The objective of this study was to determine the mineral content in ten New Zealand monofloral honeys, in order to distinguish whether New Zealand monofloral honeys are a good source of minerals compared to honeys from other parts of the world. The ten monofloral honeys were collected from a local honey factory (Airborne Honey Ltd, Leeston), Clover, Honeydew, Kamahi, Manuka, Nodding Thistle, Rata, Rewarewa, Tawari, Thyme and Vipers Bugloss honeys were been investigated. The water content, water activity, pH, conductivity, colour and mineral content were evaluated. The water activity was averaged for all the ten New Zealand monofloral honeys and set to 0.59 aw, which indicates a high stability and long shelf life as a food stuff. A strong correlation between total mineral content, pH, conductivity and colour was obtained.

Unga möter unga is an activity that concentrates on sexuality, coexistence and relations. The project was founded by ?Ungdomsmottagningen centrum?. Ungdomsmottagingen centrum collaborates with the University of Gothenburg in implementation. When us students of socialwork programs have our practical vocational training place during term six we get the possibility to choose to participate on this activity aside of our other practical training.

Syftet med studien var att ta reda på hur gymnasieungdomar upplever utomhuspedagogiska moment i undervisningen. Det är en kvalitativ undersökning gjord vid Bernadottegymnasiet i Stockholm. Studien baseras på deltagande observationer under drygt två fältdygn och på semi-strukturerade intervjufrågor med tolv elever, i tre fokusgrupper. Resultatet visar att elever upplever utomhuspedagogiska undervisningsmoment positivt.

A well, situated on Listerlandet in the western part of Blekinge in Sweden, has a very high content of nitrate. Water with a too high content of nitrate is hazardous to human health, in particular to small children. The area surrounding the well is mostly drained agricultural land with some larger farms for chicken and mink. The well takes its water from the bedrock and is deeper than most other wells affected by nitrate. The bedrock in the area is dominated by limestone with a relatively high flow of water.This thesis was performed in order to find the source of the nitrate.

In today?s society, many people are physically inactive and the health care is for example usingPhysical activity on prescription (PaP) to work against it. In order to increase the physical activitylevel in people they need to feel motivated and there are many factors that can motivate people. The purpose of this survey is therefore to explore the leaders of PaP and their thoughts about whatmotivates clients with PaP to increase their physical activity levels. This is explored by aqualitative method incorporated with semi-structured interviews with four respondents who workswith PaP.

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

Studien undersöker känslomässiga reaktioner vid kooperativt spelande, vilka som är gemensamma för båda spelarna och hur de påverkas av hur svårt spelet är. Arbetet utgick från studier av spelares emotionella reaktioner på spel och teorierna om Flow. Spelet Sanctum användes i en serie tester där mätningar utfördes på två spelare med hjälp av rapportformulär, pulsmätare och hjärna-till-datorgränssnittet Emotiv EPOC. Studien fann att spelarna ibland upplevde samma känslor när de spelade tillsammans och att den ökade svårighetsgradens huvudsakliga effekt var att förändringarna i känslorna blev skarpare och större. Det tycktes huvudsakligen vara motgångar som splittrade spelarnas upplevelser.

This study was conducted at VikingGenetics' bull breeding station in Falkenberg, Sweden. The bulls waiting for the results of their progeny testing at this station are either kept in group housing or individual housing. Since both of these housing systems have advantages and disadvantages, it was in the interest of VikingGenetics to know which of these housing systems is the best. The aim of this study was to investigate the welfare of the bulls in these two housing systems through behavioural observations and the use of activity monitors. In the preparations for the study 16 bulls, 8 in each housing system, were chosen.

Problems arise when the number of products in stock does not correspond with the number of products the information system says the company has in stock. (Sharda & Agrawal, 2012) In order to change that, major changes has to be made when it comes to making continuous improvements and to raise their standards regarding product availability and record inaccuracy (Wild, 2004).The purpose of this study is therefore designed to identify factors affecting the balance differences and what impact it has on the efficiency of material flow. The demarcation of the work is that Atlas Copco has begun working with Lean and it will not be investigated nor the relationship between balance differences and Lean. The study was based on answering the following questions: What influencing factors can be identified for balance differences? What factors are relevant to the efficiency of material flow? What kind of impact the balance differences has on these factors?In order to answer the purpose and issues, a theoretical framework has been developed with help of literature studies and an analytical model.

To the sewer systems households, industries and other activities are connected. The wastewater is collected at treatment plants where a nutritious sludge is produced. The sludge does not only contain nutrients, but also hazardous substances originating from different activities in society. To reduce the flow of hazardous substances to treatment plants and to create a sustainable recycling of plant nutrients the Swedish Water & Wastewater Association has developed the certificate system REVAQ. This certificate requires a good quality of the sludge but also that the treatment plants maps the origin of the unwanted substances.

By means of group contributions the legislator has made it easier for company groups to transfer profits from a parent company to a subsidiary. A parent company can choose to reconstruct by acquire a company, create a subsidiary or perform a partial fission. The choice can affect the possibility for a parent company to perform a group contribution with deduction right.The parent company has to own more than 90 percent of the subsidiary?s shares for a whole taxation year or since the subsidiary began to carry out any economic activity in order to perform group contributions with deduction right. If a subsidiary is acquired, it has to be owned for a whole taxation year before group contributions with deduction right can be made, unless the acquired company never has carried out any economic activity before.

In today?s horse keeping, there is an increasing awareness of the importance of movement and activity for the horses comfort and tenability, while tradition has it that horses should be kept in boxes and small paddocks. In order to develop housing systems that fulfils and optimizes the horses needs regarding movement and activity, we need to know more about factors that influence the activity patterns of horses. A first step is to be able to record and analyze the gaits in horses with an automated system. This could be done by use of accelerometer data.In this pilot study, existing accelerometer technique was used to characterize the different gaits in horses (walk, trot and canter) by studying how their respective signal patterns differ and how this is influenced by the size of the horse.The accelerometers being used in this study measures the movement in three different spaces; horizontal, lateral and vertical.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Problem StatementAfter the hurricane Gudrun in January 2005 EON Elnät Sverige AB started the project KRAFTTAG, were 17,000 km of the airborne power grid shall be replaced with cables underground. The transformers in the airborne power grid shall be dismounted, renovated if necessary and then conveyed to stations, of type kiosk.Additional new transformers, more than planned, have been bought. This is due to the dysfunctional transformer flow from the demolished power supply to projects, were the new power supply is built, the general picture is complicated, since the reconstruction involves other companies and many employees at E.ON.PurposeThe purpose of this master thesis is to map and understand the existing transformer flow. The objective is to make a recommendation on how to increase the level of E.ON? s transformer recycling.Methodthe authors have worked with a system approach, including both qualitative and quantitative data.

This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.