Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

Chemical substances are spread diffusely and uncontrollably as a result of the increased consumption of goods. REVAQ is a certification system that works to reduce the flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

The demands for higher production yields and better quality materials from the forests are increasing globally. Tree breeding programs are directed to meet the future demands on forests. In order to capture the full benefits from the breeding programs, clonal propagation is necessary. For most conifer species, somatic embryogenesis (SE) is the only available option for large scale clonal propagation of Elite clonal material. For Norway spruce (Picea abies L.

It is important to construct or recreate different types of wetlands and study their retention of nutrients, since knowledge of their effectiveness in this matter is poor. In 2003 a wetland was constructed on an old meadow on the western shore of Lake Bornsjön in central Sweden. The main purpose of the wetland was to reduce the amount of phosphorus entering the lake, which is the back-up water supply for Stockholm when the city cannot obtain water from Lake Mälaren. Large areas around Lake Bornsjön consist of agricultural land and the nutrient concentrations in the inflows to the lake are usually relatively high (approx. 1 mg/l total nitrogen and 0.05-0.1 mg/l total phosphorus).

The use of forage maize has increased over the last years. The aim of this litterateur review was to summarize a part of the research that has been conducted on forage maize for growing cattle, including cultivation and conservation of the maize. The forage maize is planted in April or the beginning of May when the temperature in the soil is between 6 and 10°C. Maize needs high temperatures and much water. Maize is harvested in the autumn when the dry matter (DM) is more then 30% or the plants have been exposed to the first frost in the autumn.

A new build in the Swedish nuclear power system would entail increased re-quirements for the proposed repository, which is adapted after the reactors of today. With a fast reactor, capable of burning nuclear waste, operating in parallel with the light water reactors, the increased requirements on the repository could be reduced.In this thesis, simulations of a light water reactor and a fast reactor have been performed by using the Monte Carlo code Serpent to investigate the changes in the fuel inventory. The light water reactor in the study is a boiling water reactor and the fast reactor of the type sodium-cooled fast reactor and they have been used for three different operation scenarios.By studying the fuel composition and the results from the simulations of the three scenarios conclusions can be drawn. Conclusions regarding the change of the fuel inventory and decay heat in Clab as well as the interim storage facility and in the repository. Depending on the operation alternative the changes dif-fered significantly and especially regarding the mass of burned actinides for different fuels in the fast reactor.The lowest increase of fuel assemblies was meet when using 50 years old fuel with 20MWd/kg U burnout and 2,0 % enrichment for start up of the fast reactor and 30 years old fuel assemblies with 50MWd/kg U burnout and 4,7 % enrichment for the further operation of the reactor.The increase of the number of fuel assemblies was 3174, which is equivalent to 641tons of heavy metal.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Detta examensarbete har utförts på Stena Aluminium (SA) i Älmhult. Undersökningen handlar om att mäta vätgashalten genom densitetsindexprover på smält aluminium, för att kartlägga hur vätgashalten påverkas av processtegen vid återvinning av aluminium i SAs produktions-anläggning. I arbetet ingick att undersöka vätgashalten för två olika legeringstyper (EN-AB 43400 och 46000), utvärdera avgasningseffektivitet för de utvalda legeringstyperna och att utvärdera den befintliga utgjutningssystemet. Mätningar för undersökningen är utförda i SAs smältverk, vid processtegen raffinering och utgjutning..

Stage-discharge equations for lakes without disharge measurementsSimon AnderssonIn 2015 all lakes, rivers, coastal water and groundwater should be of good ecological statusaccording to the water framework directive from the European Union. In the process ofimproving the quality of Swedish water bodies, knowledge of where problems occur isneeded in order to utilize the resources optimally. The ability of lakes to store water is animportant factor since it controls the flow of water through the country. A stage-dischargeequation is a mathematical relation between discharge from a lake and its water level. Bybetter understanding of stage-discharge equations for lakes, their storage capacity can bedescribed better in hydrological models.This master thesis aims to evaluate methods for determining stage-discharge equations forlakes where a variable amount of field measurements is available.

This report investigates a possible solution to the problem with adapting wave powerplants to work in countries with tidal water. The wire connecting the buoy at the surface with the generator at the bottom needs to adjust to the varying water depth. Our solution to this problem is to attach the wire to a jack which is then placed inside the buoy. The jack is then powered by an electric engine. The report discuss what forces the buoy will be exposed to and then the structural integrity of the design is evaluated through simulations.

Uvån Hagfors Teknologi AB (UHT) has developed a process ? GRANSHOT® ? for quicksolidification of metals in water baths. In the process liquid metal is splintered ? granulated ?into small drops. The drops are rapidly cooled in a water bath where all the heat energy from theliquid metal is transferred into the water.

The safety and safety work on OKG, Oskarshamns Kraftgrupp, is supervised by SKI, Swedish nuclear power inspectorate. The task of SKI is to inspect that the nuclear power plants of Sweden runs in a safe way. The proprietor of the permit who runs nuclear power plants has the responsibility to maintain the required safety to run a plant. SKI publishes a number of statue books that OKG has to meet to be able to run the plants. SKI recommends in SKIFS 2 004:1, that OKG work with the safety requirements of IAEA.

Report of diploma work conducted at the Swedish Radiation Safety Authority (SSM) as part of the bachelors program in Nuclear Engineering at Uppsala University.All nuclear power plants in Sweden are obliged to report any deficiency in their barriers or the defense in depth in obedience to SSM?s regulations concerning safety in nuclear facilities. In addition, there is an international system for reporting such events. The purpose of this thesis is to study the Swedish report system and to analyze the differences between Swedish and international event reporting.In the Swedish system, SSM?s regulations are effectuated by means of event reports classified as category 1-3, designed individually at each Swedish facility.

Hemp has been used for textiles for a long time in history until it became illegal to grow in many countries in the 1930s. It is interesting from an environmental point of view because it doesn?t need any pesticides and in most locations it doesn?t need any irrigation either, compared to cotton, which normally requires big amounts of both pesticides and water for irrigation. Hemp is a bast fiber, which means that the fibers are located on the bast of the stem (on the outer layer of the stem). Therefore they cannot be spun directly, they have to be removed from the stem first.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.