This term project addresses how to develop construction Drawings for a general contract. The project contains supervision, including blue prints as support as needed.Apart from directions on how to carry out the actual work, the supervision also discusses regulations governing all construction Drawings. The supervision is created as guide for similar projects.The construction Drawings is a complete construction guide, hence it includes all construction Drawings. In addition, a room description and a general description is included..

In today?s society, it becomes more common with tablets, that makes us interact with computers in a whole new way. For example these are used to read and write e-mails, surf the web and playing games. Another manner of use of these tablets is to read and edit PDF documents. PDF handling is often meant to be used in books and inregular text documents, but it could also be used in the management of Drawings.An industry that would benefit greatly from the use of tablets for this purpose is the con- struction industry.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

This bachelor thesis discusses three Swedish landscape architects and their plan Drawings and illustrations. The landscape architects are from the 18th century, the 19th century respectively the 20th century. The three persons are: Fredrik Magnus Piper, Knut Forsberg and Gunnar Martinsson. The landscape architects are brought up in chronological order in a chapter each where the person?s life, educations and work are described.

The study should be seen as an attempt to examine how a group of selected muslims from seven different cities in Sweden relate to Lars Vilks?s Drawings of the prophet Muhammed (also called the roundabout dog) and if they feel that their attitude towards the Drawings has changed during the seven years that have passed since the first drawing was published in the newspaper Närkes Allehanda in 2007. To understand these selected muslims? approach, experiences and feelings in regards to the Drawings I examine in what aspect they find the Drawings provocative. I also examine what consequences Vilks?s roundabout dog-project might have had  for individual muslims in Sweden.

Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on Drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on Drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.

Title: Veingeskolan F - Investigation of the indoor environment and a structural analysisMethod: Complete analysis of structural Drawings to determine if the school have been constructed correctly. In my teorethical studies of the Drawings I must seek out points that may have been damaged from moisture, this contains a full survey of the foundation, walls and ceiling. To strenghten the data collected from the Drawings I must visit the school and do field investigations to find out if the school has any problems with the indoor environment.Analysis: I determined that we had some damages on specific places, these damages was caused by leaking roofs, a carpet that was tarnished by strong sunlight in connection with some type of glue and also the ventilation that may have been drawing malodorous air from a shaft in the foundation.Conclusion: I was able to see that the decision to demolish the school was quite drastic, if the county would have done continuous fixups on the construcion when the employes had complained maybe the action to the tear the school down would have been unnecessary. The lack of communication between the two parts lead up to the decision to demolish and build a complete new school..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual Drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual Drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual Drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual Drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual Drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual Drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

The aim of this thesis is to investigate how children experience librarians, their knowledge, assignments and appearance. The children?s thoughts about libraries and librarians in general are also studied. Empirical data has been collected by interviewing children aged 8-12 years old. The method used is qualitative interviews performed individually, in pairs and groups.