar att de teoretiska rekommendationerna för hur en organisationsförändring ska genomföras följdes. Att personalen gjordes delaktig i förändringen gjorde att motståndet mot organisationsförändringen kunde minimeras vilket var den största fördelen.

The focus of this thesis is primarily in electronic construction and describes the design process for a microcontroller circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

Metod/Method: Semistrukturerade intervjuer har genomförts med kommunchefen, personalchefen, fyra medarbetare och en facklig representant i Sala kommun. Materialet från intervjuerna analyserades sedan bland annat med hjälp av två av Morgans organisationsmetaforer, Kotters 8 steg, agil projektledning och Derbys tidigare forskning inom området./ Semi-structured interviews have been conducted with the local head of government, the human resource manager, four employees and a union member in Sala kommun. The material from the interviews was then analyzed with help from Morgans organizational metaphors, Kotters 8 step, agile project management and Derbys earlier research on the area. Slutsatser/Results: En organisationsförändring enligt agil projektledning innebar att de teoretiska rekommendationerna för hur en organisationsförändring ska genomföras följdes. Att personalen gjordes delaktig i förändringen gjorde att motståndet mot organisationsförändringen kunde minimeras vilket var den största fördelen. De nackdelar som fanns med en agil projektledning vid organisationsförändringen var i princip obefintliga i jämförelse med fördelarna./ Organizational change according to agile project management made sure that the presented theoretical recommendations on how to succeed with organizational change were followed.

This essay examines pull-out strength of threaded rods fixed into glulam timber. The technology is intended to be used in hidden joints between glulam components. The work began with a study of literature focusing on current research within the topic, mainly to create a base of knowledge before the testing was initiated. Studies of scientific articles reveals a lack of research within this area, which makes it difficult to develop standards and calculation models for these joints. The drill holes in the tests have a diameter of 7 mm.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

This is the end report of my final exam at Medieteknik. It covers the planning, work process and review of a Flash based web application that I set out to do. The goal was to create a user friendly, interactive e-shop with embedded functionality for playing music, displaying rich media content and researching possible payment solutions, to enable buying music files online. The project involved creating the user interface, the programmatic functionality of a Flash client (an SWF file). Also, setting up an Apache HTTP Server and establishing a working ?bridge? between the Flash client and the web server with Flash Remoting components and AMFPHP.

AbstractA continuous improvement of products and production is an important goal for a modern industrial company. A small engineering group located in Sweden came in touch with the authors of this report during the spring semester of 2014. The aim of this report is, as part of the group´s ambition of improvement, to analyse ways in which the quality of component casted parts can be verified. Non-destructive testing (NDT), and methods to use it for quality control, is the main focus of this report. However, fields such as material standards, component casting and quality engineering are analysed as well.

This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

Detta arbete är en reflektion över ett programvaruutvecklingsprojekt, WAIS, och den arbetsmetodik som användes för detta projekt. Arbetsmetodiken för utvecklings-projektet var Extreme Programming (XP) och vi ifrågasätter om detta val var lämpligt för ett projekt som WAIS. Projektet genomfördes vid Blekinge Tekniska Högskola under våren 2004. Utvecklingsprojektet WAIS var en del av ett större projekt, AIS 42, som stöds av VINNOVA. Huvudprojektets bakgrund och syfte beskrivs för att läsaren skall förstå den roll projektet hade.