On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The Earths climate is changing at a higher rate, i.e between 1861 and 1994 the annual mean temperature in Scandinavia increased with 0,68º C and according to recent climate models the annual mean temperature is likely to rise with another 3º C during this century.A warmer climate in many ways is associated with changing conditions for lake ecosystems. An expected higher water temperature and a stronger summer stratification of the water column increases the risk of anoxic conditions at the lake bottom. Thus anoxic conditions are likely to cause a phosphate leakage from the sediment, i.e. a higher internal loading of phosphate.In this project, the extremely warm summer of 2002 has been used as an example for a possible scenario for a future climate. By comparing levels of phosphorus in the summer of 2002 with a ten-year median value, a phosphorus related sensitivity to climate change has been analyzed for 55 Swedish lakes.

This degree project aims to investigate the potential and possibilities for conceptual energyanalyses in the early stages of the design process. Many key decisions are made in theearly stages of a project regarding the shape and orientation of the building. Conceptualenergy analyses can provide the architects with insight regarding different design option?srelative energy performance.As the demands for more sustainable buildings increases, so does the need for earlyenergy analyses. Performing analyses in the early stage requires many assumptions andguesswork which could lead to a large margin of error.The offering from Autodesk is a module in Revit Architecture/MEP and the stand aloneprogram Project Vasari (under development).

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

This thesis compares different methods for risk assessment of a creosote contaminated site in Vansbro, Dalarna. In a complementary study the importance of using representative data for calibration and validation of stationary groundwater models is discussed. The time dependency between surface water levels and groundwater levels on the site in Vansbro is evaluated by step response analysis. The results show that the groundwater levels reflect only long-term variation in the surface water levels. Hence the use of such long-term means for calibration and validation of the stationary groundwater models is the only theoretically defendable alternative.As a first step in the comparison of risk assessment methods the degree of contamination is evaluated on the basis of generic guideline values for contaminated soils, developed by the Swedish Environmental Protection Agency.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

This thesis has been carried out at the Department of Urban and Rural Development at SLU Ultuna during the spring semester 2009. The topic of the paper is how energy consumption can be influenced through design and if the conditions for good design decreases when solutions based on energy efficiency are used. The report is divided into one literature study and one part where energy efficient solutions are used in a design. The thesis work has its origin in a project called "Energihus i Uppsala." The planned building will be a center for energy research in Uppsala. The project aims to demonstrate to the public what is currently happening in research related to energy.

An analysis of a specific application of anaerobic wastewater treatment at a pulp and board mill, Stora Enso Skoghall, was carried out. A literature study was done and effluent wastewater from CTMP pulp production was analyzed. The analysis consisted of a broad constituent analysis and an anaerobic treatment trial. Results from these test where used to calculate the treatment effectiveness and resulting energy potential at the mill.The literature study and constituent analysis showed that toxicity of the water to be treated, due to wood extractives and sulphur content, was of concern. Detoxification chemicals targeting these constituents where used in the anaerobic treatment trial.

Microwave is a time- efficient device for heating and reheating of foods. Despite the fact that its effects on foods have been evaluated during a long period of time, without any more negative effects shown compared to conventional cooking, one third of the Swedish population believes (in 2010) it accounts for a higher loss of nutrition. This literature review aim to compile studies regarding how food is affected by cooking in microwave, with respect to cooking losses, nutrition, secondary metabolites as well as sensory and textural aspects and compare it with conventional cooking. The compilation shows that different combination of effect (W), time and amount of water during microwave cooking have different effects on foods. The contents of proteins, vitamin B and carbohydrates are generally higher after microwave cooking, while anti-nutritional substances are affected much less during conventional cooking. This also depends on if it is of animal or non-animal origin. However, for the majority of nutrition values the differences are quite small.

Det finns mycket tidigare forskning och litteratur om hur design som kommunikationsmedel kan tilla?mpas i praktiken, ba?de genom estetisk och strategisk design. Da?remot framga?r inte huruvida tilla?mpningen av design som kommunikationsmedel a?r branschspecifik eller generellt ga?llande fo?r fo?retag oavsett bransch. Fo?retag kan nyttja design som ett kommunikationsmedel fo?r att kommunicera sin varuma?rkesidentitet till konsumenterna sa? att deras syn pa? imagen blir liksta?lld med identiteten.