In the constitution of Sweden everyone has the right of common access in the nature. Toprotect these rights, as well as the nature, in areas close to shores the environmental law ofSweden (miljöbalken) protects areas within 100 meters from the waterline. Due to amendmentin this law, Swedish municipalities have to present countryside development areas close toshores. Within these areas, which are to be displayed in the municipality?s comprehensiveplan, it will be possible to get exemptions from the protection if the planned measure willbenefit the development of the region.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine setups they required during the production process.

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

Environment friendly transports are one of the main topics in the industry and society today.Shell organizes an annual university competition called Shell Eco Marathon. The goal is to buildthe car that consumes the least fuel during a race. KTH participated for the first time in 2006.The engine for this competition, DoubleTwo, has been developed within the school. Theprinciple is a two stroke counter piston HCCI engine with variable compression ratio. HCCIstands for homogenous charge compression ignition.

Through wing pattern, posture and movement, a harmless moth of the family Brenthia imitates an eight-eyed jumping spider. When an octopus of the species Thaumoctopus mimicus sense danger it can alter its appearance to that of a venomous sea snake. They are both drawing attention to themselves. Nevertheless, and because of this, they are protected. The mechanism is called mimicry.

A substation must be properly protected against lightning and other external effects to the equipment in the station or staff, for that we use relay protection. They should also protect against internal errors which may occur as ground faults. There are different types of protection relays, but most common are overcurrent-, distance-, residual current- and differential protection.The purpose of this thesis was to deepen our knowledge of relay protection and to use the theoretical knowledge we got from the university studies in the work process. In the process we discovered which parameters were the most essential and calculated these for all relay protections on the substation. We also carry out a comparison between two brands of relay protection, ABB and Alstom.During our work we will test and simulate the over-current relays in a program called NEPLAN, the program will also calculate the fault currents.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

In this modern period, societal and religious groups are strongly divided regarding the acceptability of abortion. Despite so many attempts by various groups to find a middle ground, the debate on abortion still remains largely polarized, at its most dramatic point with the extreme conservatives claiming abortion to be the moral equivalent of murder and the extreme liberals see it as devoid of moral import. And this polarization is due to the legal battle that continues to shadow moral discussions. An acceptance of an ethical nuance will here play as a concession on the deeply contested question of whether abortion should be a legally protected option for a woman, and to an extent blame for the continued crudeness which can be laid at the doorstep of a moral theory itself. Apparently, the ethical literature on abortion has focused almost exclusively on the tiniest moral assessment on whether and when abortion is morally permissible.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

Take your phone out from your pocket and look at it. Chances are that a certain California-based company made it; in 2013, it was quite likely. If you flip it over and remove the shell you have added (or look through the protective film), you might also learn that it was assembled in China. Flip it over again and look at the picture of something or someone you find great affection for, protected by yet another thin film. While who made it and who assembled it might vary, and it does not matter from now on, the other parts about protective barriers and personalization might be more accurate.

This study is an evaluation of the runtime watch function in a OEE software, knownas ProTAK. OEE stands for Overall Equipment Effectiveness, it?s a way to measurethe factories process efficiency. The runtimewatch function allows the user to setup and monitor certain critical objects that are of importance for the pulp and paper process at the mill. The data from the runtimewatch can be correlated towards the suppliers specification for the components.

The area around the stream Orsundaan, which runs trough the valley Harsbacksdalen, is famous for its beautiful landscape. The upper area of Orsundaan and Harsbacksdalen is situated just south of Heby in Uppland, Sweden. Even though the area is protected by different nature conservation acts, it is difficult to find any information about the geodiversity in the area. Geodiversity, or geological and geomorphological diversity, includes the concepts of geoprocesses and geoelements. Very high geodiversity could be seen at an inventory of the geomorphology in the upper area of Orsundaan and Harsbacksdalen.

Background: There is a newly founded national sports education program. This newly founded national sports program comprises of several different sports of which football is one of them. Before a football player can reach the European- or national elite the player usually is first developed in clubs and their respective academies where a lot of time is spent on fine tuning the players? individual skillsets.The main goal for the NIU program is to develop future elite athletes to different sports. When it comes to football, the Swedish Football Association and the Swedish school board have together developed a study plan which will serve as a guideline for the NIU-football classes in Sweden.

The fact that a duty of loyalty within the Swedish company law exists should be regarded as indisputable according to the Swedish doctrine, but its content and scope is however more severe identified. As the duty of loyalty is not regulated in the ABL and the fact that there are not many precedents in this area, means that it is difficult to know the boundaries of the company management´s duty of loyalty. It is also unclear whether the company management´s duty of loyalty to the company also is targeting the shareholders. It is this issue that we intend to discuss in the final chapter of this thesis. In order to answer our questions, we will in chapter two to six give an account of the foundation of the duty of loyalty and thereafter describe the management's duty of loyalty to the company.