The degree project was made forZetterbergs Industri AB. The company is market leading in Europe in the heavyvehicle industry, designing and building body systems for trucks.In their line of products is the hook lift called Livab, a flexible and uniqueproduct. The hook lift is often demanded by customers because its special ability tobe able to operate in situations with low roof clearance. The main operation principleof the hook lift can be described as a truck stand, laid down.There are two main versions of the hook lift Livab, AL 26 and AL 32. These are ofdifferent load capacity, 17 and 25 metric tons of gross weight respectively.

Uppsala Universitet Sophie DicksenMedie- och kommunikationsvetenskap C-uppsatsAbstractTitle: Communication of gender through design -A study of shapes and colors of perfumebottles and of the fonts on their labels.(Genuskommunikation genom design -En studie av form, färg och typsnitt på parfymflaskor)Number of pages: 39 (82 including enclosures)Author: Sophie DicksenTutor: Mats LindCourse: Media- and Communication Studies CPeriod: Autumn 2006University: Division of Media and Communication, Department of information Science,Uppsala UniversityPurpose/Aim: To study whether gender is communicated through design, and if so is the case, the aim is also to see by which aspects gender is communicated.Material/Method: 40 perfumebottles, 20 for women and 20 for men has been studied, and attributes such as their shapes, colors as well as the fonts on their labels has been analyzed in search of gender differences. An art director has also been interwiewed to receive information about genderdesign from a practical wiew.Main results: There is no difference out of a gender perspective between the colors on the bottles in aspect of lightness but colors on ladieperfumes are generally more saturated and they are also more often located among yellow, orange and red shades on the color chart while perfumesbottles for men tend to consist of yellow, green and blue colors in more unsaturated versions. The results of the study of shapes showes that there are more cubes among the male perfumes than there are in the group of womensperfumes. Concidering the study of fonts does results prove that fonts on labels of male perfumes mostly belong to the most common group of fontfamilies. This compared toperfumes for ladies where the the fonts varied between the two current fontgroups of the study, and therefore are bort rare and common.

This study investigates three different methods for evaluating MOE,Modulus of Elasticity, in field measurements. The purpose is toinvestigate the possibility to use dynamic measurement methods infield measurements that hitherto (2010) has been performed with staticmethods. The objects of investigation are 20 glulam beams. The firstfield measurement took place in november 2007 and applied a staticmethod based on the standard SS-EN 408. The second measurement,described in this study, took place during summer 2010, and appliedstatic as well as dynamic methods.The MOE of wood is affected by a range different factors.

Nowadays, the world around us is changing faster and faster, the globalization is increasing and harder competition puts extra pressure on companies to be more innovative than ever before. One of the fastest changing industries is the IT industry where the actors always have to be up to date to keep their competitive advantage. The authors want to find out what makes some companies in this industry more innovative than others by examining what internal elements that are necessary for innovation. Much research has already been carried out within the field of innovation and especially about innovation management, although less research exists about smaller, non high tech service companies. Therefore the authors also tries to find out how applicable today?s theories are on this special field and thereby fill a smaller gap in today?s research.

Som främsta motiv till offshoringen angav de två företagen i studien kostnadseffektivisering. Båda företagen i studien, Bulls Tryckeri AB och Trelleborg Protective Products, uppvisar en medvetenhet kring en rad riskaspekter som kan vara, och är, närvarande vid offshoring av produktion. Respektive offshoringprojekt föregicks av en bedömning av både kvalitativa och kvantitativa aspekter relaterade till offshoringen. De två bedömningarna, om ej kompletta riskanalyser, uppvisar klara kopplingar till analysering av risk och dess eventuella konsekvenser. Både Bulls Tryckeri AB samt Trelleborg Protective Products arbetar aktivt med att reducera risk i sin offshoringrelation genom riskreduceringsstrategier såsom målkongruens, spackling och horizontal chunkification..

This thesis examines Swedish composers' modes of work and production within the Swedish film industry. It starts off with a historical overview treating live music in early silent film, the conversion to sound and the Swedish production climate until present time. The analysis consists of contemporary empirical studies; interviews with people writing music for film, TV and commercials. The musician's perspective is in focus but directors and other film workers are heard as well. The situation for female composers in a male-dominated industry is also discussed.

In order to suggest improvements for the logistics of STARKA, we felt that we had to analyze all the activities which were related to STARKA's logistic processes. Our primary analysis consisted of a rough but comprehensive description of different functions in the company, and the relationship between them. This was performed by following a typical order through the company to see which functions were affected by the order.Since we needed a more thorough view of the company, we decided to analyze the different products STARKA currently has on the market, focusing on economic data such as turn-over, profit, profit margin, deficiency cost and cost of warehousing. We also analyzed the company's choice of manufacturing processes, organization, warehousing processes, strengths and weaknesses.These analyses gave us a clear understanding of the company and its processes. STARKA is a small, function oriented company with a wide range of products.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

In this thesis, the flows of reactive nitrogen (Nr) in Scania were investigated and quantified. The thesis was also intended to form a basis for comparison between the urban nitrogen flow and other flows of nitrogen within Scania. The management of nitrogen in society has disturbed the natural nitrogen cycle. This is linked to a series of environmental problems such as eutrophication, acidification, global warming and smog. The method used was Substance Flow Analysis (SFA) for Nr. For calculation and flow charts Scania was divided into three subsystems; air, water and society.

Problem: How is Lean, a production-focused model being applied to non-productive focused industries.Purpose: To examine how Lean has been applied to the department of Turbuhaler-Kvalitetskontroll and which parts have been successfully applied.Problem statement: How does the implementation of Lean?s basic concept, which originated in the car industry, differentiate itself from the implementation of Lean in the pharmaceutical industry, in this case the department of Turbuhaler-Kvalitetskontroll at AstraZeneca.Conclusions: The department has had success in its implementation of lean. They have developed and modified the basic concept in order to apply it and excluded the parts they did not consider necessary. Through their work they have accomplished numerous improvements in, among other things, the reduction of lead time. .

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

It is increasingly important for cities to attract visitors, potential new residents and businesses. Jönköping is one of the cities working with place marketing, a strategy that intends to mediate a positive image of the city, in order to accomplish just that.People often have a need to preserve the memory of a trip into something tangible. Anyone visiting Jönköping encounters a souvenir choice, much like the one in many other cities. Linked to the idea of positive place marketing, our work aims to investigate how we as product developers can create a product that en¬hances the image of Jönköping based on the thought that all residents are con¬sig¬nors. Accordingly, we develop three different products from the residents' own image of the city.Our research questions are:Based on the photographs, what image of Jönköping do the ambassadors mediate of their own city?As designers, what in Jönköping's history versus the image of Jönköping today, can we seize in order to give products for visitors a sense of authenticity?As designers, how can we use knowledge of place branding in the development of souvenirs?We performed interviews within three different aspects: history, souvenirs and place branding, all focused on the city of Jönköping.

Even if the main purpose is to decide if the companies profitability and financial position is a determining factor for its growth, the purpose is to determine if there are any differences between big and small companies in there economical positions then they grow, in the selected industry. This thesis is mainly a quantitative study. The selected industry for the study is extraction of turf. The financial measurement that most clearly differ the growing companies from the not growing companies or the companies that didn?t change there amount of employees was the returns of the companies own capital.

In Sweden, the demand for bio energy has increased in recent years due to the current energy and climate debate. In 2008, the energy supply of Sweden was 612 TWh, biofuels accounted for 123 TWh of these. Stumps have been highlighted as a potential fuel in recent years and the Swedish Forest Agency expects a technically and biologically feasible potential of 20.7 TWh annually between 2010 and 2019. The idea of utilize stumps is not new. During the 19th century stumps were used for tar production and during the 70?s and 80?s attempts were made to use stumps in the pulp industry.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.