ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

The 1990s were one of the most profitable periods for European airline companies, mainly because of development of world economy and increasing globalisation trends. However, towards the end of the decade, a global economic downturn, high oil prices and new forms of competition turned the industry towards troubled times. The European air-travel industry had to face and accept the new airline business concept, called low-cost or no-frill airlines. In these conditions, traditional airlines had to rethink their strategies and question the old business model. As a response to the competition, European traditional full-service airlines formed alliances or networks to expand the route network and to increase efficiency.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

In this essay we have been trying to get an understanding of what Swedish charter tourists cares for when they are going on vacation. The Tourism industry is a major field with a lot of winners, but it also comes with consequences. The purpose with this essay is to get an understanding of how aware the Swedish charter tourists is of these consequences. We would also like to get a perception of how the tourists themselves believe that their presence effects the locals at the destinations they are visiting (if they assume that they are). There are several different types of consequences that can appear in the context of tourism, but we have decided to focus on one kind.

This Master Thesis describes how a concept for a new fly fishing reel has been developed. Thethesis has been an interwork with Loop Tackle Design, which is a leading company in the flyfishing industry with their high-quality products. Loop designs and develops all types of flyfishing equipment like fly fishing reels, rods, lines and clothes.The purpose of this thesis is to generate a concept for a new type of fly fishing reel. The new flyfishing reel shall be innovative and reduce the number of components in fly fishing equipment.The solution for this is to create a fly fishing reel that is collapsible and can be used for all typesof fly fishing.The thesis started with a history of fly fishing and the equipments that have been used for flyfishing in the past and what is used today, in order to get an idea how fly fishing haveprogressed. A frame of reference was then compiled to get an idea of the forces and surroundingsa fly fishing reel will be exposed to.

This study is a degree project in environmental engineering at Mälardalens university. Its purpose has been to perform a risk assessment on whether or not any contaminations are present in the soil at two properties in Köping. The assessment was to be done accordingly to a method that has been set up by The Swedish Environmental Protection Agency (Naturvårdsverket). The method for investigation of contaminated sites is called MIFO. MIFO consists of two stages.

Even if the main purpose is to decide if the companies profitability and financial position is a determining factor for its growth, the purpose is to determine if there are any differences between big and small companies in there economical positions then they grow, in the selected industry. This thesis is mainly a quantitative study. The selected industry for the study is extraction of turf. The financial measurement that most clearly differ the growing companies from the not growing companies or the companies that didn?t change there amount of employees was the returns of the companies own capital. It was also the returns of the companies own capital there the main difference existed between the big and the small companies.

Finnhamn is a small group of islands in the Stockholm archipelago. At Stora Jolpan, the biggest island, there is a hostel. The main building was built in 1915 and is called Utsikten. The purpose of this project is to on behalf of the Archipelago Foundation (Skärgårdsstiftelsen) find alternative systems that can replace the existing heating system of Utsikten (an oil-fired boiler and electricity heaters) to a system with renewable energy. The alternative system that this project focuses on is a system of solar collectors combined with a wood chip boiler.

Brands are the instruments corporates use to create and communicate brands reputation. Within the different industries for consumer products intangible assets such as brands are known to have great importance for corporate prosperities. When consumers experiences a specific brand symbolizes best possible value for money, the corporate behind it has managed to create a unique competitive advantage that should be to its full potential. Strong brands can pose the difference between winning or loosing on the market. Due to this brands should be considered as cost-effective instruments since they help create financial advantages such as consumer loyalty.

The importance of human capital in firm valuation is something Huang and Wang points out in there paper from 2008. We expand Ohlson?s valuation model (1995) in line with Huang and Wang (2008) to enhance a market value that includes proxies for human capital. By using human capital based market value and one of Francis, Nanda and Olsson?s (2008) version of earnings quality, we create a value table which aim to sort for undervalued and overvalued companies during the  economic upswing of 2003 to 2007 in the human capital line of business.

This paper intends to show how micro- and small businesses in the tourism and experience industry makes use of social media as a marketing tool. The study also shows the possibilities for businesses to market themselves to customers through social media. Small businesses usually don?t have the same conditions or the same marketing resources that larger companies have. For small businesses that lack marketing resources, social media is a great addition to marketing since the technology around social media is relatively simple.

An increasing demand for wood products in China has resulted in large areas invested in fast-growing tree plantations of eucalyptus. Eucalyptus plantations are often associated with an intensive management including fertilization. By understanding the effects of fertilization and where in the ecosystem nutrients are accumulated a more sustainable forest management could be achieved. In this study, a nutrient budget including all biomass and soil components was created for Eucalyptus urophylla. The examined nutrients were nitrogen, phosphorus and potassium.

The purpose of this study is to examine how textile companies are using "green arguments" in their marketing strategy and how these arguments affect the competitiveness on the market for each of the six companies.The survey that was conducted is based on qualitative interviews with managers responsible for environmental issues in the field of marketing. The purpose of the survey was to examine how companies are using ?green arguments" in order to create competitive advantages. We have chosen to limit the study to the textile industry with the study being carried out in six different companies. The two main theories that make up most of the theoretical framework are Porters five forces and the marketing mix.The survey showed that companies today are using green arguments in their marketing strategy to gain competitive advantages, but only to a certain extent.

Researchers at Karlstad University have developed a method for making paper ion conducting. The reasearchers want to test this technique in various applications and produce products that make use of the ion-conducting paper. Hopefully this will drive the development forward and result in new applications for the ion-conducting paper.This study was to test the possibility of manufacturing a gas sensor of conducting paper along with electrodes of conductive polymers printed on the paper. By comparing the paper sensor with an electrochemical cell in which the electrodes of conductive polymer replaces electrodes of metal and ion-conductive paper replaces the liquid electrolyte in the electrochemical cell, it was hoped that it would be possible to measure the oxidation and reduction reactions that a gas could introduce at the electrodes.It was shown that it is possible to measure a potential difference in the range of 0.3 V to 0.5 V between the electrodes when exposing an electrode to 100% oxygen. The reaction that takes place is relatively slow and the reaction rate is partly due to the distance between the electrodes.Since the sensor can measure oxidation and reduction reactions it is possible that, in further development of a sensor, the sensor can be made ??into a versatile sensor with more applications than gas measurement as there are many more ways to oxidize or reduce the electrodes than by exposure to oxygen.During the study there have been discussions and meetings held with various companies in the sensor industry to be able to specify what the market demands of a sensor made ??of paper and the requirements that must be placed on the sensor for it to be interesting for the companies..

The purpose of this thesis is to ascertain the main determinable factors of Swedish SMEs capital structure decisions and to investigate whether existing capital structure theories are applicable on Swedish SME financing. We have used panel data to run regressions of various capital structure determinants on three measures of capital structure; short- term debt, long-term debt and total debt. We found that growth opportunities, profitability and age are the most important capitalstructures determinants for our sample. Firm size shows a small explanatory result but the effective tax rate and the asset tangibility do not seem to explain the capital structure at all. Thematurity matching principle is considered significant..