The aim of this thesis was to analyse BARO WOOD AB:s timber measuring and quality sorting and to evaluate the analyse program Stockholmen. The purpose was to get a better understanding for the quality sorting made at BARO WOOD AB today, analyse differences in center board quality from logs with a good quality and logs with a bad quality, suggest new sorting criterias developed from analyses made with Stockholmen and to evaluate the program Stockholmen. All analyses are based on data gathered in a test sawing made at BARO WOOD AB in June and July 2002. The test sawing was made on four different diameter classes and every diameter class consisted out of A or M-grade logs, with a better quality, and B-grade logs with a lesser quality. The logs where sorted out with BARO WOOD AB:s existing quality criterias.

Stronger demand has been put on forestry to show environmental considerations during harvesting. This is especially for crossings of brooks with sensitive elements and great care should be observed when they are to be crossed during harvesting by logging machines. For that reason Hultdins has constructed a portable bridge that can be used for those occasions. The bridge has been developed in accordance with wishes from SCA forest, since they have a great deal of brooks in their forests and in private forests from where they buy part of their wood supply. The aim for this report is to investigate if this portable bridge can be of interest for the forestry market. The research has been made at SCA skog in Medelpad and Norrskog in Medelpad.

Rutiner skrivna i Verilog har utvecklats för avkodning av en frekvensmodulerad signal givet ett Analog Devices AD9874-chip. Olika metoder för I/Q-demodulation har utvärderats och av dessa har CORDIC valts och implementerats i Verilog.Koden har till viss del testats på en IGLOO nano-FPGA men framförallt simulerats och verifierats i ModelSim..

At the end of 70s and the beginning of 80s, 18 terminals was built and used for chipping wood residue from clear cuttings. Most of the terminals was terminated before the 2000s but with the high oil- and energy prices that we can see today there might be a place for these terminals again. The goal with the study was to analyze and compare economical differences between 5 different logistical systems, collected data was used with a set of formulas. The systems include long range transport of slash, chips and bundles. Three of the systems include transport by lorry to industry the last two includes a terminal with access to train transport.

?Development of Norway spruce, Douglas fir beech and Scots pine with a larch shelter wood? is a report written by Per-Olof Magnusson. The thesis is a compulsory part of forest engineer program at ?Skogsmästarskolan?, SLU, Skinnskatteberg, Sweden. The purpose of this report is to describe and evaluate an experiment with hybrid larch (Larix x eurolepis) as shelter wood, and different tree species growth and survival depending on the density of the shelter wood. The experiment is conducted by southern Swedish forest research centre, faculty of forestry, SLU in Alnarp. The hybrid larch ought to be an interesting alternative to birch (Betula sp.) as shelterwood on suitable sites in southern Sweden.

The global wood pellet market has seen a rapid growth after the adoption of the Kyoto protocol and the renewable energy incentives created within the European Union. The global consumption of wood pellets reached 13,5 million tonnes in 2010 and several experts estimate the consumption to be between 35-50 million tonnes by 2020. These forescasts raise the questions which regions that can supply this vast amount of wood pellets and what the conditions are for producing it. This study evaluates the conditions for wood pellet production and export from British Columbia, on Canada?s west coast, focusing on existing industry structure, raw material supply and the distribution chain.

Dead wood is important for many species. The amount of coarse dead wood (diameter >10 cm) is much lower in managed forest than in unmanaged forests. Stumps constitute the largest proportion of the volume of coarse dead wood in managed forests. Since stump harvest for biofuel may increase, the amount of dead wood will decrease even more, which may threaten biodiversity. The first aim of this study was to compare the amounts of fine woody debris (FWD, .

The survey aims to shed light on traditional and contemporary bottom floor frames, their construction and different insulating materials; mineral wool, wood shavings and charcoal. The purpose is to analyze and discuss the similarities and differences as well as the pros and cons with a focus on the construction and the different insulating materials. The work has been limited to comparing two different wooden floor frames. The first one is based on a real floor frame from an older building, this example is presented as the traditional floor frame in this study and are from around 1940. The other floor frame is presented as a contemporary floor frame and is based on wood building type descriptions and literature.

Saproxylic lichens in managed forests have less substrate available than in unmanaged forests due to the shortage of dead wood. However, a suitable substrate for these lichens could be dead branches on living trees. To this date, there has not been any systematically collected data about theabundance of dead branches on living trees and the lichens growing on these branches in managed forests. The aim of this study was to see where dead branches were located on living trees of Pinus sylvestris and Picea abies, how large the surface area of these branches was and what lichens grewof wood on these branches. The study was made in Finspång, Sweden, where 11 forest stands of P.sylvestris and P.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with Wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

Today green tree retention, together with leaving dead wood, is a common practice with the aim to reduce negative impacts on biodiversity and environment due to clear-felling. To better understand whether this conservation practice also makes a long-term difference, it is important to know what happens to these trees after harvest. Few studies have made an assessment of what happens to retention trees over a longer time period. In this study I inventoried retention trees that were left at clear-cuts six, twelve and eighteen years ago. I carried out a re-inventory of 57 retention patches (divided into free-standing tree groups, small swamp forests and edge zones) and free standing dead trees, spread over 25 previous clear-cuts in central Sweden.

The main purpose of this study is to investigate how to reduce the high, and every decade raising, pre-clearance cost. The pre-clearance is today carried out with a brush saw and paid per labour hour. All small trees not suitable for pulpwood are removed to simplify the later work of the harvester. The study compares the economic results from thinning of four parcels each treated differently regarding harsh or light pre-clearance and extraction of only pulpwood, or both pulpwood and fuel wood. In this type of spruce stand the study indicates that a lighter pre-clearance, followed up with both pulpwood and a fuel wood extraction, has a much better economy than the traditional method of hard pre-clearance and only pulpwood extraction..

This final thesis is performed on commission of Torsby forestry administration, Stora Enso Skog. Stora Enso Skog is one of the major forestry companies of Sweden. The main business area is located in and around the region of Bergslagen. During the last decade the practice of forest management has rapidly changed due to a new forest legislation. The new law has resulted in that the production goal is equal to the environmental goal within forestry.

Sweden recently changed the national regulation of chimney sweeping. This study has two purposes. The first purpose is to evaluate the effect of this reform to see if the new regulation has led to an effect in terms of increased chimney fires in single-family houses and for the wood-burning and oil-burning stoves, respectively. The second purpose is an updating of a previous study (Mattsson 1994) of analysis of society´s benefits and costs of different alternative sweeping frequencies for wood-burning and oil-burning stoves. This study also has a secondary purpose to examine the extent to which the local sweeping rules vary with climate conditions.  Mattsson, based on his results, proposed that the sweeping requirements for oil-burning stoves should be reduced from twice a year to once every second year and for wood-burning stoves the sweeping should be reduced from four times to once each year.

In my thesis I have sand blasted different type of woods - ring-porous and diffuseporous deciduous tree species and conifers - to show different results depending on the species, the direction of the grain and the effects of surface treatment of a blasted surface.The results of my tests were sometimes unexpected, such as that the sand from blasting almost completely disappeared, that all wood surfaces after blasting exhibited a much lighter or paler surface than before and that the diffuse-porous tree species showed differences in hardness between the beginning and end of annual rings.By creating a library of different kinds of wood and sandblasted surface treatment, I have created a reference bank that I will be able to use me in the manufacturing of interiors, furniture and other objects..