Background: Folate is a water - soluble vitamin necessary for normal DNA synthesis among  other mechanisms. Folate deficiency can cause megaloblastic anemia resulting from abnormal erythrocyte d evelopment. At the Department of Clinical Chemistry, Linköping, analysis of folate is performed with Siemens ADVIA Centaur® XP which uses an immunochemical method with chemiluminimetric detection. Currently, the assay is conducted on serum, is poured off and frozen after 48 h and treated with light protection because folate is considered to be light sensitive.Methods: This study tested lithium heparin plasma for analysis of folate with Siemens ADVIA Centaur® XP with the aim to be able to perform a package of analyzes in anemia investigation from the same collection tube. Furthermore, the stability of folate was studied for up to 168 h and examined regarding light sensitivity.Results: Statistically significant higher values were obtained in the analysis of folate in lithium heparin plasma than folate in serum (p < 0,001).

Chile and Santiago are struggling with heavy environmental problems as a consequence of urbanisation and industrialisation. In the Santiago region the air is seriously contaminated and most of the rivers are classified as heavily polluted.The aim of this thesis is to survey the industrial fluid waste situation in the Santiago region and to make suggestions on technological improvements or process changes. The purpose is also to study five different enterprises more closely and to give more detailed suggestions for improvement. Another purpose is to summarize relevant Chilean legislation.Information, provided by the supervisory authority, about the release of industrial wastewater to rivers has been analysed. Deep interviews have been made with authorities and consultants.

Although Lean has received an increased amount of attention in the service context, research still has not established how successfully Lean manages to increase service productivity; since service productivity consists of both efficiency and quality. Research regarding productivity discusses the risk of a tradeoff between efficiency and quality in service production processes. Therefore, this thesis aims to explore if the tradeoff in a production setting with low variability in demand and low customer participation exists, after Lean has been implemented. With a qualitative approach, a case study has been conducted at Scandinavian Airlines Ground Handling to evaluate the effects of Lean in the baggage handling process. The result of the study shows that the tradeoff has not been overcome; efficiency has increased at the expense of quality.

Ungefär en tredjedel av maten som produceras i världen slängs. I Sverige slängs över 1,2 miljoner ton mat varje år. En stor del av det är så kallat matsvinn, onödigt matavfall som skulle kunna använts om den hanterats annorlunda. Matsvinn påverkar miljön och samhällsekonomin med förluster genom hela livsmedelskedjan och genom den avfallshantering matsvinnet ger upphov till. Matavfall kan användas för produktion av biogas, kompost och värme men det är bättre att reducera produktionen än att återanvända eller omvandla produkten. Svenska skolkök slänger runt 30 000 ton mat varje år, varav drygt hälften beräknas vara matsvinn.

Reverse logistics is getting more and more attention both from companies and the public. It is an area with the possibility for companies to do good in the eyes of the public. This work focus on the return system of a one-way handling material called the loading ledge. The loading ledge is developed by IKEA as a substitute for the EUR-pallet in transports from suppliers with a long distance and even flow and in transports from suppliers with short distance and uneven flow. The loading ledge is made out of 100 % recyclable plastic.The purpose of this work is to find the most efficient set-up for recycling of loading ledges within IKEA on a European level from a transport and handling point of view considering aspects like cost, environment, time and, from an administrative point of view, user-friendliness.Who will the participants of the set-up be, where will they be located, which transports are needed and which income and costs does the set-up generate, are questions that will be answered.

Pappersmakulatur uppstår i tryckpressarna, men orsakerna finns i företagets alla funktioner. För ett framgångsrikt förbättringsarbete med att minska makulaturen krävs därför att all personal är engagerad.Examensarbetet utfördes på Bobergs Tryckeri AB i Falun, ett familjeägt företag med 60 anställda, som producerar personifierad direktreklam och blanketter. Syftet var att undersöka hur pappersmakulaturen kan minska och målet var att hitta orsaker samt ge förslag på åtgärder för att minska den.Genom intervjuer med personalen kartlades produktionssprocessen och utifrån det utarbetades förbättringsförslag. Exempel på förbättringsförslag är att kontinuerligt mäta och rapportera makulaturen, förbättra kommunikationen mellan avdelningarna och utveckla färgstyrningen. Litteraturstudier och kontakter med nyckelpersoner inom branschorganisationer och andra liknande företag, var till stor hjälp i arbetet.

Stormwater in urban areas has been treated as a problem for a long time. The large proportion of impermeable surfaces inhibits the water from infiltrating in the ground to the same extent that it does in nature. This causes intensive surface flow during rain, which in turn causes inconveniences such as decreased accessability, floods and increased risk of desease spreading. Drainage through pipes is the traditional and usually functional metod for storm water disposal. That is as long as water flows are moderate. But precipitation varies naturally in amount and intensity and additional impermeable surfaces make some pipes insufficient for heavy or lasting precipitation.

Mitt examensarbete fra?n Designprogrammet ? ha?llbar utveckling, a?r en under- so?kning av flera dimensioner. Det o?vergripande arbetet a?r ett platsspecifikt insamlande av framtida visioner hos inva?nare, kommun och kreato?r. Visualiseringen involverar samtliga av de ovan na?mnda parterna i skapandet av en ny mo?tes- plats i ett medialt kategoriserat miljonprogramsomra?de.

Har riten en djupare mening, ett arv vi bär med oss och känner ett undermedvetet behov av? Kan riten ge oss tröst? Vad har riten för betydelse för oss?I mitt examensarbete har jag undersökt hur vi genom riten reflekterar och knyter an till erfarenheten av att vara människa. Jag har tittat på om riten finns i vår vardag, utan att vi ser den. Kan de olika upprepande och igenkännande handlingar i ett hem ge oss den trygghet som en rit kan ge? Riten kännetecknas genomkontinuitet, igenkänning, tillhörighet och tröst.

The aim of this study was to understand how the professional in social work handles the media scrutiny. When the media writes about social services there is seldom anything positive written about it, many social services organizations are instead heavily criticized and scrutinized by the media. When social services organizations are scrutinized by the media there is a crisis at work, and therefore should be handled as a crisis. Therefore, we describe how a crisis management might look like in an organization. The study is qualitative therefore we have interviewed four municipalities in Sweden that have been exposed by the media at a national level.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

In this work an assessment of the compressed air system in the facilities of Vattenfall Heat Uppsala has been conducted. The facilities constitutes, among others, a combined heat and power plant, and two waste incineration plants. The compressed air is supplied primarily by seven rotary screw compressors and yearly electric energy consumption in these has been determined. Furthermore, the usage of compressed air has been mapped in order to find processes with energy savings potential. Several suggestions how to reduce the usage of compressed air have been presented, resulting in decreased need of electric energy and reduced CO2-emissions.The results show that total need of electric energy in the compressors, during a standard production year, amounts to 5.83 GWh.

This report is our Master thesis. Our work has taken place at a one-stop-shop in Sölvesborg during the spring of 2002. We have conducted ethnographical studies concerning the one-stop-shops frontdesk and telephone exchange. During these studies we became aware of some differences under which the daily work was to be carried out. When operating the switchboard the staff usually work alone and perform the tasks individually.

The aims of the study were to investigate the prevalence and antibiotic resistance of Campylobacter jejuni and Campylobacter coli in chicken and chicken products, and to investigate farmer awareness of antibiotic resistance development. The study was conducted in the Can Tho province in Vietnam during six weeks in October to November 2008. Ninety-six samples from raw chickens were collected from twelve market places and analysed for the presence of Campylobacter. A total of 96 cloacal swabs from 20 farms were obtained and analysed for the presence of Campylobacter. Farmers were asked to answer eight questions concerning the housing of the chickens, modes of handling sick animals as well as use and knowledge of antibiotics and resistance development to antibiotics.

Ala sawmill in Ljusne, Hälsingland, has increased its flow through the sawing plant during the last couple of years. The problem now is the sorting plant, as this part of the mill is now slower than the rest. A close analysis of the sorting plant was therefore necessary to be able to increase the flow through. The aim of the project was to find solutions that can lessen downtime and increase flow. The goal was to increase the flow from 650 to 925 logs through the sorting plant per hour.