The examination of the adequate nature conservation methods in a natural reserve, to conserve a specific species and / or increase biological diversity is the subject of this study. This work is based on four species, that can be found during the Spring season, liverleaf, wood anemone, brimstone and woodpecker. The incidence and availability is studied and closely observed for these species in twenty forests, i.e. ten forests which are nature reserves and ten forests with the similar characteristics as the nature reserves habitat, but are not nature reserves in Gnesta mucipality, Södermanland. Measurements of the tree crown and the diameter of the tree trunks where noted to study how these factors could affect the outcome of the abundance and incidence of the four species.

In this final thesis, an existing method for analysis of chlorophenols (CP) in bottom sediments has been updated and adjusted for analysis of chlorophenols in soil. The covalent bonds between the chlorophenols and the soil matrix were broken through basic hydrolysis and the chlorophenols were then separated from the water phase through addition of sulphuric acid followed by ether extraction. The chromatography was improved through extractive acetylation of the chlorophenols.The updated method was then applied on soil samples from a contaminated area (a former sawmill in Hyttsjö, Östergötland, Sweden).The analyse was preformed by GC/MS with respect to 2-MonoCP, 4-MonoCP, 2,4-DiCP, 2,6-DiCP, 2,4,6-TriCP, 2,3,4,6-TetraCP and pentachlorophenol (PCP).Contamination of chlorophenols in nature can be explained by the former use of wood preservative chemicals based on chlorophenols. In the 1960s and the 1970s these chemicals were used in Sweden, but due to their toxicity they were banned by the Swedish government in 1978.In Hyttsjö a pentachlorophenol-based product named Santobrite was used for several years. The concentration of PCP in the soil samples from Hyttsjö varied from 0.2->1.8 ng/mg dry substance.

The viscosity of air buildings is a hot topic within the construction performers, which the industry feel they have too little knowledge about. This study is mainly aimed against air density in apartment buildings and airflow measurement. The study consists of a theoretical reference, educational visit, interviews and a survey conducted among construction workers at Magistratshagen in Linkoping.Earlier requirement in terms of air leakage through the climate screen was removed and today there are only energy requirement for a dwelling in Boverkets Building Regulations. The difference between a passive and a typical air tight construction is that the passive house have a maximum requirement of 0.3 l /s m2 of air leakage through the building climate screen. The requirement imposed on passive houses is to minimize the supply of power and energy for heating the building.Air tight constructions have heavy demands on the performance and accuracy of everyone involved with the project. The client must specify their requirements and also be prepared to pay for any additional costs. The architect and building planners have to design the building with regard to air tightness. Finally, the construction workers are required to do a careful work in order to get all the connections in the building air tight.The study suggests that an air tight building is a closed system where no forced ventilation exists. There are no reasons not to build too tight as long as there is a functioning ventilation. In this study the authors ask themselves how an air tight building changes over time. No theoretical information has been found on these changes, but the respondents assume that air density decreases with time. The deterioration is mainly assumed to be caused by construction materials changes over time. The study shows that construction workers knowledge of air tight construction is mixed, which they themselves admit in the survey..

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorsprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2013:12.

The current state of knowledge indicates that there is more than one factor that initiates heartwood transition. This study supports its hypothesis on the theory that heartwood is formed by a fixed fraction of the annual growthring, 0,5 to 0,8 rings. To calculate heartwood volume modelings were carried out in four different pine stands with different spacings, 0,75, 1,25, 1,5 and three meters. The model indicates heartwood diameter (HWD) and is based on four explanatory variables, height (H), crown ratio (CR%), diameter breast height (DBH) and tree height (TH). The shifting plant spacing results in varying growth rate in the juvenile stage.

The objective of this study was to contribute with suggestions of nature preservation managements of selected forest objects of high nature values managed by the Swedish state-owned forest company Sveaskog. Many forests with high natural potential are relatively rare today due to modern forestry, where wood production is the main purpose. Sveaskog?s policy is to consider and to priority nature conservation on valuable objects. This assessment includes objects that in the future may develop into nature reserves.

The purpose of the house which is the basis of this report is to be able present itself on the market as a relatively cheap and at the same time a climate friendly choice. The house is supposed to be able to be built anywhere in Sweden and the rest of Scandinavia in a short period of time. This puts demand on what kind of heating system the house can have, since not all places have the geographic advantage of being able to use geothermal or district heating. Therefore the heating system choices will only include those that are not limited by their geographic location. The house will be built in modules which only require the groundwork to be done before the house can be erected. In this report "System solutions for plus or passive-housing" a comprehensive literature search has been conducted as well as a number of calculations.

Illegal logging and its related trade is of great concern around the world. The European Union Timber Regulation (EUTR) is a regulatory approach by the EU to prevent illegal timber and timber products to be placed on the European Union inner market. This means the regulation affects both actors in the member countries as well as the actors exporting timber and timber products to the EU from non EU member countries. This study aims to study the implementation process of the EUTR in Bosnia and Herzegovina (B-H), and its preconditions. Institutional theory is used to understand and explain how the EUTR affects B-H organisations? business environment, and how the organisations choose to respond to the EUTR.

The dissertation were performed on SP, Technical Institute of Sweden. The dissertation were carried out on the measurement technical department, this dissertation is a part of a bigger project, project ClampCal. One of SP?s returning assignments are flow-measurement. When flow-measurement is performed, the flow has to be stopped so that a meter can be installed in the pipes where measurement is going to take place. At every stop there is time delay in the flow which causes the customers to loose money. This is why SP wanted to find a better solution so that measurement can be done without any stops in the flow. Usage of a so-called Clamp-on meter was considered, but since the measurement uncertainty is too large it takes some investigation on the parts where the largest uncertainties occur and thus find a solution that can diminish the uncertainty as much as possible. The parts that were considered to have an opportunity to reduce measurement uncertainties were the fluid temperature, its characteristics and the pipe geometry and its characteristics. For the fluid temperature a Pt100-sensor with four different radii for various pipes was used.

During the last ten- fifteen years the Eurasian lynx (Lynx lynx) population in southern Sweden has increased considerably. This area has a high density of both people and roads and have a higher roe deer (main prey of lynx) density than the rest of the country. Movement patterns such as how long animals utilize their kills and how far they travel from their kills between revisits is unknown for lynx in southern Sweden. The aim of this study was to examine how different factors affected the time lynx used their kills and the distances they travelled from the kill between revisits. The data was prepared and calculated using ArcGIS and the study is based on 98 ungulate kills and 12 lynx individuals.

The cat has evolutionary become an obligate carnivore. Today it is common to feed the cat a dry food. Studies have shown that the dry formula can have negative consequences for the cat. A literature study where conducted to investigate whether the cats origin makes it incapable to compensate for the changes a dry food entails. The impact and implications regarding water intake, energy intake and blood glucose concentration when feeding the cat dry food where examined.

In this study, the efficiency of a newly launched predatory mite, Amblydromalus limonicus, has been examined for its potential to use as a biological control agent in cucumber production. A. limonicus can be used for biological control of two thrips species, Frankliniella occidentalis and Thrips tabaci. Field trials were conducted in greenhouses of two conventional cucumber growers in Scania, the southern part of Sweden. The basic control agent used against thrips was the predatory mite Amblyseius swirskii. In selected areas, additional A.

In fisheries, there is a long tradition to use catch data when evaluating changes in the stock and effects from harvesting. It is a common practice to use Catch Per Unit Effort (CPUE) as an index of population size, and several studies have investigated the properties of CPUE in relation to population abundance, spatial distribution and efficiency of gear. In research, catch rate on trap-transects is used as an index of abundance for wildlife species but CPUE is rarely applied as a tool in harvest management.In 1993, more than 60 000 km2 of the state managed mountain range in Sweden was opened to the public for small game hunting, under the responsibility of the county administrative boards in Jämtland, Västerbotten and Norrbotten. The total area is now divided into 332 hunting units (median=73 km2) and an internet based system is used to administer licences and reporting bag statistic. Each hunter has to register the results within two weeks after the hunt.

An Internet application, VEDAIR, for estimation of air quality in regions with small-scale combustion of bio fuel has been developed by Swedish Meteorological and Hydrological Institute with financing from Swedish Energy Agency and Swedish Environmental Protection Agency. The model contains user interface and a coupled model concept where concentrations of atmospheric pollutions are calculated for regional, urban and local contributions. In this report the model is described and a first study of air quality considering PM10 (particles with a diameter less than 10 µm) in two Swedish municipalities, Vänersborg and Gnosjö, is introduced.According to the result, there are areas with poor air quality even in smaller Swedish municipalities, mostly due to high emission from buildings with older wood heating furnace without hydraulic accumulator.In Vänersborg three areas were analysed in VEDAIR for the year 2003: Vargön, Mariedal and the downtown district. In the whole municipality the upper evaluation threshold for PM10, which is defined as 14 µg/m3 for annual average, was exceeded due to background contribution of particles. In all areas, however, the concentrations of PM10 were less than the environmental quality norms.

If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.