The thesis work has been carried out at Volvo Aero Corporation (VAC) in Trollhättan. VAC has entered a partnership as developing and producing partner with engine manufacturer Pratt & Whitney and is currently at the starting phase of producing the turbine rear frame (TEC) to the engine PW1000.The purpose of this study was to create a report on process level that describes the conditions and the potential with PW1000 TEC to reach the product cost calculation taking into account lead times and describe alternative method solutions.The report describes a comparison between the present flow (2012), a flow based on product cost calculation (2016) and a potential flow (2016). The work has mainly been based on acquiring the knowledge and information available to inspect the present flow; this has been done by workshop observations, meetings and gathering of the information that is available on the work site for the PW1000 TEC.The information obtained has been merged into an Excel document, called Roadmap. It serves as a roadmap with current situation as the start and the potential flow for 2016 as the goal. With the roadmap as a tool, assumptions have been taken considering the flow and how it will change, where processes have been eliminated, reduced or marked as a problem..

SyfteDenna uppsats syftar till att analysera kundsegmenteringsmetoder fo?r ett mikrofo?retag pa? industriella marknader betingat av att fo?retaget har mycket begra?nsade resurser och kunskap ro?rande denna typ av arbete.Frågeställningar1. Med utga?ngspunkt fra?n sin marknadssituation, hur arbetar R-Produktion med marknadsfo?ring och kundsegmentering och vilka fo?rdelar och nackdelar a?r fo?renliga med detta arbetssa?tt?2. Baserat pa? marknadssituation och interna fo?rutsa?ttningar, vilka teoretiska segmenteringsmodeller a?r ba?st la?mpade fo?r fo?retaget med ha?nsyn till praktisk genomfo?rbarhet, resursanspra?k och fo?rva?ntad homogenitet?3.

My work has resulted in an interactive search engine for plants that can be found at www.plantit.se. In the work process I have searched for which search criteria is most important when doing searches on woodland plants. I have done this by an analysis of existing databases and with an survey where leading plant expertise answered questions about woodland plants. I analyzed three search pages that are on the internet today Havenet.dk, Backyardgardener.com and Den virtuella floran. I concluded that there are several flaws but also many positive aspects that I have used when developing the interface of my page. The survey resulted in the basis for my search criteria the answers listed the most important factors when planting woodland plants. From this information I developed a system with five values on every criteria.

I denna rapport utreds olika metoder för att kunna reglera vattennivån i vattenkraftverket Avesta Lillfors i Dalarna. Två kraftverk ligger endast 900 m uppströms och detta gör att svarstiderna blir korta och regleringen blir lätt nervös. Att använda sig av vattennivåreglering i ett kraftverk för-enklar dess styrning då anpassning till inflödet sker automatiskt.En flödestabell har tagits fram genom mätningar i turbinen, med hjälp av Winter-Kennedy-metoden. Denna tabell används för att kunna fram-koppla regulatorn och därmed dämpa stora variationer i inflödet. Dessu-tom har en modell av älven skapats och testats med en återkopplad PID-regulator.

In this study, the sea trout (Salmo trutta) spawning migration was studied in the river Själsöån, Gotland, to assess the main external factors determining upstream migration and seasonal changes in fish parameters. Additionally population trends were studied by examination of old data. The most important external factors for upstream migration were the air pressure, air temperature and wind direction. No significant difference was found between when males and females migrated upstream. Larger females in better condition started migration earlier than the smaller females in poorer condition.

Control of a diesel engine equipped with Variable Geometry Turbine (VGT) and Exhaust Gas Recirculation (EGR) requires a multivariable control method. One problem is that the engine system is non-linear. Furthermore there are strong cross-connections between inputs and outputs and the inputs have alsoboundaries. To be able to manage these control problems, MPC has been used that is a multivariable method. The MPC-controller consists of an optimization problem and therefore MPC can find the optimum control signals in an easy way.

In today?s society there is an increasing demand for renewable energy sources such as sun and wind power. These sources are intermittent, and energy storage is therefore needed to ensure a constant power supply. This report compares pumped hydro energy storage (PHES), compressed air energy storage (CAES), flywheels, batteries, super magnetic energy storage (SMES) and hydrogen energy storage.The opportunities for further development are limited for PHES and CAES in comparison with the other technologies. Lithium-ion batteries and hydrogen energy storage are considered to have the most potential in the future.

Ljud och trädgård är kanske inte det första par man tänker sig som gifta men de tus historia kan spåras längre tillbaka i tiden än man kan föreställa sig. När jag bestämde mig för att skriva min kandidatuppsats om akustisk trädgårdskonst trodde jag att ljudinstallationer i trädgårdar och parker var ett nytt fenomen. En helt ny värld öppnade sig framför mina ögon då jag insåg att så inte var fallet. Konstgjorda ljudkällor, såsom gyllene fåglar och vattenorglar, har kommit och gått genom tiderna medan naturliga ljud, såsom vind och fågelsång, bestått. När det kommer till vår egen tid är trädgårdsljud, även om moderna material och tankesätt används, en konstform som starkt präglas och inspireras av sin historia. Du kan skapa olika sorters ljudmiljöer i din trädgård beroende på vad du väljer att använda för material.

The problem presented in this report is that of finding a method to calculate the lift force from a single-element airfoil of arbitrary shape. A number of restrictions are used in order to simplify calculations while retaining reasonable accuracy. The problem is solved for the two-dimensional case only and no finite-wing effects are taken into account. Furthermore, inviscid and incompressible flow is assumed. The method used to solve the problem is the vortex panel method, with vortex singularities distributed over simplified airfoil geometry.

SyfteDenna uppsats syftar till att analysera kundsegmenteringsmetoder fo?r ett mikrofo?retag pa? industriella marknader betingat av att fo?retaget har mycket begra?nsade resurser och kunskap ro?rande denna typ av arbete.Frågeställningar1. Med utga?ngspunkt fra?n sin marknadssituation, hur arbetar R-Produktion med marknadsfo?ring och kundsegmentering och vilka fo?rdelar och nackdelar a?r fo?renliga med detta arbetssa?tt?2. Baserat pa? marknadssituation och interna fo?rutsa?ttningar, vilka teoretiska segmenteringsmodeller a?r ba?st la?mpade fo?r fo?retaget med ha?nsyn till praktisk genomfo?rbarhet, resursanspra?k och fo?rva?ntad homogenitet?3.

The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

There are five endemic populations of migratory Atlantic salmon (Salmo salar, Salmonidae) and brown trout (Salmo trutta, Salmonidae) remaining in Lake Vänern, whereof two are salmon and three are trout. There is one population of each species in Klarälven, also one of each in Gullspångsälven and there is a population of trout still remaining in Tidan River. Since the beginning of the 20th century endemic populations of salmon and trout have either vanished or declined dramatically due to the construction of hydropower in the rivers around the lake, and still today the future of the remaining populations remains uncertain. To manage salmonid fishes effectively more knowledge of their ecology throughout their different life-stages is needed. A large part of the Lake Vänern salmonoids lives are spent in the lake, where a mayor mortality factor is recreational fishing, especially angling.

Detta examensarbete har genomförts på begäran av byggnadstekniska byrån i Uppsala. Företaget behöver en ny beräkningsmall med vindlastberäkning för väggar och olika taktyper enligt Eurokod.I dagsläget använder företaget en beräkningsmall som är baserad på gamla normer enligt BKR. Dessa normer kan dock inte användas längre enligt nya bestämmelser inom branschen. Enligt de nya bestämmelserna bör dessa vindlastberäkningar genomföras med hänsyn till Eurokod i framtiden.För att kunna beräkna vindlasten enligt Eurokod och effektivisera beräkningsgången har man utvecklat en beräkningsmall baserad på Eurokod. Alla nödvändiga parameterar enligt standarder har använts i beräkningsmallen och användaren tillåts genomföra en snabb och enkel inmatning av projektmått för att på ett automatiserat sätt genomföra belastningsanalysen.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.