This report describes the development of a well?functioning and aesthetically appealing web portal and associated database for a company called Svensk Kredit & Försäkringsförmedling AB (Translated: Swedish Credit & Insurance intermediation AB). The portal will test customers' creditworthiness through another company called Business Check in Sweden AB.Administrators to the web portal have a special user interface to display all customers, to disburse the money to the customer and edit customer information. A super?user interface is available for administrators where they can change the information on all administrator accounts.Many aspects of security has been addressed because the web portal will handle personal information.

The project has been performed in collaboration with Thule Sweden AB, a global leader in developing safe, simple and elegant solutions for the transportation of various types of equipment. The company has developed a new T-track which is telescopically, they stand mount system to connect the roof box to the roof rack does not fit into this. Therefore, the company considered that it was necessary to have a new product that meets the requirements of the new roof rack. They wanted a new, smarter solution would be developed. The bulk of this essay has been to find a new concept to connect the roof box to the roof racks. The result is a saxkonstruktion that slides down the roof rack T-profile and protected out of a puck-like housing. The product is small, simple and elegant solution.

The objective of this diploma work is to investigate a set of Multiple Input Multiple Output (MIMO) channel models compatible with the emerging IEEE 802.11n standard. This diploma work validates also advanced, innovative tools and wireless technologies that are necessary to facilitate wireless applications while maximizing spectral efficiency and throughput. MIMO channel models can be used to evaluate new Wireless Local Area Network (WLAN) proposals based on multiple antenna technologies. The purpose of this thesis is to investigate means of channel models and their implementation in different environments such as: Matlab, C++ and Advanced Design Systems (ADS). The investigation considers also a comparison between the channel models based on theoretical data and parameter setup to the channel models based on statistical characteristics obtained from measured data.

To build high-rise buildings made of timber has for long been limited by national laws, due to the lack of knowledge in engineering solutions. Frame structures made of wood has for a long time been associated with major fire hazards and consequently lower safety and this connection is still being made today. The increased environmental awareness in recent years has contributed to the exploitation of indigenous building materials, including wood from our own Swedish forests and has become increasingly common. Increased knowledge about how structures behave in fire and how they can be protected in order to achieve safe timber structures has resulted in a growing interest in these structures in the construction industry. Research in the area is constantly updated and new laws allow any number of storeys in wooden buildings in Sweden as long as the performance requirements are fulfilled.The main part of this work has involved calculations of the fire resistance and load bearing capacity of floor and wall constructions.

Feral animal populations are distributed over many parts of the world and are often seen as a problem. Since they are a threat against other species, destroy farmlands and can spread dis-eases, they are often referred to as pests. Artificial selection has contributed to loss of genetic diversity in our domesticated animals. Feral animal populations are affected by natural selec-tion, which allows them to adapt to the environment. Their ability to adapt is a reason to see them as pests but can also be seen as an asset.

To curb greenhouse gases and mitigate climate change is one of the biggest challenges human society face today. Carbon dioxide (CO2) has accumulated rapidly in the atmosphere as a consequence of burning of fossil fuels and deforestation. The aim of this study is to explore two methods to store carbon dioxide in geological formations and biological sinks. The aim is also to discuss the two mitigation options from a sustainable perspective and whether it can lead to a better environment and benefits for local and global societies. The research questions are: Which method to store carbon dioxide, geological or biological, is the most effective? Which method to store carbon dioxide, geological or biological, has the greatest potential to promote sustainable development for local communities?The method used is a comparative case study and presents four case studies that explore the potential for CO2 storage offshore in Norway and Brazil; and in tropical forests in Mexico and Brazil.

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

Through wing pattern, posture and movement, a harmless moth of the family Brenthia imitates an eight-eyed jumping spider. When an octopus of the species Thaumoctopus mimicus sense danger it can alter its appearance to that of a venomous sea snake. They are both drawing attention to themselves. Nevertheless, and because of this, they are protected. The mechanism is called mimicry.

Churches are seen as one of Sweden's most valuable cultural heritage. They bear witness to a living tradition and gives us knowledge of society at large and therefore people's lives at different times. These buildings possesses a high value, which is shared by the vast majority, and they are protected by law. The concept of modern churches is in this essay the churches built after 1940, which is not covered by law. The older churches has therefore a cultural and historical value which the modern churches lack.About 600 churches are built after the year of 1940 and the total number of churches in the country is 3400.

I examine how relationships between people and objects are created and continues through contiguity every time one use or touch an object and through participation through use and memories. The aim is to continue a relationship and to keep a communication alive with people beyond time and space, then, now and henceforth. I take advantage of and transform the traces in an object that belonged to someone. Parallel I create new space for bodies to put their mark for the first time. I compare my work with the Nordic Museum's task to preserve the present for the future.

certain building or environment can get a protection as a notable building if it contains certainvalues. These values are established by a certain category of people from the cultural sector.These people use established criterions to define the cultural value of the object. The objects canbe evaluated differently depending on who has done the evaluation. The people who protect thecultural environment and choose which buildings that are to be defining as notable buildingsoften uses a special model to characterise the different cultural values. This model is produced bya man called Axel Unnerbäck.

The thesis was done in collaboration with EAB situated in Smålandsstenar. In the initial discussion faze on doing a thesis with them there was a need to analyze and ensure the strength of an existing product, cantilever racks. This included performing FEM calculations on a model and comparing the results with physical tests.EAB has two models of cantilever racks, a light duty and a heavy duty. Within the heavy duty model series there are five product variants that differ in both size and load capacity. We will be working with the product variant with a load capacity of 1000 kg/arm which is the variant that is in the middle of the series.When we started work on the thesis we did a literature study and couldn?t find any well defined methodology that integrates both product development and computer aided design analysis.

This paper is an attempt to distinguish the specifics of the conflict resolution process and the negotiations during trade conflicts. First of all, this kind of conflict almost always contains some kind of protectionism which doesn?t make sense economically. Imposing trade-barriers decrease the overall welfare of your own nation and the only winner is the protected sector. These policies can be introduced since the political pressure from threatened industries is usually much stronger than the pressure from the consumers who will bear the burden of protectionism.

certain building or environment can get a protection as a notable building if it contains certainvalues. These values are established by a certain category of people from the cultural sector.These people use established criterions to define the cultural value of the object. The objects canbe evaluated differently depending on who has done the evaluation. The people who protect thecultural environment and choose which buildings that are to be defining as notable buildingsoften uses a special model to characterise the different cultural values. This model is produced bya man called Axel Unnerbäck.

Abstract This thesis is based on a case study of the drawn out legal process on the question of establish a limestone quarry in Bunge Ducker in north Gotland (Sweden). The current fields are located next to areas that are protected by virtue of being EU-certified Natura 2000-areas. Despite this, the Swedish governments and courts have not agreed in witch national interest that should be prevail when decisions are made on this issue. This phenomenon are reflected in the judicial process and different court have evaluate information differently in the case. A change among governmental actors where priority is given to the importance of national interest have occur in the later part in the process.