The purpose of this study is to investigate how to use remote sensing data when making a forest management plan. The main focus of the study is to compare different methods to identify forest stands of a forest property, and by manual measures and estimates try to evaluate the quality of interpreting data. This report is based on survey questions sent to five different organizations working with remote sensing data. Only two of these where willing to participate in this investigation. The organizations where asked to analyze the same forest property and divide into compartments and make estimations of volume, basal area etc. in every stand.

Det problem som denna uppsats hade för avsikt att besvara var varför hemautomation inte används i fler hem. Genom resultaten från en enkät som distribuerades kunde slutsatsen att kostnaden för de befintliga lösningar som finns på marknaden idag inte låg i den prisklass våra respondenter ansåg rimlig. Författarna utvecklade då problemet och ställde sig frågan om en hemautomationslösning verkligen måste ha en så hög kostnad som de befintliga lösningarna har idag. För att belysa detta problem implementerades en egen kostnadseffektiv lösning där respondenternas mest önskvärda funktioner togs i beaktande och en testmiljö implementerades utefter dessa. Resultatet blev en hemautomationslösning med stor potential och med en betydligt lägre kostnad än dagens befintliga lösningar..

 Syftet med denna undersökning är att ta reda på vilken mjukvarubaserad fjärranslutningslösning som passar för ett mindre företag, då de har mindre ekonomiska tillgångar än ett större företag behöver de vara mer noggranna med sina produktval. Arbetet är utfört med litteraturstudier och en enkätundersökning till ett tiotal mindre företag, samt en laborationsmiljö där tester av de olika fjärranslutningslösningarnas egenskaper har utförts.Område valdes då ämnet fjärranslutning knappt behandlads under utbildningstiden, och fördjupar sig därför inom området.Resultatet visar vad mindre företag anser vara de viktigaste egenskaperna med en fjärranslutningslösning. Även de värden som uppkom vid tester i laborationsmiljön kommer att presenteras i resultatet. De samlade resultaten kommer sedan visa på vilken mjukvarubaserad lösning som passar bäst för ett mindre företag. .

Detta är ett uppsats på D-nivå. I en tidigare kurs, inom vårat program Data- och Systemvetenskap, kom vi på en idé om hur man kan förbättra/komplettera utbildningen av nyanställda som befinner sig i en stressig arbetsplats på företag där det är ett ständigt behov av återanställning av personal. Vi utvecklade detta koncept och kom med idén till en simulator som kan utbilda personal samt minska stress hos nyanställda. Idén mognade till en Serious Game simulator baserad på en Wii-kontrollerad PC-baserad simulator med Bluetooth-stöd.Syftet med denna uppsats är att skapa en guide om grunderna i en simulator som utnyttjar Wii-kontroller som externa inmatningsenheter. I denna guide kommer vi att täcka hur Nintendos Wii-kontroll fungerar, hur man kan skapa enkla 3D-modeller i Blender och även hur detta kan implementeras i Microsoft XNA.

This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

What is e-leadership and how can it be framed in a distance context? How can work motivation be understood as a correlated theme? In prior leadership research and theory it has been taken for granted that leadership occurs in a face-to-face environment, so how to study leadership in a remote context? According to recent research, e-leadership defines this leader-member relation in this new arena, and a central focus of this research has been on communication. Communication is a central theme in the remote setting because it is the only interaction arena which allows leadership to be seen and understood. By conducting a case study in a multi media organization with distance working journalists as focus group this essay aims to bring a deeper understanding of how e-leadership works and how it effects work motivation. The field of media organizations is interesting to study as distance work is not an unusual working environment for journalists, and research has indicated that work motivation needs for these highly specified creative workers are somewhat differentiated from other, for example industrial workers, which implies that motivation theories urges an update.

This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

This paper examines the power producing dams along the Ume-river as an integral part of and a result from the urbanization process in Sweden during industrial capitalism. The aim of the paper is to contribute to the knowledge of the urbanization process in Sweden in general and of its traces along the Ume river in the county of Västerbotten in particular. The paper applies the theory of concentrated urbanization and extended urbanization put forward by Neil Brenner and Christian Schmid (2015) and argues that the building of power producing dams along the Ume-river is part of an extended urbanization process. This becomes particularly evident when examining the vast physical structures that is the dams, situated in an otherwise remote and sparsely populated area. These vast physical structures are also very well connected to a nation wide electric grid that has connections to bordering countries as well.

Traditionally, mining has been performed mechanically with implementation ofyesterdays (and older) data. Several mining companies have started to useautonomous technology and robotics in the production areas although the harshmining environments make it unsuitable for today's electronic equipment. Despite allthe obstacles along the way of digitization, there seems to be no end in sight as thisdevelopment continues. This thesis focuses on what the mining industry is aiming forand why the mining companies are interested in these technologies. The actors of themining industry can be found to have a vision for the future mine, a production with ahigher degree of digitization and resemblances to a factory.

This thesis includes a description of the project flow for our projects at Semcon. The emphasis is on designing a manual for elMaster Concept.The project flow provides several minor and major elements plotting schedules for this project and the establishment of a manual. When a schedule is drawn, lists and tables with components and connections can be created. This is done to better manage drawings and make changes. These diagrams and tables are used in product manufacturing, testings, controls.

The non-governmental organization Gram Vikas primary concern is to establish clean water in remote areas inhabited by often aggrieved tribals and low caste communities. Gram Vikas? slogan is Water for dignity. It refers to that everybody, regardless whereupon the social ladder you are, are entitled to the most fundamental elements for a dignified life. The purpose of this essay is to highlight the factors that are important for a shift to a more equal and sustainable living.

This project is part of the course MF10YX, introductory mechatronics. The purpose of theproject is to integrate modules from the group members previous specializations into amechatronic system in the form of a self-balancing robot. The prototype ?Charlie? should be ableto race along a 10 - 30 m line. It should be able to start manually and autonomously detect andstop after the finishing line.

This report discusses the development of an autonomous system that can travel a distance of atleast 30 meters on two wheels. The system, the robot, detects black lines and stops if one isdetected. A remote control can be used to start and stop the robot. The robot is constructed ofmainly steel with smaller, more detailed, parts in plastic. A significant amout of time has beenused to enable the robot to balance on its own.

I en värld där kraven på flexibilitet, säkerhet och hårdvaruoptimering är nyckelfaktorer när det kommer till att välja IT-miljöer för företag blir virtuella skrivbord mer och mer poulära. Med dessa miljöer finns det också problem när det kommer till användarupplevelsen om nätverket ifråga inte kan uppfylla de krav som ett sådant system ställer. I detta arbete undersöks implikationerna vissa nätverksvariabler kan ha för en Virtual Desktop-infrastruktur, VDI. För att belysa dessa problem har två tester utförts på en VDI miljö. Det första testet gick ut på att mäta latensen då skrivbordsmiljön renderades för klienten från virtualiseringsservern vid olika nätverksdiamterar.