The aim of this master thesis was to find and grade suitable sites for wind turbines in the rural district of Lerum at the reguest of Göteborg Energi. The rural district of Lerum consists of very complicated terrain which was the reason why we picked Lerum.The assignment was achieved by using the software program ArcGIS and its attendant tools. In step 1 an overall analysis was made in order to sort out the least suitable sites. Step 2 consisted of a 3D analysis in ArcScene together with a more precise analysis in ArcMap. As result we found two interesting sites, which met our demands and specific constraints.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

Mechanical ventilation is the most common type ofventilation in newly constructed office buildings. Therehas been an interest to utilize natural ventilationinstead of mechanical ventilation among architects andHVAC consultants in recent years. This is due to thesize of mechanical ventilation systems, which arespace consuming. The mechanical ventilation system isalso complex and requires maintenance. Furthermore,the fan uses a considerable amount of energy.

Housing construction very close to the lake Mälaren has become very popular today. One potential problem with these houses is the influence of the sea climate. Unprotected buildings are affected by strong winds and precipitation. So for that reason, it is very important to make an accurate climate investigation and use it for decision-making during the planning of the new settlement.It is very important with a good moisture protection regarding pelting rain, that is the combination of wind and rain. This is more important for buildings close to a lake, as this location normally means a higher exposure to wind.

This paper aims to explore the phenomenon urban wind energy, its visual effect on built environment and the factors that affect the opinion towards new elements in the city. A place study of the city Gävle serves as a complement to the theoretical part of the paper. The theoretical discussion opens with an account for the technical and economical conditions of urban wind energy. It presents the technical basics, different types of turbines and a discussion occurring wind related techniques in built environment. Today, the knowledge of how the wind moves and acts in the rural landscape is quite good.

Both the German and the Nordic power markets are seeing dramatically changed conditions due to an ongoing process of expanding the share of renewable production in the systems. For the German part this comes from heavy subsidies which have led to an explosive development in installed capacity of photovoltaic and wind based production. After the Fukushima incident it has been decided to shut down all Germanys nuclear plants. This capacity drop is however not of the same magnitude as the increase in renewables, but will impact the stability of the power system. The Nordic power system which already has a surplus of power sees an even further increase, coming mainly from construction of new nuclear plants in Finland and a general increase in wind farms.

The purpose of this paper is to understand the climate of the street and how it can be modified to better meet the needs of the street and the user groups. At the same time the conditions of the street and its surroundings also has to be taken into account. To accomplish this it is necessary to have a broad knowledge of the climate conditions in the city. Therefore an overview of the climate elements and how these are modified in the built-up areas are given. The part of the paper which deals with the city climate has a global approach to be able to give an as complete picture as possible.

The project contains a force analysis of the vertical axis wind turbine Lucia's supporting arms and a measuring device to experimentally measure the forces is made. The forces between the supporting arms and the tower are calculated theoretically and then simulated by a computere. A measuring devise is then designed to measure the forces experimentally. The forces acting on the attachment between the supporting arms and the tower is primarily the centripetal force, gravitational force and the aerodynamic forces on the rotor wings. The maximum forces were theoretically calculated and is 13.38 kN along the x-axis, -0.25 kN along the y-axis and then 0.5 kN along the z-axis.

The purpose of this study was to find out how SISU reason about cohesion with respect to its own operations, as sports consultants.There is no previous research on how sports consultants using cohesion as a pedagogical tool. However, there is research on cohesion linked to sport. Earlier research sees cohesion as a multidimensional phenomenon. This means that multiple factors determine the experience of cohesion. Such factors include how how-knit the team or group are, individual and joint objectives and that the individuals share common experiences.

This project has revolved around finding better ways of overseeing vibrations of the gearbox at a wind power station. The gearbox has been a huge problem at the stations located at Gässlingen and the sooner the warning of an incoming breakdown is at hand the more money you can save from preparations. The work has been carried out together with Askalon AB in cooperation with consults from ÅF. Askalon is a company with a department focused on overseeing vibrations and it is in collaboration with that department the work has been carried out. During this work, new positions for the sensors and new methods of gathering and analyzing data have been worked out. This was then implemented at a wind power station to be tried out on site.

En del länder väljer att investera och utveckla vindkraftmarknaden mycket, medan en del länder väljer att inte göra det. I Europa startade vindkraftutvecklingen under 1970-talet. Efter en trög start är den europeiska vindkraftutvecklingen nu marknadsledande och fortsätter att expandera i hög takt. Tyskland har den högsta installerade kapaciteten av vindkraft i världen, och Danmark har den högsta installerade kapaciteten per capita. Dessa länder, samt Spanien, Sverige och Storbritannien har alla satt nationella mål för utvecklingen av vindkraften.

The main aim of this thesis is to examine what motivates people to become entrepreneurs and how they are motivated to continue being it. We have decided to focus on four elements: the driving force of being an entrepreneur, the environment, the individual background and important personal characteristics of the entrepreneur. Qualitative interviews were carried out with six information consultants. The theoretical background has its focus on entrepreneurial motivation. A model of entrepreneurial motivation by Naffziger, Hornsby and Kuratko 1994 is presented.

Användandet av betong som ersättare för stål vid produktionen av vindkraftverkstorn har ökat den senaste tiden. Betongtorn är betydligt billigare än ståltorn men problem som sprickbildningar, frostsprängningar och följaktligen armeringskorrosion har uppstått bl a på grund av vibrationer från rotorn. I fundamentet i vindkraftverk kan ovan nämnda problem också uppstå och det uppfyller således inte alltid funktionskraven. Det här examensarbetet undersöker möjligheten att eliminera dessa problem genom att använda en sorts högpresterande betong kallad UHPC 2.2 med syntetfiberarmeringen, STRUX. Jämförelser mellan tidigare empiri om högpresterande betong och laborativa tester på UHPC 2.2 visar att den senare är beständigare och ger möjligheter till en större sprickfrihet.

The purpose of this study was set against the background that social media today are used as an platform for companies to communicate with their customers, as well as communicate their brand. Therefore it was interesting to examine this phenomenenon through a critical point of view and try to put light on the different forms of power that is produced on this arena.The overall aim of this study was to examine how PR-consultants talk about social media as a communication channel. The empirical data consisted of five interviews with PR-consultants on five different PR-agencies. The theoretical framework was based on a social constructional perspective and Foucault?s theory of power.

Målet med detta examensarbete, utfört på uppdrag av Vectura Consulting AB, har varit att undersöka möjligheten att ansluta en vindkraftpark till järnvägens kontaktledningsnät. Möjligheten att koppla om vindkraftparken till järnvägens hjälpkraftnät, som bland annat förser växelvärmare och signalsystem med effekt, har också undersökts. Eftersom kontaktledningsnätet och hjälpkraftnätet arbetar med olika frekvenser och spänningar, 16? Hz och 15 kV respektive 50 Hz och 22 kV, måste därför en komplett krets för frekvensomvandling, spänningsomvandling och omkoppling tas fram. Projektet har begränsats till en del av Botniabanan, sträckan Örnsköldsvik-Nordmaling.I denna rapport har trafikfrekvensen på den valda sträckan på Botniabanan undersökts för att bestämma en genererad effekt till inkopplingspunkten, samt för att undersöka när det kan vara lämpligt att koppla om till hjälpkraftnätet.