The purpose of this Master Thesis has been to investigate the possibilities for a new type of noise reduction solution that could decrease the negative effects resulting from larger traffic roads. The idea has been to construct a noise barrier with a roof ? like a tunnel placed on a road. The choice of material has been focused on transparent materials in order to lower visual intrusion and barrier effects. This project idea is called the Noise tunnel.After having investigated the current offer of noise solutions, it has been concluded that these solutions rarely provide a sufficient level of noise reduction ? at least not when government regulations of acceptable noise levels are applied.

Stress and burnout are two words that are commonly occurring in many contexts today. More and more people experience that they are stressed and that they does not feel well. The long term sick -leave increases as a consequence of people being burned out. These phenomena prolong over all ages, sexes, classes and professional categories, which probably means that the construction industry would not be spared.  In the construction industry, stress and bad health are no new phenomenon, already during the 1970s and big parts of the 1990 s, the construction sector were exposed to the phenomena.A sector that has a large turnover annually cannot presumably be faultless.

This master thesis was done for a company called BRUKS which is active in woodprocessing,bio-energy and bulk material handling industry. The idea for the master thesis wasto develop a new reclaiming method for silos where wood chips are being stored. A mediumsegment of between 1000 ? 5000 m3was defined as the segment with the most sales potential.Two different concepts were produced, one for new constructions and one for rebuildingalready existing silos.In the beginning of the master thesis a lot of time was spent on visiting different BRUKSoffices and customers to get an overview of the industry and the product. This informationwas the basis when the idea generating phase began.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

  Author: Moa di Zazzo EilertsenTitle: ?Children should not grow up like that. They may turn out the same?: Social workers, working with foster care investigations, reasoning about family and family structures of foster homes. [translated title]Supervisor: Annika StaafAssessor: Norma MontesinoThere has been a change in family structure which shows that the nuclear family, which is still the main form of family pattern, is becoming less frequent nowadays.

Karlstads Energi AB:s vågstation vid Hedenverket i Karlstad är en anläggning där invägning och analys av träbränsle utförs. Provtagning och hantering av träbränsle hör till de dagliga arbetsuppgifterna för personalen. Vid nära hantering av trämaterial finns risken att exponeras för trämögelsporer. Exponering av mikrobiologiska luftföroreningar kan orsaka hälsobesvär på lungor och luftvägar hos människor.Efter utförd riskbedömning av vågstationen noterades en oro att trämögelsporer och dammpartiklar sprids bortom lokalen för provtagning av träbränsle till andra utrymmen. Bedömningen talar för att ventilationen kanske är bristfällig och inte är anpassad för den aktuella verksamheten.

The business cycle of the wood flooring branch is currently high however that situation may not be sustainable. In a possible future weaker business climate, the importance of marketing becomes accentuated for firms that aim to maintain their sales levels. We can see trends that competition among the Swedish and foreign manufactures is already stepping up. The intent of this study is to establish marketing guidelines for floor- and molding manufacturers, so they can establish a clearer brand image in DIY retail outlets. By comparing the approach of sports- and DIY stores to brand and product placement, this study aims to bring new knowledge to the DIY branch for improved consumer and product handling.

The standard housing of farmed mink provides little opportunities for them to behave naturally and abnormal behaviours such as stereotypic behaviour and tail biting may occur. To prevent abnormal behaviours animals in captivity are often provided with different kinds of enrichments. The aim of this study was to investigate what kind of enrichment farmed mink use when they have several kinds to choose from and to observe if abnormal behaviours can be decreased with a larger cage and a more multifaceted environment. Totally 20 silver blue, 10 months old female mink were kept in traditional cages (80x30x40 cm) for 7 days and in larger cages (195x80x40 cm) with several types of enrichments for 7 days. The enrichments were wire net- and wooden shelves, wire net- and plastic cylinders, water bath, plastic ropes, branches, straw and tennis balls. One-zero scan sampling on behaviour and choice of place were performed during 3 hours and 20 minutes prior to feeding during 7 days per treatment in April 2004.

Forestry and reindeer husbandry are entitled to use the same land for their operations. For this reason, conflicts occasionally arise between them. Soil scarification is a forestry operation which has a negative effect on the occurrence of reindeer lichen. Reindeer lichens are of crucial importance to reindeers and reindeer husbandry, especially in the winter when reindeers primarily feed on different lichen species (Cladina spp. and Cetraria spp.).

The purpose of this study is to survey and evaluate if the individual contrast sensitivity and preferences for horizontal and vertical lighting level correspond to the values that standard SS-EN 12464-1 recommends for the workplace- and surrounding light levels.This study examines if lighting should be adapted after the individuals? need or if a general value can be found that will cover every individuals? need for a workplace and surrounding light level. This study also examines if parameters like sex, age and/or glasses/lenses have an effect on the amount of lighting that the test subjects need. Lastly we compared the values concerning the relationship between workplace- and surrounding light levels with standard SS-EN 12464-1?s recommendations.The study is carried out with an experimental design that surveys 220 test subjects who were chosen by a selection of convenience.

This essay deals with the rationale and aims for doing cultural or aesthetic activities and projects in schools, and gives special focus to a specific group of students, attending schools provided at special residential homes for young people (sa?rskilda ungdomshem). These homes receive young people with psychosocial and substance misuse problems and who show tendencies towards criminal behavior. The essay investigates how working with a cultural project in schools at these residential homes is justified and also elucidates how this specific group of students and their problems are constructed in the documents surrounding the project. The essay will further ponder over possible educational and pedagogical consequences of these constructions.The investigation has its theoretical frame work in curriculum theory.

Detta examensarbete är utfört på Sandvik Materials Technology (SMT) i Sandviken. SMT har under ett antal år arbetat mot att infria deras två största kunders, Atlas Copco Secoroc och Sandvik Mining and Construction, önskemål om en leveransprecision på 95% och en ledtid på tre dagar för storvolymprodukter av bergborrstål. Idag är leveransprecisionen tillfredsställande medan ledtiden är fem dagar. Examensarbetets syfte är att analysera vad som krävs för att infria Atlas Copco Secoroc's och Sandvik Mining and Constructions önskemål om tre dagars ledtid för storvolymprodukter. Ledtidsreduceringen ska åstadkommas med nuvarande skiftform och utan att leveransprecisionen påverkas i negativ riktning.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

The aim with this study has been to examine and to analyze the discourse of Rosengård in Swedish media. With the concept of discourse is meant here specific ways to speak about and to understand the world, or a part of it. In order to reach increased understanding regarding media presentations and constructions of Rosengård, I have done a study about how Rosengård has been presented in the Swedish daily and evening press during the violent acts that took place in Rosengård in the spring and summer of 2008, when youths regarding to media put cars and containers on fire, and also threw stones at fire engines and other emergency service vehicles when these had to turn out to put out the fires. The collected data, containing newspaper articles, has been analyzed on the basis of the critical discourse analysis, CDA, which is a mould of a textanalytical method. This study applies a social constructivist perspective.